From: Christian F. <Chr...@t-...> - 2011-06-03 19:58:38
|
alfoele at libero.it wrote: > I'm trying to detect information by my new raidon GR3630 Raid enclosure. It > has an Oxford 934 DSB chipset (OXFW934DSB) and I'm querying it with the > following command: smartctl -a -d sat,12 /dev/discs/disc0/disc (the raid usb > device is connected via usb port to a linksys wrt610n router with ddwrt). > > The device answer to the above command is: > > Device Model: GR3630- 2S-WBS2 Raid 1 > Serial Number: [No Information Found] > Firmware Version: 091130.1 > User Capacity: 2,000,398,934,016 bytes > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: 6 > ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a > Local Time is: Thu Jun 2 15:21:48 2011 CEST > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > The SAT support of this USB chip does not help here because it only fakes some ATA IDENTIFY information for the logical RAID drive. > Error SMART Values Read failed: Input/output error > Smartctl: SMART Read Values failed. > > It does not support read of SMART attributes. > Any suggestion? I need to detect the disks temperature. > > Same issue as with many RAID controllers: Pass-through access to the physical drives behind the controller is not possible. May possibly work in non-RAID mode. Thanks, Christian |