From: Juergen B. <Jue...@we...> - 2010-06-22 19:53:48
|
>Have you used > >MHDD low level diagnostic . > >http://hddguru.com/ > >I have rewritten the documentation at: > >http://real-world-systems.com/docs/MHDD_en_manual.html > >Use SCAN to read the whole surface. > Did that. However, no error was found. Just some warnings. Guess they are caused by the sectors that took some extra time to be read. After that, the pending sector still showed up in the smart status. I guess something is wrong here with the smart-system: Pending sectors are reported, but there is no real problem. Could this be a firmware bug? Is it possible to update the firmware of a hard disk? Juergen >Change the options for a second run to remap the bad(?) spot. > > >Dennis > > > > >On Jun 18, 2010, at 3:01 PM, Juergen Bausa wrote: > >> My drive reports one pending sector, but the long test (issued after the >> >> report of the pending sector) does not find an error. I would like to >> >> reallocate the pending sector as described in the badblock-howto, but >> >> I am unable to do so because I cant get the number of the problematic >> >> sector. >> >> >> >> Here is the output of smartctrl (the errors reported in tests #11 and #16 >> >> have been corrected using the badblock-howto before. And yes, I know this >> >> drive might be dead soon, I have a backup). >> >> >> >> Regard, >> >> Juergen >> >> lisa:/home/jba# smartctl -a /dev/sda >> smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen >> Home page is http://smartmontools.sourceforge.net/ >> >> === START OF INFORMATION SECTION === >> Device Model: SAMSUNG HD103UI >> Serial Number: S1LMJ1BQB03018 >> Firmware Version: 1AA01113 >> User Capacity: 1.000.204.886.016 bytes >> Device is: In smartctl database [for details use: -P show] >> ATA Version is: 8 >> ATA Standard is: ATA-8-ACS revision 3b >> Local Time is: Fri Jun 18 20:27:38 2010 CEST >> >> ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details. >> >> SMART support is: Available - device has SMART capability. >> SMART support is: Enabled >> >> === START OF READ SMART DATA SECTION === >> SMART overall-health self-assessment test result: PASSED >> >> General SMART Values: >> Offline data collection status: (0x00) Offline data collection activity >> was never started. >> Auto Offline Data Collection: Disabled. >> Self-test execution status: ( 0) The previous self-test routine completed >> without error or no self-test has ever >> been run. >> Total time to complete Offline >> data collection: (14629) seconds. >> Offline data collection >> capabilities: (0x7b) SMART execute Offline immediate. >> Auto Offline data collection on/off support. >> Suspend Offline collection upon new >> command. >> Offline surface scan supported. >> Self-test supported. >> Conveyance Self-test supported. >> Selective Self-test supported. >> SMART capabilities: (0x0003) Saves SMART data before entering >> power-saving mode. >> Supports SMART auto save timer. >> Error logging capability: (0x01) Error logging supported. >> General Purpose Logging supported. >> Short self-test routine >> recommended polling time: ( 2) minutes. >> Extended self-test routine >> recommended polling time: ( 245) minutes. >> Conveyance self-test routine >> recommended polling time: ( 26) minutes. >> SCT capabilities: (0x003f) SCT Status supported. >> SCT Feature Control supported. >> SCT Data Table supported. >> >> SMART Attributes Data Structure revision number: 16 >> Vendor Specific SMART Attributes with Thresholds: >> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE >> 1 Raw_Read_Error_Rate 0x000f 100 094 051 Pre-fail Always - 2 >> 3 Spin_Up_Time 0x0007 074 074 011 Pre-fail Always - 8660 >> 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 665 >> 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 >> 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 >> 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 10839 >> 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 7366 >> 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 >> 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 4 >> 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 663 >> 13 Read_Soft_Error_Rate 0x000e 100 094 000 Old_age Always - 2 >> 183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 >> 184 Unknown_Attribute 0x0033 100 100 000 Pre-fail Always - 0 >> 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 950 >> 188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 >> 190 Airflow_Temperature_Cel 0x0022 059 043 000 Old_age Always - 41 (Lifetime Min/Max 18/41) >> 194 Temperature_Celsius 0x0022 057 042 000 Old_age Always - 43 (0 37 43 18) >> 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 4541840 >> 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 >> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 >> 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 >> 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 >> 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 >> 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 >> >> SMART Error Log Version: 1 >> No Errors Logged >> >> SMART Self-test log structure revision number 1 >> Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error >> # 1 Short offline Completed without error 00% 7360 - >> # 2 Extended offline Completed without error 00% 7351 - >> # 3 Short offline Completed without error 00% 7338 - >> # 4 Extended offline Completed without error 00% 7335 - >> # 5 Extended offline Completed without error 00% 7305 - >> # 6 Short offline Completed without error 00% 7299 - >> # 7 Short offline Completed without error 00% 7285 - >> # 8 Short offline Completed without error 00% 7266 - >> # 9 Short offline Completed without error 00% 7252 - >> #10 Extended offline Completed without error 00% 7234 - >> #11 Extended offline Completed: read failure 90% 7204 82252876 >> #12 Short offline Interrupted (host reset) 10% 7203 - >> #13 Short offline Completed without error 00% 7188 - >> #14 Short offline Completed without error 00% 7175 - >> #15 Short offline Completed without error 00% 7162 - >> #16 Short offline Completed: read failure 20% 7149 96220188 >> #17 Short offline Completed without error 00% 7114 - >> #18 Extended offline Completed without error 00% 7106 - >> #19 Short offline Completed without error 00% 7100 - >> #20 Short offline Completed without error 00% 7084 - >> #21 Short offline Completed without error 00% 7060 - >> >> SMART Selective self-test log data structure revision number 1 >> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS >> 1 0 0 Not_testing >> 2 0 0 Not_testing >> 3 0 0 Not_testing >> 4 0 0 Not_testing >> 5 0 0 Not_testing >> Selective self-test flags (0x0): >> After scanning selected spans, do NOT read-scan remainder of disk. >> If Selective self-test is pending on power-up, resume after 0 minute delay. >> ___________________________________________________________ >> GRATIS für alle WEB.DE Nutzer: Die maxdome Movie-FLAT! >> Jetzt freischalten unter http://movieflat.web.de >> >> ------------------------------------------------------------------------------ >> ThinkGeek and WIRED's GeekDad team up for the Ultimate >> GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the >> lucky parental unit. See the prize list and enter to win: >> http://p.sf.net/sfu/thinkgeek-promo >> _______________________________________________ >> Smartmontools-support mailing list >> Sma...@li... >> https://lists.sourceforge.net/lists/listinfo/smartmontools-support > ___________________________________________________________ WEB.DE DSL ab 19,99 Euro/Monat. Bis zu 150,- Euro Startguthaben und 50,- Euro Geldprämie inklusive! https://freundschaftswerbung.web.de |