From: Jay L. <dan...@gm...> - 2012-07-26 23:23:31
|
Hi I've a 3ware 9750-16i4e RAID card with below configuration. OS: Debian wheezy Kernel: 3.2.0-3-amd64 Smartmontools version: 5.41+svn3365-1 Raid configuration: RAID1 - 2 x SATA disks Single disk(no raid) - 8 x SAS disks I'm getting errors like below: ================================ root@localhost:~# smartctl -a -d 3ware,1 /dev/twl0 smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-3-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Smartctl: Device Read Identity Failed: Input/output error A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. root@localhost:~# smartctl -a -d 3ware,0 /dev/twl0 smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-3-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Smartctl: Device Read Identity Failed: Input/output error A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. ================================ When -d 3ware,N was not given, I get some kernel messages. ================================ root@localhost:~# smartctl -a /dev/sdc smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-3-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Vendor: LSI Product: 9750-16i4e DISK Revision: 5.12 User Capacity: 599,988,895,744 bytes [599 GB] Logical block size: 512 bytes Logical Unit id: 0x600050e067ef9400a361000005240000 Serial number: N228A2TY67EF9400A361 Device type: disk Local Time is: Fri Jul 27 11:19:02 2012 NZST Device supports SMART and is Disabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Error Counter logging not supported Device does not support Self Test logging root@localhost:~# dmesg | grep 3w-sas [52053.324595] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x80. [52053.346070] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x80. [52213.061772] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x4D. [52213.083545] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x37. [52376.467719] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x4D. [52376.489407] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x37. [52378.017682] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x4D. [52378.039601] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x37. [52378.818857] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x4D. [52378.840649] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x37. [52447.927097] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x4D. [52447.949154] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x37. [52451.000956] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x4D. [52451.022879] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x37. [52760.709093] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x4D. [52760.730824] 3w-sas: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x37. ================================ What is correct command to view smart the health information? Regards Jay |