Hi Adam,
 
what kernel version are you using?
Are you using hdparm or sdparm to sleep your drive?
 
all the best,
 
bruno





> From: smartmontools-support-request@lists.sourceforge.net
> Subject: Smartmontools-support Digest, Vol 20, Issue 7
> To: smartmontools-support@lists.sourceforge.net
> Date: Tue, 22 Jan 2008 17:06:23 -0800
>
> Send Smartmontools-support mailing list submissions to
> smartmontools-support@lists.sourceforge.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.sourceforge.net/lists/listinfo/smartmontools-support
> or, via email, send a message with subject or body 'help' to
> smartmontools-support-request@lists.sourceforge.net
>
> You can reach the person managing the list at
> smartmontools-support-owner@lists.sourceforge.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Smartmontools-support digest..."
>
>
> Today's Topics:
>
> 1. Re: distributing smartd (Bruce Allen)
> 2. Re: Diskstatus via SNMP (Michael Mansour)
> 3. Replaced HDD; getting ata exceptions and occasional crashes
> again. (Adam Funk)
> 4. Re: Replaced HDD; getting ata exceptions and occasional
> crashes again. (Justin Piszcz)
> 5. 3ware 9650SE-24M8 and 16 device limit of smartd/smartctl
> (Justin C. Darby)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 16 Jan 2008 22:24:58 -0600 (CST)
> From: Bruce Allen <ballen@gravity.phys.uwm.edu>
> Subject: Re: [smartmontools-support] distributing smartd
> To: kabbalah74-unsec@yahoo.com
> Cc: smartmontools-support@lists.sourceforge.net
> Message-ID: <Pine.LNX.4.63.0801162224480.19609@trinity.phys.uwm.edu>
> Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed
>
> Thanks -- I just wrote to him.
>
> On Wed, 16 Jan 2008, kabbalah74-unsec@yahoo.com wrote:
>
> >> I'd be interested in adding SNMP functions to smartd, so it can send traps
> >
> > > directly and respond to service requests. Anyone interested in coding
> >
> > > this? Is it hard? Could one make use of this library:
> >
> > > http://www.net-snmp.org/ ?
> >
> > >
> >> Cheers,
> >
> > > Bruce
> >
> >
> > I saw some emails a year or so ago from 'Helmut Manck' on this mailing list saying that he had a patch to enable some SNMP functionality. Maybe you could contact him to see if he's interested in doing a full implementation..
> > Krisztian
> >
> >
>
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 17 Jan 2008 14:33:14 +1000
> From: "Michael Mansour" <mic@npgx.com.au>
> Subject: Re: [smartmontools-support] Diskstatus via SNMP
> To: Bruce Allen <ballen@gravity.phys.uwm.edu>, Helmut Manck
> <helmuth@mikro.ee.tu-berlin.de>
> Cc: smartmontools-support@lists.sourceforge.net
> Message-ID: <20080117043204.M96793@npgx.com.au>
> Content-Type: text/plain; charset=iso-8859-1
>
> Hi Bruce,
>
> > Hi Helmut,
> >
> > I apologize that it's been almost two years for a reply. Yes, I
> > would be quite interested in this. Are you still interested and
> > able to do this?
>
> This is a great idea. With such a feature available with smartd this would
> help admins graph smartd metrics using rrd to view trend analysis etc.
>
> Regards,
>
> Michael.
>
> > Cheers,
> > Bruce
> >
> > On Mon, 13 Mar 2006, Helmut Manck wrote:
> >
> > > Hi Bruce,
> > >
> > > some time ago, I made a patch to add SNMP support to smartd. I think it would
> > > be a quite usefull extension for smartmon in general, so I would love to see
> > > this integrated, maybe to be enabled by autoconf-switch. What do you think?
> > >
> > > Best regards,
> > > Helmut
> > >
> > >
> > > -------------------------------------------------------
> > > This SF.Net email is sponsored by xPML, a groundbreaking scripting language
> > > that extends applications into web and mobile media. Attend the live webcast
> > > and join the prime developer group breaking into this new coding territory!
> > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> > > _______________________________________________
> > > Smartmontools-support mailing list
> > > Smartmontools-support@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/smartmontools-support
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > Smartmontools-support mailing list
> > Smartmontools-support@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/smartmontools-support
> ------- End of Original Message -------
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 18 Jan 2008 14:36:00 +0000
> From: Adam Funk <a24061@ducksburg.com>
> Subject: [smartmontools-support] Replaced HDD; getting ata exceptions
> and occasional crashes again.
> To: smartmontools-support@lists.sourceforge.net
> Message-ID: <g3q665-via.ln1@news.ducksburg.com>
> Content-Type: text/plain; charset=us-ascii
>
> Back in April I started a thread called "ATA error count increasing ---
> should I worry?"
>
> http://thread.gmane.org/gmane.linux.utilities.smartmontools/4528
>
> I took the computer back the shop last summer with printouts of error
> messages and some of the information I got here. They did some tests
> for a few days and replaced the hard drive (with a larger Samsung
> model; I paid the difference to upgrade). I copied my data from the
> old one and wiped it without any problems and gave it back to them.
>
> At some point in the past few months the ata errors started appearing
> occasionally again in the syslog, and if I'm using the computer at the
> time, I can tell when it's happening: it freezes up for a few seconds
> and then something like [1] appears.
>
> In the past two weeks, the computer has also "lost" the hard drive
> connection a couple of times: it locked up completely; I pressed the
> reset button; the BIOS couldn't find the drive; I unplugged and
> replugged the SATA cable at the port (sometimes switching between the
> two ports); it started working again. This only happens when I'm not
> sitting at the machine.
>
> I've run the smartctl tests and to the best of my limited knowledge
> the results are OK: [2].
>
> I think the problem must be in the SATA controller or nearby on the
> motherboard electronics (the SATA ports are built-in); can anyone
> advise on this?
>
> Thanks,
> Adam
>
>
> [1]
> Jan 15 21:53:54 bunsen kernel: [172805.880000] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x3850000 action 0x2 frozen
> Jan 15 21:53:55 bunsen kernel: [172805.880000] ata1.00: cmd 25/00:00:0f:41:2b/00:01:2a:00:00/e0 tag 0 cdb 0x0 data 131072 in
> Jan 15 21:53:55 bunsen kernel: [172805.880000] ata1: hard resetting port
> Jan 15 21:53:55 bunsen kernel: [172806.916000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> Jan 15 21:53:55 bunsen kernel: [172806.948000] ata1.00: configured for UDMA/133
> Jan 15 21:53:55 bunsen kernel: [172806.948000] ata1: EH complete
>
>
> [2]
> smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Device Model: SAMSUNG HD403LJ
> Serial Number: S0NFJ13P200885
> Firmware Version: CT100-10
> User Capacity: 400,088,457,216 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 8
> ATA Standard is: Not recognized. Minor revision code: 0x52
> Local Time is: Fri Jan 18 14:32:47 2008 GMT
>
> ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.
>
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (8283) seconds.
> Offline data collection
> capabilities: (0x5b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> No Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 142) minutes.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 1
> 3 Spin_Up_Time 0x0007 100 100 015 Pre-fail Always - 7424
> 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 32
> 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
> 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
> 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
> 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3272
> 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
> 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 32
> 187 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
> 188 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
> 190 Temperature_Celsius 0x0022 065 058 000 Old_age Always - 35
> 194 Temperature_Celsius 0x0022 133 112 000 Old_age Always - 35
> 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 9636666
> 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
> 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
> 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
> 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
> 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
> 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0
>
> SMART Error Log Version: 1
> ATA Error Count: 52 (device log contains only the most recent five errors)
> CR = Command Register [HEX]
> FR = Features Register [HEX]
> SC = Sector Count Register [HEX]
> SN = Sector Number Register [HEX]
> CL = Cylinder Low Register [HEX]
> CH = Cylinder High Register [HEX]
> DH = Device/Head Register [HEX]
> DC = Device Command Register [HEX]
> ER = Error register [HEX]
> ST = Status register [HEX]
> Powered_Up_Time is measured from power on, and printed as
> DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
> SS=sec, and sss=millisec. It "wraps" after 49.710 days.
>
> Error 52 occurred at disk power-on lifetime: 1887 hours (78 days + 15 hours)
> When the command that caused the error occurred, the device was active or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 84 51 80 77 84 21 e7 Error: ICRC, ABRT 128 sectors at LBA = 0x07218477 = 119637111
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 80 77 84 21 e7 00 00:02:42.813 READ DMA
> c8 00 80 f7 83 21 e7 00 00:02:42.813 READ DMA
> c8 00 80 77 83 21 e7 00 00:02:42.813 READ DMA
> c8 00 80 f7 82 21 e7 00 00:02:42.813 READ DMA
> c8 00 80 77 82 21 e7 00 00:02:42.813 READ DMA
>
> Error 51 occurred at disk power-on lifetime: 1887 hours (78 days + 15 hours)
> When the command that caused the error occurred, the device was active or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 84 51 00 5f d8 6e ec Error: ICRC, ABRT at LBA = 0x0c6ed85f = 208590943
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 00 5f d8 6e ec 00 17d+14:39:23.329 READ DMA
> c8 00 d8 5f d6 6e ec 00 17d+14:39:23.329 READ DMA
> c8 00 00 5f d5 6e ec 00 17d+14:39:23.267 READ DMA
> c8 00 00 5f d4 6e ec 00 17d+14:39:23.267 READ DMA
> c8 00 00 5f d3 6e ec 00 17d+14:39:23.267 READ DMA
>
> Error 50 occurred at disk power-on lifetime: 1814 hours (75 days + 14 hours)
> When the command that caused the error occurred, the device was active or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 84 51 80 57 76 86 eb Error: ICRC, ABRT 128 sectors at LBA = 0x0b867657 = 193361495
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 80 57 76 86 eb 00 14d+14:22:29.954 READ DMA
> c8 00 08 d7 04 0b ec 00 14d+14:22:29.892 READ DMA
> c8 00 08 2f 08 08 ec 00 14d+14:22:29.892 READ DMA
> c8 00 08 07 ff 0c ec 00 14d+14:22:29.892 READ DMA
> c8 00 08 3f 57 0c ec 00 14d+14:22:29.892 READ DMA
>
> Error 49 occurred at disk power-on lifetime: 1478 hours (61 days + 14 hours)
> When the command that caused the error occurred, the device was active or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 84 51 00 cf 62 60 eb Error: ICRC, ABRT at LBA = 0x0b6062cf = 190866127
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 00 cf 62 60 eb 00 14:04:44.954 READ DMA
> c8 00 a0 df d7 6f eb 00 14:04:44.892 READ DMA
> c8 00 40 97 d7 6f eb 00 14:04:44.892 READ DMA
> ca 00 08 2f 01 f8 ed 00 14:04:44.829 WRITE DMA
> ca 00 08 17 05 f4 ed 00 14:04:44.829 WRITE DMA
>
> Error 48 occurred at disk power-on lifetime: 1478 hours (61 days + 14 hours)
> When the command that caused the error occurred, the device was active or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 84 51 b8 37 a1 5a eb Error: ICRC, ABRT 184 sectors at LBA = 0x0b5aa137 = 190488887
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 b8 37 a1 5a eb 00 13:58:25.454 READ DMA
> c8 00 58 c7 a7 5a eb 00 13:58:25.329 READ DMA
> c8 00 18 9f a7 5a eb 00 13:58:25.329 READ DMA
> c8 00 20 77 a7 5a eb 00 13:58:25.329 READ DMA
> c8 00 08 5f a7 5a eb 00 13:58:25.329 READ DMA
>
> SMART Self-test log structure revision number 1
> Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
> # 1 Short offline Completed without error 00% 3269 -
> # 2 Extended offline Completed without error 00% 3199 -
> # 3 Short offline Completed without error 00% 3195 -
> # 4 Short offline Completed without error 00% 102 -
>
> SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
> SMART Selective self-test log data structure revision number 0
> Warning: ATA Specification requires selective self-test log data structure revision number = 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 18 Jan 2008 12:27:33 -0500 (EST)
> From: Justin Piszcz <jpiszcz@lucidpixels.com>
> Subject: Re: [smartmontools-support] Replaced HDD; getting ata
> exceptions and occasional crashes again.
> To: Adam Funk <a24061@ducksburg.com>
> Cc: smartmontools-support@lists.sourceforge.net
> Message-ID: <alpine.DEB.0.999999.0801181226210.23565@p34.internal.lan>
> Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed
>
>
>
> On Fri, 18 Jan 2008, Adam Funk wrote:
>
> > Back in April I started a thread called "ATA error count increasing ---
> > should I worry?"
> >
> > http://thread.gmane.org/gmane.linux.utilities.smartmontools/4528
> >
>
> That's usually not good, I got 1 disk out of 4 750GiB and one kept doing that
> resetting continuously, same thing with a raptor I bought once I rma'd them
> immediately.
>
> If it only does it spuriously, DISABLE NCQ on the drive, and the problem
> should go away. If it doesn't, it is either a:
>
> 1. cable issue
> 2. controller issue
> 3. drive electrical/issue
> 4. mobo/psu/issue (ulikley)
>
> Justin.
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 22 Jan 2008 19:06:13 -0600
> From: "Justin C. Darby" <jcdarby@usgs.gov>
> Subject: [smartmontools-support] 3ware 9650SE-24M8 and 16 device limit
> of smartd/smartctl
> To: smartmontools-support@lists.sourceforge.net
> Message-ID: <47969305.2050003@usgs.gov>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi,
>
> I've got a 3ware 9650SE-24M8 I wanted to monitor with smartd since 3dm2
> can't interface to the smart monitoring on these drives (it's not in the
> database for smartd, either, let me know if I can send something to help).
>
> The 3ware option for smartctl/smartd is hard coded to ignore any drive
> outside of the range between 0 and 15. I needed 0 to 23. I went through
> smartctl.cpp and smartd.cpp, and after not seeing any reason why that
> limit was set, literally changed the comparison from 15 to 23 and I'm up
> and running now.
>
> Old:
>
> # smartctl -d 3ware,23 -S on -o on -a /dev/twa0
> smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6
> Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> =======> INVALID ARGUMENT TO -d: 3ware,23
> =======> VALID ARGUMENTS ARE: ata, scsi, marvell, sat, 3ware,N,
> hpt,L/M/N cciss,N <=======
> =======> Option -d 3ware,N (N=23) must have 0 <= N <= 15
>
> Use smartctl -h to get a usage summary
>
> New:
>
> # ./smartctl -d 3ware,23 -S on -o on -a /dev/twa0
> smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6
> Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Device Model: ST31000340NS
> Serial Number: (removed, this is how Seagate does warranty requests,
> oddly)
> Firmware Version: SN03
> User Capacity: 1,000,204,886,016 bytes
> Device is: Not in smartctl database [for details use: -P showall]
> ATA Version is: 6
> ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
> Local Time is: Tue Jan 22 18:47:45 2008 CST
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> (output snipped)
>
> It's a pretty trivial 4 line change, so I'm not sure if it's worth a
> patch, however, here goes:
>
> diff -u smartmontools-5.37.orig/smartctl.cpp smartmontools-5.37/smartctl.cpp
> --- smartmontools-5.37.orig/smartctl.cpp 2006-10-09
> 06:45:12.000000000 -0500
> +++ smartmontools-5.37/smartctl.cpp 2008-01-22 18:50:57.000000000 -0600
> @@ -463,8 +463,8 @@
> if (split_report_arg2(s, &i)) {
> sprintf(extraerror, "Option -d 3ware,N requires N to
> be a non-negative integer\n");
> badarg = TRUE;
> - } else if (i<0 || i>15) {
> - sprintf(extraerror, "Option -d 3ware,N (N=%d) must
> have 0 <= N <= 15\n", i);
> + } else if (i<0 || i>23) {
> + sprintf(extraerror, "Option -d 3ware,N (N=%d) must
> have 0 <= N <= 23\n", i);
> badarg = TRUE;
> } else {
> // NOTE: controller_port == disk number + 1
> diff -u smartmontools-5.37.orig/smartd.cpp smartmontools-5.37/smartd.cpp
> --- smartmontools-5.37.orig/smartd.cpp 2006-11-11 22:49:09.000000000 -0600
> +++ smartmontools-5.37/smartd.cpp 2008-01-22 18:50:59.000000000 -0600
> @@ -3038,8 +3038,8 @@
> PrintOut(LOG_CRIT, "File %s line %d (drive %s): Directive
> -d 3ware,N requires N integer\n",
> configfile, lineno, name);
> badarg=1;
> - } else if ( i<0 || i>15) {
> - PrintOut(LOG_CRIT, "File %s line %d (drive %s): Directive
> -d 3ware,N (N=%d) must have 0 <= N <= 15\n",
> + } else if ( i<0 || i>23) {
> + PrintOut(LOG_CRIT, "File %s line %d (drive %s): Directive
> -d 3ware,N (N=%d) must have 0 <= N <= 23\n",
> configfile, lineno, name, i);
> badarg=1;
> } else {
>
> Unfortunately, I can't test older controllers to know if this breaks
> things. It works for me.
>
> Let me know if there's anything else I can provide to be of assistance.
>
> Thanks,
> Justin C. Darby
>
>
>
> ------------------------------
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>
> ------------------------------
>
> _______________________________________________
> Smartmontools-support mailing list
> Smartmontools-support@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/smartmontools-support
>
>
> End of Smartmontools-support Digest, Vol 20, Issue 7
> ****************************************************



Windows Live Messenger 2008 vient de sortir, découvrez son nouveau design ! Téléchargez gratuitement Messenger 2008