Id Refs Address Size Name
1 5 0xffffffff80200000 11cdab0 kernel
2 1 0xffffffff813ce000 10278 ciss.ko
Also have enabled in /boot/loader.conf
<COMPAQ RAID 1(1VOLUME OK> at scbus0 target 0 lun 0 (pass0,da0)
<HP EH0146FAWJB HPDH> at scbus1 target 0 lun 0 (pass1)
<HP EH0146FAWJB HPDH> at scbus1 target 1 lun 0 (pass2)
<HP HSV200 6220> at scbus2 target 0 lun 0 (pass3)
<HP HSV200 6220> at scbus2 target 1 lun 0 (pass4)
<HP HSV200 6220> at scbus3 target 0 lun 0 (pass5)
<HP HSV200 6220> at scbus3 target 1 lun 0 (pass6)
Pass3-6 are the HP san, no disks are current present to the system, this server doesn’t need any.
Sorry thought I had posted the devlist previously,
When I try to run the command I posted earlier, I get errors. I see some SMART info, just concerned about the errors and on other HP servers I manage, I don’t have these error, different generation of hardware, but running same version of FreeBSD 9.0
You are trying to get information from the chassis, but not from the disk. Are you using ciss driver?
On 06/17/2012 10:33 PM, Peter Sprokkelenburg wrote:
I’m in the process of setting up some servers on our blade chassis’
- HP BL460C G1 with E200i FW version – v1.86
2 x 146GB HP SAS drives.
- FreeBSD 9.0-RELEASE-p3 amd64
Just installed smartmontools and getting some errors
#smartctl -a /dev/pass1
smartctl 5.42 2011-10-20 r3458 [FreeBSD 9.0-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net