From: Thane S. <ts...@au...> - 2007-05-09 14:37:10
|
I have a drive that says it's passing self tests, but the raw numbers look high (I know raw isn't critical, but still.) I've included the entire log below, but specifically, I'm looking at these: # 1 Extended offline Completed without error 00% 54 - [Date and Time] - [Parameter] - [Current] - [Worst] - [Raw] 05/08/2007 8:45:56 - Raw Read Error Rate - 100 - 100 - 143479 05/08/2007 8:45:56 - Reallocated Sector Count - 100 - 100 - 8589934592000 05/08/2007 8:45:56 - Seek Error Rate - 100 - 100 - 891 05/08/2007 8:45:56 - Hardware_ECC_Recovered - 100 - 100 - 780 05/08/2007 8:45:56 - Reallocated_Event_Count - 100 - 100 - 447348736 Is it reasonable to start getting worried with the raw numbers are steadily climbing on these attributes? T smartctl version 5.38 [i686-mingw32-xp-sp2] Copyright (C) 2002-7 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Fujitsu MHV series Device Model: FUJITSU MHV2100BH PL Serial Number: NW98T6529558 Firmware Version: 00000029 User Capacity: 100,030,242,816 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Wed May 09 08:31:05 2007 MDT SMART support is: Available - device has SMART capability. Enabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 32) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 591) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 69) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 59450 2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 27525540 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 101 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 8589934592000 7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 891 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0 9 Power_On_Seconds 0x0032 100 100 000 Old_age Always - 91h+21m+56s 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 64 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 15 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1111 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 39 (Lifetime Min/Max 10/50) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 481 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 447348736 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 8798 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 3732310196117 240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 54 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. |