]# smartctl  -d ata -a /dev/sda

smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen

Home page is http://smartmontools.sourceforge.net/

 

=== START OF INFORMATION SECTION ===

Device Model:     ST3320620NS

Serial Number:    9QFC7YNK

Firmware Version: 3.AEK

User Capacity:    320,072,933,376 bytes

Device is:        Not in smartctl database [for details use: -P showall]

ATA Version is:   7

ATA Standard is:  Exact ATA specification draft version not indicated

Local Time is:    Fri Nov 21 12:46:54 2008 CST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

See vendor-specific Attribute list for marginal Attributes.

 

General SMART Values:

Offline data collection status:  (0x82) Offline data collection activity

                                        was completed without error.

                                        Auto Offline Data Collection: Enabled.

Self-test execution status:      (   0) The previous self-test routine completed

                                        without error or no self-test has ever

                                        been run.

Total time to complete Offline

data collection:                 ( 430) seconds.

Offline data collection

capabilities:                    (0x5b) SMART execute Offline immediate.

                                        Auto Offline data collection on/off support.

                                        Suspend Offline collection upon new

                                        command.

                                        Offline surface scan supported.

                                        Self-test supported.

                                        No Conveyance Self-test supported.

                                        Selective Self-test supported.

SMART capabilities:            (0x0003) Saves SMART data before entering

                                        power-saving mode.

                                        Supports SMART auto save timer.

Error logging capability:        (0x01) Error logging supported.

                                        General Purpose Logging supported.

Short self-test routine

recommended polling time:        (   1) minutes.

Extended self-test routine

recommended polling time:        ( 107) minutes.

 

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME      FLAG  VALUE  WORST  THRESH   TYPE      UPDATED  WHEN_FAILED RAW_VALUE

  1 Raw_Read_Error_Rate       0x000f    111      095      006     Pre-fail       Always       -            76795511

  3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  Always       -       0

  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       11

  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0

  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       987058

  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       40

 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0

 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       11

187 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0

189 Unknown_Attribute       0x003a   100   100   000    Old_age   Always       -       0

190 Unknown_Attribute       0x0022   058   040   045    Old_age   Always   In_the_past  706281514

194 Temperature_Celsius     0x0022   042   060   000    Old_age   Always       -       42 (Lifetime Min/Max 0/22)

195 Hardware_ECC_Recovered  0x001a   078   061   000    Old_age   Always       -       161958605

197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0

198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0

199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0

200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0

202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

 

SMART Error Log Version: 1

No Errors Logged

 

SMART Self-test log structure revision number 1

 

SMART Selective self-test log data structure revision number 1

 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay. Hi,Bruce Allen
         Can you help me?  pls look at this message about smartctl , the disk is ok ?
 
_____________________



更多热辣资讯尽在新版MSN首页! 立刻访问!