I am deploying new Hitachi 4TB (HDS5C4040ALA630) hard drives on our storage servers (running GlusterFS).  I wanted to submit the following information for inclusion of this new drive for the smartctl database.

 

[root@gfs02 ~]# smartctl -a /dev/sdb

smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build)

Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

 

=== START OF INFORMATION SECTION ===

Device Model:     Hitachi HDS5C4040ALE630

Serial Number:    PL2310LAG0HZLC

Firmware Version: MPAOA250

User Capacity:    4,000,787,030,016 bytes

Device is:        Not in smartctl database [for details use: -P showall]

ATA Version is:   8

ATA Standard is:  ATA-8-ACS revision 4

Local Time is:    Sun Jun 24 07:39:42 2012 CDT

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

 

General SMART Values:

Offline data collection status:  (0x85) Offline data collection activity

                                        was aborted by an interrupting command from host.

                                        Auto Offline Data Collection: Enabled.

Self-test execution status:      (   0) The previous self-test routine completed

                                        without error or no self-test has ever

                                        been run.

Total time to complete Offline

data collection:                 (  28) seconds.

Offline data collection

capabilities:                    (0x5b) SMART execute Offline immediate.

                                        Auto Offline data collection on/off support.

                                        Suspend Offline collection upon new

                                        command.

                                        Offline surface scan supported.

                                        Self-test supported.

                                        No Conveyance Self-test supported.

                                        Selective Self-test supported.

SMART capabilities:            (0x0003) Saves SMART data before entering

                                        power-saving mode.

                                        Supports SMART auto save timer.

Error logging capability:        (0x01) Error logging supported.

                                        General Purpose Logging supported.

Short self-test routine

recommended polling time:        (   1) minutes.

Extended self-test routine

recommended polling time:        ( 255) minutes.

SCT capabilities:              (0x003d) SCT Status supported.

                                        SCT Feature Control supported.

                                        SCT Data Table supported.

 

SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0

  2 Throughput_Performance  0x0005   135   135   054    Pre-fail  Offline      -       99

  3 Spin_Up_Time            0x0007   142   142   024    Pre-fail  Always       -       548 (Average 434)

  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       13

  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0

  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0

  8 Seek_Time_Performance   0x0005   113   113   020    Pre-fail  Offline      -       42

  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       705

10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0

12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       13

192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       39

193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       39

194 Temperature_Celsius     0x0002   176   176   000    Old_age   Always       -       34 (Lifetime Min/Max 22/47)

196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0

197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0

198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0

199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

 

SMART Error Log Version: 1

No Errors Logged

 

SMART Self-test log structure revision number 1

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error

# 1  Short offline       Completed without error       00%       705         -

# 2  Short offline       Completed without error       00%       316         -

# 3  Short offline       Completed without error       00%       292         -

# 4  Short offline       Completed without error       00%       268         -

# 5  Short offline       Completed without error       00%       244         -

# 6  Short offline       Completed without error       00%       220         -

# 7  Short offline       Completed without error       00%       196         -

# 8  Short offline       Completed without error       00%       175         -

# 9  Short offline       Completed without error       00%       148         -

#10  Short offline       Completed without error       00%       124         -

#11  Short offline       Completed without error       00%       100         -

 

SMART Selective self-test log data structure revision number 1

SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 

Thanks in advance,

Larry Bates

vitalEsafe, Inc.