scigraphica-gtkextra — Development discussion of the gtkextra library

[gtkextra] Images attached to sheet not moveable/sizeable

[oliver <dr...@th...>]

Hi
 
I would like to have images created/pasted into/onto my (GTKExtra) sheets.
I can paste an image from the clipboard and use "attach" or "put" to get
there, though I first put the image inside an event-box and attach that.
 
However, once there, the "image/plot" is "fixed" in "location and size" etc.

 
I can implement the same bit as in the testgtksheet example with gtk_curve,
but that pasted "image" is also in a fixed place and of fixed size.
 
Rather, I would like the "image" to be as one might find "charts" in Excel.
That is, they are "truly floating/sizeable" etc. on a given sheet etc
(though for now I could live with just "images" coming in as PixBuf's)
 
I have played around with the testimage.c example.  That seems to have the
features I am looking for, but I want the "moveable/sizeable" plot to be as
an item attached to a sheet, rather than, apparently one layer of a canvas
on top of another layer of a canvas.   I can't figure out how to use
"canvas's" in the way I would like.   Also, the "plot" s/r's seem to be
PixMap oriented, where as some of the image data arrives as PixBuf (and I
have not found a suitable "converter").
 
Any assistance or pointing in the right direction would be appreciated,
again for now just attach/put an image that is sizeable/moveable etc would
be sufficient (cf. a full plotting structure etc).
 
Cheers
 
DrO

[gtkextra] (A few more) GtkExtra/Glade pallete icons

[oliver <dr...@th...>]

We got a bit tired of the various missing Glade pallette icons for GtkExtra,
so we created a few of them.   These are just for the 22x22, and go into the
usual place /share/Glade3 .... along with the other Gtk/GtkExtra icons.
 
There are a couple of "extra" icons intended as "starting" points for
creating more.
 
We will probably create a few more eventually (though we create most of our
progs directly in code c.f. Glade).
 
Hope it helps somebody ... happy holidays
 
DrO
 

Re: [gtkextra] GtkExtra wont compile to DLL on MingW64 WinXP64 orWin7/64

[oliver <dr...@th...>]

Dr Mr Paquet et al:
 
Cheers for that, and sorry about the lateness of my update, but in fact the
post by Tom Schoonjans (see below) held the solution, and with those steps,
the 64bit variant also compiles  under Mingw64-x86 (incidentally, I did note
that the 32 bit variant compiled already under Mingw64_i686, so clearly the
comdlg32.dll must have existed, and been OK).
 
Many thanks to Tom Schoonjans.
 
For completeness. The post by Tom Schoonjans:
 
------------------------------
The developers are aware of this problem: it has to do with the fact that
the tarballs were generated on Centos6, which ships with an old version of
libtool, and produces tarballs that are not compatible with MinGW64.

The solution is simple: install the most recent versions of autoconf,
automake and libtool, and run 'autoreconf -if' within the unpacked source
tarball. It should work properly then.

Best regards,

Tom
 
------------------------------
 
As I had all of the latest versions of the request tools already installed,
it was simply a matter of
 
autoreconf -if
 
./configure --prefix=....   enable-glade &&\
make && \
make install
 
 
 
Incidentally, as a kind of by-product, there was a weird problem with the
3.3.0 release in that (for reasons unknown to us) it produced a "duff
config.h" (e.g. all the macro's were undefined etc, and so under the 32 bit
build we had to create the config.h manually).  With the autoreconf, it
produces the config.h correctly also with 3.3.0.
 
... we tested it with 3.3.3 also, and it worked, but we are sticking with
3.3.0 for now since we had implemented some proprietary changes to the
GtkExtra 3.3.0 source which we wish to retain for the moment.
 
 
 
Many thanks to all
 
DrOli
 

-----Original Message-----
From: FredyPaquet [mailto:fr...@op...] 
Sent: 15 December 2016 00:54
To: oliver
Cc: sci...@li...
Subject: AW: [gtkextra] GtkExtra wont compile to DLL on MingW64 WinXP64
orWin7/64


Hello oliver

This looks like a problem in your toolchain.

We're cross-compiling GtkExtra V3.3.3 and Gtk V2.24.28 for Win 32-Bit and
64-Bit without any problems here. 

I would double check the linker path, because you mentioned that comdlg.ddl
exists in your 64-Bit environment. Maybe the file is defect.

fp


-- 
Fredy Paquet 
OPAG Informatik AG
Fabrikmattenweg 11
CH-4144 Arlesheim 
Tel. 0041 61 7169222 
Fax. 0041 61 7169229 
http://www.opag.ch 


Am 14. Dezember 2016 13:43, schrieb oliver:



  _____  

----------------------------------------------------------------------------
-- 
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot


  _____  

_______________________________________________ 
Scigraphica-gtkextra mailing list 
Sci...@li... 
https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra 

[gtkextra] GtkExtra wont compile to DLL on MingW64 WinXP64 or Win7/64

[oliver <dr...@th...>]

We have been playing around with Gtk/GTKExtra on WinXP64 and Win764, under
Mingw64, mostly using the 32-bit compilers.
 
We create our own entire MingW infrastructure from scratch (i.e. build
everything from scratch) following a process much like that suggested here
(http://ingar.satgnu.net/devenv/mingw32/base.html).
 
We have compiled the GTKExtra package many times, as we make various
adjustments to the source to suit our needs.  The compile to DLL's has
always worked  (and also with Glade integration when required) with 32bit
GCC
 
 
Recently, we wished to compile GTKExtra with the 64bit GCC package, but it
always fails with errors like:
 
 
............
gtkplotgdk.lo gtkplotpc.lo gtkplotpixmap.lo gtkplotpolar.lo gtkplotprint.lo
gtkplotps.lo gtkplotsegment.lo gtkplotsurface.lo gtkpsfont.lo gtksheet.lo
gtksheetcolumn.lo gtktogglecombo.lo gtkextra-marshal.lo
gtkextratypebuiltins.lo   -lm 
libtool: link: rm -fr  .libs/libgtkextra-win32-3.0.a
.libs/libgtkextra-win32-3.0.la .libs/libgtkextra-win32-3.0.lai
 
*** Warning: linker path does not have real file for library -lcomdlg32.
*** I have the capability to make that library automatically link in when
*** you link to this library.  But I can only do this if you have a
*** shared version of the library, which you do not appear to have
*** because I did check the linker path looking for a file starting
*** with libcomdlg32 and none of the candidates passed a file format test
*** using a file magic. Last file checked:
C:/Apps/MinGW/mingw64/bin/../lib/gcc/x86_64-w64-mingw32/5.4.0/../../../../x8
6_64-w64-mingw32/lib//libcomdlg32.a
............
 
Once these start to print, it is a certainty that the GtkExtra DLL will not
be created, and the build will exit with Error (dll not found, etc during
install)
 
 
............
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/build64/gtkextra-3.3.0'
make: *** [all] Error 2
............
 
 
With the 32bit builds, all that is required is ./configure --prefix ... (and
possible enable glade), and it always works (i.e. creates the GtkExtra DLL)
 
With the 64 bit builds, we have tried every permutation we could think of,
such as specify the "host=" and "build=" options, as well as "enable =
shared" "disable = static " etc etc  for example
./configure --build=x86_64-w64-mingw32 --prefix=${LOCALDESTDIR}
--disable-static
 
... but no joy, it insists on building static, and apparently it "chokes"
primarily on the Windows API libs such as lcomdlg32.  Though, we know with
certainty both the 32bit and 64bit ComDlg32.DLL's (etc) are on the path (and
it does see those with with the 32 bit compile).
 
... we also know with certainty the that all other aspects of the 64bit
mingw build/install is working correctly since, for example, it correctly
creates the 64bit dll's for GLib, Gtk and Gdk (and Pango, Cairo, etc etc)
when we build those from scratch
 
We have also tested everything with permutations of GCC 5.2.0 - 6.2.0, Gtk
2.2.24.28 - 2.24.31 (the later of which requires a much more extensive Mingw
infrastructure, and also with and and without various patches that are not
obvious as to their usefulness, but just in case)
 
... we tend to use the sjlj GCC variant for the 32bit work, and the SEH GCC
variant for the 64 bit work.
 
 
 
The only package we can't build in (shared) 64 bit mode is the GTKExtra DLL.
 
Any assistance would be greatly appreciated.
 
 
Cheers
 
DrO (Dr Oliver Bajor)
 
 
PS a):  Since around ver 3.1.5, the GtkExtra package appears to be missing
the file glade-gtksheet-editor.h, which is required if the "enable glade"
option is desired (we just copied the file from an older back up)
 
 
PS b):  we have run into a couple of other Gtk/GTKExtra problems that we as
have posted on StackOverflow, just in case any body might have some thoughts
on those as well.
 
1)
http://stackoverflow.com/questions/40755870/win-os-clipboard-targets-vs-gtkc
lipboard-targets
 
2)
http://stackoverflow.com/questions/40730454/gtkclipboard-gdk-property-delete
-targets-crash-excel-only-windows
 
 

Re: [gtkextra] GTKExtra Help

[Shiva R. [GMAIL] <shi...@gm...>]

Hi Oliver,

perhaps you are looking for gtk_sheet_range_set_editable() ?

When a cell is marked not editable, the entry widget (with blinking 
cursor) is not displayed in the cell when you click on it.

The text is however still automatically selected and you get a cursor to 
highlight the portion you want for copy/paste, but you do not get an 
entry widget that allows you to edit the cell.

Rgds,

Shiva


oliver wrote:
> Dear Sirs
> I have been trying everywhere to obtain a response to what would seem 
> like an otherwise simple GTKExtra question, but it seems very 
> difficult to communicate with anyone.   I had eventually posted the 
> question also on StackOverflow, but no joy.
> I've tried to create a GTKExtra login account, but it is not completing.
> In any case, would any know if there is a way to create a cell 
> "without direct entry" in GTKSheet.  That is, when a cell is selected, 
> it should be selected ONLY (e.g the cursor should not enter the cell, 
> etc) ... a bit like selecting a cell in Excel, or a range in 
> GTKExtra/GTKSheet.  The idea is to use a secondary step to gain entry 
> to the cell (either directly into the cell, or into an edit box along 
> the to, as with Excel etc.).
> Please advise.
> DrO

[gtkextra] GTKExtra Help

[oliver <dr...@th...>]

Dear Sirs
 
I have been trying everywhere to obtain a response to what would seem like
an otherwise simple GTKExtra question, but it seems very difficult to
communicate with anyone.   I had eventually posted the question also on
StackOverflow, but no joy.
 
I've tried to create a GTKExtra login account, but it is not completing.
 
 
In any case, would any know if there is a way to create a cell "without
direct entry" in GTKSheet.  That is, when a cell is selected, it should be
selected ONLY (e.g the cursor should not enter the cell, etc) ... a bit like
selecting a cell in Excel, or a range in GTKExtra/GTKSheet.  The idea is to
use a secondary step to gain entry to the cell (either directly into the
cell, or into an edit box along the to, as with Excel etc.).
 
Please advise.
 
DrO
 
 

Re: [gtkextra] GtkSheet widget size seems bigger than necessary ?

[Shiva R. [GMAIL] <shi...@gm...>]

Thanks for the usual prompt response Fredy!

I took those 80 pixels of padding out in my version of the library and 
it looks much better.

I'm still struggling a bit to get the sheet to come up without any 
scrollbars automatically when its small enough but I think the problem 
is not in the library anymore, but in my code.

Rgds,

Shiva


Fredy Paquet wrote:
> Hello Shiva
>
> Look for the calculation of the variable "gint upper" in
> _gtk_sheet_scrollbar_adjust() within gtksheet.c
>
> We had to add an offset because something went wrong with
> scrolling, changing column width or something else.
> I do not know anymore.
>
> fp
>
>
> On Tue, 2016-05-10 at 17:33 +0200, Shiva Ramabadran [GMAIL] wrote:
>> Hello,
>>
>> I'm using gtksheet from gtkextra 3.1.5 and creating my sheet inside a
>> GtkScrolledWindow as suggested by all examples and the sample/test
>> code in the library.
>>
>> I see that there is always a padding of blank space to the
>> right/bottom of the window, that I can't seem to eliminate.
>>
>>
>> I've tried changing row/col label visibility, setting the width/height
>> to 0, and also the show/hide functions, but that space not to be
>> allocated to anything, but still requested from the scrolledwindow.
>>
>> Is there a way to eliminate it, so that the sheet fits snugly in the
>> scrolled window ?
>>
>> If someone can explain to me where to look in the library, I am happy
>> to make a change to the library myself.
>>
>> Many thanks in advance!
>>
>> Rgds,
>>
>> Shiva
>>
>>
>> ------------------------------------------------------------------------------
>> Mobile security can be enabling, not merely restricting. Employees who
>> bring their own devices (BYOD) to work are irked by the imposition of MDM
>> restrictions. Mobile Device Manager Plus allows you to control only the
>> apps on BYO-devices by containerizing them, leaving personal data untouched!
>> https://ad.doubleclick.net/ddm/clk/304595813;131938128;j
>> _______________________________________________ Scigraphica-gtkextra mailing list Sci...@li... https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra
>

[gtkextra] GtkSheet widget size seems bigger than necessary ?

[Shiva R. [GMAIL] <shi...@gm...>]

Hello,

I'm using gtksheet from gtkextra 3.1.5 and creating my sheet inside a 
GtkScrolledWindow as suggested by all examples and the sample/test code 
in the library.

I see that there is always a padding of blank space to the right/bottom 
of the window, that I can't seem to eliminate.


I've tried changing row/col label visibility, setting the width/height 
to 0, and also the show/hide functions, but that space not to be 
allocated to anything, but still requested from the scrolledwindow.

Is there a way to eliminate it, so that the sheet fits snugly in the 
scrolled window ?

If someone can explain to me where to look in the library, I am happy to 
make a change to the library myself.

Many thanks in advance!

Rgds,

Shiva

Re: [gtkextra] Cell spanning/merging in GtkSheet

[Shiva R. [GMAIL] <shi...@gm...>]

Hi Fredy,

Thanks for the prompt answer.

What's the best way to simulate it visually (assuming I code the logic 
for tracking the spanning in my code) ?

Is it at all even possible ?

Can I do something with setting the width of the GtkEntry that is used, 
and setting border widths on the appropriate range to 0 ?

Is there any other option for sheet widgets in GTK2 that you would 
consider reccomending if this is a required feature ?

Rgds,

Shiva


Fredy Paquet wrote:
> Hello Shiva
>
> No, cell-spanning or merging is not implemented in GtkSheet.
>
> fp
>

[gtkextra] Cell spanning/merging in GtkSheet

[Shiva R. [GMAIL] <shi...@gm...>]

Hello ?

Is it possible to implement cell spanning or merging in GtkSheet ?

Many thanks in advance,

Shiva

Re: [gtkextra] question regarding downloading deb package.

[tsuyoshi o. <cop...@ho...>]

Dear Tom,

I see!
Thank you for your quick reply.

tsuyoshi

On 2014年08月12日 20:57, Tom Schoonjans wrote:
> Hi Tsuyoshi,
>
>
> It looks that you are running a 32-bit version of Debian Wheezy. Unfortunately we provide only 64-bit packages, so you will have to compile gtkextra from source.
>
> Best regards,
>
> Tom
>
>
>
> Op 12-aug.-2014, om 14:37 heeft tsuyoshi okita <cop...@ho...> het volgende geschreven:
>
>> Dear gurus,
>>
>> I am a Debian wheezy user.
>> I followed site instruction to download deb package for gtkextra3 and
>> tried "sudo apt-get update" and it gave me a following error:
>> It is in Japanese... what it says is that it could not find a pubkey so
>> failed to download packages.
>> #########################################
>> HIT http://lvserver.ugent.be wheezy/stable Sources
>> ERROR http://lvserver.ugent.be wheezy/stable i386 Packages
>> 404 Not Found
>> IGNORED http://lvserver.ugent.be wheezy/stable Translation-ja_JP
>> IGNORED http://lvserver.ugent.be wheezy/stable Translation-ja
>> IGNORED http://lvserver.ugent.be wheezy/stable Translation-en
>> 198 B を 15秒 で取得しました (12 B/s)
>> W: GPG Error: http://lvserver.ugent.be wheezy Release: 公開鍵を利用でき
>> ないため、以下の署名は検証できませんでした: NO_PUBKEY 1CA7FDC8856B2D18
>> W:
>> http://lvserver.ugent.be/apt/debian/dists/wheezy/stable/binary-i386/Packages
>> の取得に失敗しました 404 Not Found
>>
>> E: いくつかのインデックスファイルのダウンロードに失敗しました。これらは
>> 無視されるか、古いものが代わりに使われます。
>> # it says "failed to download some index files."
>> #########################################
>>
>> Any idea??
>>
>> Thank you for your help.
>>
>> Tsuyoshi
>>
>>
>>
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> Scigraphica-gtkextra mailing list
>> Sci...@li...
>> https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra

Re: [gtkextra] question regarding downloading deb package.

[Tom S. <tom...@me...>]

Hi Tsuyoshi,


It looks that you are running a 32-bit version of Debian Wheezy. Unfortunately we provide only 64-bit packages, so you will have to compile gtkextra from source.

Best regards,

Tom



Op 12-aug.-2014, om 14:37 heeft tsuyoshi okita <cop...@ho...> het volgende geschreven:

> Dear gurus,
> 
> I am a Debian wheezy user.
> I followed site instruction to download deb package for gtkextra3 and 
> tried "sudo apt-get update" and it gave me a following error:
> It is in Japanese... what it says is that it could not find a pubkey so 
> failed to download packages.
> #########################################
> HIT http://lvserver.ugent.be wheezy/stable Sources
> ERROR http://lvserver.ugent.be wheezy/stable i386 Packages
> 404 Not Found
> IGNORED http://lvserver.ugent.be wheezy/stable Translation-ja_JP
> IGNORED http://lvserver.ugent.be wheezy/stable Translation-ja
> IGNORED http://lvserver.ugent.be wheezy/stable Translation-en
> 198 B を 15秒 で取得しました (12 B/s)
> W: GPG Error: http://lvserver.ugent.be wheezy Release: 公開鍵を利用でき 
> ないため、以下の署名は検証できませんでした: NO_PUBKEY 1CA7FDC8856B2D18
> W: 
> http://lvserver.ugent.be/apt/debian/dists/wheezy/stable/binary-i386/Packages 
> の取得に失敗しました 404 Not Found
> 
> E: いくつかのインデックスファイルのダウンロードに失敗しました。これらは 
> 無視されるか、古いものが代わりに使われます。
> # it says "failed to download some index files."
> #########################################
> 
> Any idea??
> 
> Thank you for your help.
> 
> Tsuyoshi
> 
> 
> 
> ------------------------------------------------------------------------------
> _______________________________________________
> Scigraphica-gtkextra mailing list
> Sci...@li...
> https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra

[gtkextra] question regarding downloading deb package.

[tsuyoshi o. <cop...@ho...>]

Dear gurus,

I am a Debian wheezy user.
I followed site instruction to download deb package for gtkextra3 and 
tried "sudo apt-get update" and it gave me a following error:
It is in Japanese... what it says is that it could not find a pubkey so 
failed to download packages.
#########################################
HIT http://lvserver.ugent.be wheezy/stable Sources
ERROR http://lvserver.ugent.be wheezy/stable i386 Packages
404 Not Found
IGNORED http://lvserver.ugent.be wheezy/stable Translation-ja_JP
IGNORED http://lvserver.ugent.be wheezy/stable Translation-ja
IGNORED http://lvserver.ugent.be wheezy/stable Translation-en
198 B を 15秒 で取得しました (12 B/s)
W: GPG Error: http://lvserver.ugent.be wheezy Release: 公開鍵を利用でき 
ないため、以下の署名は検証できませんでした: NO_PUBKEY 1CA7FDC8856B2D18
W: 
http://lvserver.ugent.be/apt/debian/dists/wheezy/stable/binary-i386/Packages 
の取得に失敗しました 404 Not Found

E: いくつかのインデックスファイルのダウンロードに失敗しました。これらは 
無視されるか、古いものが代わりに使われます。
# it says "failed to download some index files."
#########################################

Any idea??

Thank you for your help.

Tsuyoshi

[gtkextra] Change cursor to watch/wait

[Thomas R. <tr...@ky...>]

Hi,

When building a large gtk-sheet, it would be nice to have a watch for 
cursor :-)

How do I make the cursor remain the same in a gtk-sheet. ?

On the root window, I can change the cursor to a watch, but when I move 
the mouse over a gtk-sheet, it changes back to a pointer or a plus.

Is there a gtk-sheet call to change the cursor instead ?

I use v. 3.0.5 of GtkExtra.



Regards

Thomas Rønshof

Re: [gtkextra] GTK3 Support?

[Arne P. <ar...@pa...>]

On 23.06.2014 08:11, Fredy Paquet wrote:
> Hello Arne
> 
> The GtkExtra-3 ist not yet ready for Gtk3, but we're working on it.
> 
> Fredy
> 

Hi Fredy,

thanks for the Information.
Sounds good.

Well I had a look to the source and actually I have no clue where I even could start.
I tried compiling from the just the files I need for 2D plotting, but especially all the PS Font
stuff I have no Idea about.

I would like to offer some valuable support, but my knowledge is limited, I am more focused on
embedded programming.

However, if you feel that there is an not so complicated task where an lets say interested Gtk
beginner can work on, please let me now.

regards
  Arne

Re: [gtkextra] GTK3 Support?

[<rr...@ih...>]

 

----- Original Message -----
From: ar...@pa...
To:
Cc:
Sent:Sun, 22 Jun 2014 22:38:05 +0200
Subject:[gtkextra] GTK3 Support?

Arne,

GtkExtra has split into two branches, gtkextra-2 and gtketra-3. 
gtkextra-2 is being maintained  by myself  with major bug fixes but
not being developed.
gtkextra-3 is being actively developed by fpaquet to remove obsoleted
calls and move it to preferred gtk features. When I last looked, some
time ago, it would not compile under gtk3, however much development
has been done on it since then. Perhaps fpaquet can further explain.

Regards,
Roy Rankin

    
 Dear all,

 I have seen that there is some activity in GtkExtra, and there was
also a branch for GTK3.

 Is GtkExtra now compatible with Gtk3 or is there any progress in this
direction?

 I tried to compile with in an Gtk3 Environment, but it seems that
there are still a lot of
 deprecated symbols in the sources.

 regards
 Arne

 ------------------------------------------------------------------------------
 HPCC Systems Open Source Big Data Platform from LexisNexis Risk
Solutions
 Find What Matters Most in Your Big Data with HPCC Systems
 Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
 Leverages Graph Analysis for Fast Processing & Easy Data Exploration
 http://p.sf.net/sfu/hpccsystems
 _______________________________________________
 Scigraphica-gtkextra mailing list
 Sci...@li...
 https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra

[gtkextra] GTK3 Support?

[Arne P. <ar...@pa...>]

Dear all,

I have seen that there is some activity in GtkExtra, and there was also a branch for GTK3.

Is GtkExtra now compatible with Gtk3 or is there any progress in this direction?

I tried to compile with in an Gtk3 Environment, but it seems that there are still a lot of
deprecated symbols in the sources.

regards
  Arne

[gtkextra] Adding xy cursor functionality

[Arne P. <ar...@pa...>]

Dear all,

I am using gtk-plot for a oscilloscope like program, where I show some graphs with sampled data.

http://www.pagelnet.de/uctools/a00009.html

Now I want to add a courser functionality, means:

I want to have two cross-hair like cursors, which have to be attached to one (or two) of my graphs.
When a cursor is selected it should follow the mouse movements in X direction. The best would be if
the center of the cross would stick to the selected graph, even the mouse makes a deviation in Y
direction.

My first idea was to use markers, and base on this, but it seems that makers are not working when my
plots are generatete with a custom function (gtk_plot_add_function).
Maybe there is a way to indicate datapoints manualy in my callback function.

any suggestion out there to help me in this matter?

regards
  Arne

[gtkextra] get check box in sheet

[Dwiki P. <dwi...@ya...>]

hello, 
ive got sheet with a cell contain check box, every time user check or uncheck check box, ive got to set some value in other variable,
ive try this on linux

check : Gtk.Check_Button.Gtk_Check_Button;


check:=Gtk.Check_Button.Gtk_Check_Button(Gtk.Extra.Sheet.Get_Widget(Gtk.Extra.Sheet.Get_Child_At(Sheet => sheet,Row   => row,Col   => col)));


active:=Gtk.Check_Button.Get_Active(check);


if active then

ticked, do something
else
not ticked, do something
end


but, when im trying in windows, it work only when i thick first row, but failed on other row. it say 
raised PROGRAM_ERROR : EXCEPTION_ACCESS_VIOLATION


is there any other way to get status of check box??

thank you

[gtkextra] bind gtkada and gtkextra in windows XP

[Dwiki P. <dwi...@ya...>]

Hello,
hello, 
if anyone has ever bind gtkextra to gtkada in windows? how? 
ive been search in google but did'nt find the appropriate article yet, 

thank you 

Re: [gtkextra] install gtkextra in windows

[Dwiki P. <dwi...@ya...>]

ups sory, i mean "/usr/include/gtk-2.0/"
i already installed gtk through cygwin, and i already run make clean, re-./configure, and execute make command, but it still show the same error "message gtkbordercombo.c:35:21: fatal error: gtk/gtk.h: No such file or directory"

any clue??

________________________________
 From: Tom Schoonjans <tom...@me...>
To: Dwiki Putrandityo <dwi...@ya...> 
Cc: Fredy Paquet <fr...@op...>; "sci...@li..." <sci...@li...> 
Sent: Wednesday, August 14, 2013 12:31 PM
Subject: Re: [gtkextra] install gtkextra in windows
 


Hello again,

This looks like there is a problem with the pkg-config file of gtk
After updating your cygwin packages, did you run configure again? Also run 'make clean' after running configure and before running 'make'

The folder you says contains gtk/gtk.h looks suspicious since it doesn't seem to be integrated within the cygwin system directory hierarchy. Did you copy it there yourself? Or did you install it through cygwin?

Tom


On Aug 14, 2013, at 10:33 AM, Dwiki Putrandityo <dwi...@ya...> wrote:

Dear Tom,
>
>
>i do apologize for the inconvenience as a newbie programmer, 
>
>
>I think its all my mistake, i updated my cygwin, pick all devel package and the "make[2]: Entering directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
>-3.0.la', needed by `all-am'.  Stop.`libgtkextra-win32 "is gone, but still ive got another error after executing "make" command :(
>"gtkbordercombo.c:35:21: fatal error: gtk/gtk.h: No such file or directory"
>
>
>
>ive set PATH to "/cygdrive/c/opt/gtk/include/gtk-2.0" 
>which contain folder gtk/gtk.h
>
>
>am i doing something wrong again??
>
>
>
>________________________________
> From: Tom Schoonjans <tom...@me...>
>To: Dwiki Putrandityo <dwi...@ya...> 
>Cc: Fredy Paquet <fr...@op...> 
>Sent: Wednesday, August 14, 2013 10:12 AM
>Subject: Re: [gtkextra] install gtkextra in windows
> 
>
>
>Hello,
>
>
>
>
>Interesting. This looks like a bug in the build system that should be addressed in an update.
>Can you verify if this also occurs with 2.1.2?
>
>
>Fredy, can you confirm this problem? I am currently on holidays and don't have access to my development systems.
>I am thinking that we should also test on cygwin before making releases. 
>
>
>Dwiki, we know that gtkextra-3 works on windows with mingw. You may want to check this compiler out, as it has several advantages over using cygwin, but you'll have to kick out (some) POSIX calls from your code.
>
>
>Best,
>
>
>Tom 
>
>
>On Aug 14, 2013, at 7:39 AM, Dwiki Putrandityo <dwi...@ya...> wrote:
>
>thanks tom,
>>now i can do "./configure" command, but when i execute "make" command it say
>>
>>
>>$ make
>>make  all-recursive
>>make[1]: Entering directory `/cygdrive/c/gtkextra-3.0.5'
>>Making all in gtkextra
>>make[2]: Entering directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
>>-3.0.la', needed by `all-am'.  Stop.`libgtkextra-win32
>>make[2]: Leaving directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
>>Makefile:416: recipe for target `all-recursive' failed
>>make[1]: *** [all-recursive] Error 1
>>make[1]: Leaving directory `/cygdrive/c/gtkextra-3.0.5'
>>Makefile:321: recipe for target `all' failed
>>make: *** [all] Error 2
>>
>>
>>
>>
>>any clue?
>>
>>
>>thank you
>>
>>________________________________
>> From: Tom Schoonjans <tom...@me...>
>>To: Dwiki Putrandityo <dwi...@ya...> 
>>Cc: "sci...@li..." <sci...@li...> 
>>Sent: Tuesday, August 13, 2013 12:54 PM
>>Subject: Re: [gtkextra] install gtkextra in windows
>> 
>>
>>
>>Hello,
>>
>>
>>This error message says that you need to install pkg-config or, if it's already installed, to add it to you PATH environment variable.
>>
>>
>>If you already installed gtk-2.0, then pkg-config should already be available though: in that case it's definitely a path problem.
>>
>>
>>This being said: it is strongly recommended that you use the gtkextra 3 release series for your program. It is fully functional on Windows XP.
>>
>>
>>Take care,
>>
>>
>>Tom
>>
>>
>>
>>
>>
>>
>>On Aug 13, 2013, at 8:42 AM, Dwiki Putrandityo <dwi...@ya...> wrote:
>>
>>hello, im going to using gtkada + gtkextra to build my application in windows xp,
>>>im succesfully install gtkada in windows xp, but ive got litle bit trouble to install gtkextra, 
>>>here my step, 
>>>i download gtk+extra-2.1.2.tar.gz and gtk+extra-2.1.2-dev.zip. 
>>>im using Cygwin to "./configure" the source from gtk+extra-2.1.2.tar.gz, but it show me error message 
>>>
>>>
>>>"configure: error: The pkg-config script could not be found or is too old.  Make sure it
>>>is in your PATH or set the PKG_CONFIG environment variable to the full
>>>path to pkg-config."
>>>
>>>
>>>can anyone tell me what should i do then?
>>>
>>>
>>>thank you------------------------------------------------------------------------------
>>>Get 100% visibility into
 Java/.NET code with AppDynamics Lite!
>>>It's a free troubleshooting tool designed for production.
>>>Get down to code-level detail for bottlenecks, with <2% overhead. 
>>>Download for free and get started troubleshooting in minutes. 
>>>http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk_______________________________________________
>>>Scigraphica-gtkextra mailing list
>>>Sci...@li...
>>>https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra
>>>
>>
>>
>>------------------------------------------------------------------------------
>>Get 100% visibility into Java/.NET code with AppDynamics Lite!
>>It's a free troubleshooting tool designed for production.
>>Get
 down to code-level detail for bottlenecks, with <2% overhead. 
>>Download for free and get started troubleshooting in minutes. 
>>http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk_______________________________________________
>>Scigraphica-gtkextra mailing list
>>Sci...@li...
>>https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra
>>
>
>
>

[gtkextra] unsubscribe

[Torben S. <ts...@ca...>]

Med venlig hilsen 
Torben Sørensen 
Adm.dir. 
Casalogic A/S 
T (+45) 70 20 10 63 
M (+45) 22 97 99 59 

Vidste du at Casalogic's webshop har mere end 20.000 produkter online?, kig forbi idag... 

Re: [gtkextra] install gtkextra in windows

[Tom S. <tom...@me...>]

Hello again,

This looks like there is a problem with the pkg-config file of gtk
After updating your cygwin packages, did you run configure again? Also run 'make clean' after running configure and before running 'make'

The folder you says contains gtk/gtk.h looks suspicious since it doesn't seem to be integrated within the cygwin system directory hierarchy. Did you copy it there yourself? Or did you install it through cygwin?

Tom

On Aug 14, 2013, at 10:33 AM, Dwiki Putrandityo <dwi...@ya...> wrote:

> Dear Tom,
> 
> i do apologize for the inconvenience as a newbie programmer, 
> 
> I think its all my mistake, i updated my cygwin, pick all devel package and the "make[2]: Entering directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
>> -3.0.la', needed by `all-am'.  Stop.`libgtkextra-win32 "is gone, but still ive got another error after executing "make" command :(
> "gtkbordercombo.c:35:21: fatal error: gtk/gtk.h: No such file or directory"
> 
> ive set PATH to "/cygdrive/c/opt/gtk/include/gtk-2.0" 
> which contain folder gtk/gtk.h
> 
> am i doing something wrong again??
> 
> From: Tom Schoonjans <tom...@me...>
> To: Dwiki Putrandityo <dwi...@ya...> 
> Cc: Fredy Paquet <fr...@op...> 
> Sent: Wednesday, August 14, 2013 10:12 AM
> Subject: Re: [gtkextra] install gtkextra in windows
> 
> Hello,
> 
> 
> Interesting. This looks like a bug in the build system that should be addressed in an update.
> Can you verify if this also occurs with 2.1.2?
> 
> Fredy, can you confirm this problem? I am currently on holidays and don't have access to my development systems.
> I am thinking that we should also test on cygwin before making releases. 
> 
> Dwiki, we know that gtkextra-3 works on windows with mingw. You may want to check this compiler out, as it has several advantages over using cygwin, but you'll have to kick out (some) POSIX calls from your code.
> 
> Best,
> 
> Tom 
> 
> On Aug 14, 2013, at 7:39 AM, Dwiki Putrandityo <dwi...@ya...> wrote:
> 
>> thanks tom,
>> now i can do "./configure" command, but when i execute "make" command it say
>> 
>> $ make
>> make  all-recursive
>> make[1]: Entering directory `/cygdrive/c/gtkextra-3.0.5'
>> Making all in gtkextra
>> make[2]: Entering directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
>> -3.0.la', needed by `all-am'.  Stop.`libgtkextra-win32
>> make[2]: Leaving directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
>> Makefile:416: recipe for target `all-recursive' failed
>> make[1]: *** [all-recursive] Error 1
>> make[1]: Leaving directory `/cygdrive/c/gtkextra-3.0.5'
>> Makefile:321: recipe for target `all' failed
>> make: *** [all] Error 2
>> 
>> 
>> any clue?
>> 
>> thank you
>> From: Tom Schoonjans <tom...@me...>
>> To: Dwiki Putrandityo <dwi...@ya...> 
>> Cc: "sci...@li..." <sci...@li...> 
>> Sent: Tuesday, August 13, 2013 12:54 PM
>> Subject: Re: [gtkextra] install gtkextra in windows
>> 
>> Hello,
>> 
>> This error message says that you need to install pkg-config or, if it's already installed, to add it to you PATH environment variable.
>> 
>> If you already installed gtk-2.0, then pkg-config should already be available though: in that case it's definitely a path problem.
>> 
>> This being said: it is strongly recommended that you use the gtkextra 3 release series for your program. It is fully functional on Windows XP.
>> 
>> Take care,
>> 
>> Tom
>> 
>> 
>> 
>> On Aug 13, 2013, at 8:42 AM, Dwiki Putrandityo <dwi...@ya...> wrote:
>> 
>>> hello, im going to using gtkada + gtkextra to build my application in windows xp,
>>> im succesfully install gtkada in windows xp, but ive got litle bit trouble to install gtkextra, 
>>> here my step, 
>>> i download gtk+extra-2.1.2.tar.gz and gtk+extra-2.1.2-dev.zip. 
>>> im using Cygwin to "./configure" the source from gtk+extra-2.1.2.tar.gz, but it show me error message 
>>> 
>>> "configure: error: The pkg-config script could not be found or is too old.  Make sure it
>>> is in your PATH or set the PKG_CONFIG environment variable to the full
>>> path to pkg-config."
>>> 
>>> can anyone tell me what should i do then?
>>> 
>>> thank you
>>> ------------------------------------------------------------------------------
>>> Get 100% visibility into Java/.NET code with AppDynamics Lite!
>>> It's a free troubleshooting tool designed for production.
>>> Get down to code-level detail for bottlenecks, with <2% overhead. 
>>> Download for free and get started troubleshooting in minutes. 
>>> http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk_______________________________________________
>>> Scigraphica-gtkextra mailing list
>>> Sci...@li...
>>> https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra
>> 
>> 
>> 
>> ------------------------------------------------------------------------------
>> Get 100% visibility into Java/.NET code with AppDynamics Lite!
>> It's a free troubleshooting tool designed for production.
>> Get down to code-level detail for bottlenecks, with <2% overhead. 
>> Download for free and get started troubleshooting in minutes. 
>> http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk_______________________________________________
>> Scigraphica-gtkextra mailing list
>> Sci...@li...
>> https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra
> 
> 
> 

Re: [gtkextra] install gtkextra in windows

[Dwiki P. <dwi...@ya...>]

Dear Tom,

i do apologize for the inconvenience as a newbie programmer, 

I think its all my mistake, i updated my cygwin, pick all devel package and the "make[2]: Entering directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
-3.0.la', needed by `all-am'.  Stop.`libgtkextra-win32 "is gone, but still ive got another error after executing "make" command :(
"gtkbordercombo.c:35:21: fatal error: gtk/gtk.h: No such file or directory"


ive set PATH to "/cygdrive/c/opt/gtk/include/gtk-2.0" 
which contain folder gtk/gtk.h

am i doing something wrong again??


________________________________
 From: Tom Schoonjans <tom...@me...>
To: Dwiki Putrandityo <dwi...@ya...> 
Cc: Fredy Paquet <fr...@op...> 
Sent: Wednesday, August 14, 2013 10:12 AM
Subject: Re: [gtkextra] install gtkextra in windows
 


Hello,


Interesting. This looks like a bug in the build system that should be addressed in an update.
Can you verify if this also occurs with 2.1.2?

Fredy, can you confirm this problem? I am currently on holidays and don't have access to my development systems.
I am thinking that we should also test on cygwin before making releases. 

Dwiki, we know that gtkextra-3 works on windows with mingw. You may want to check this compiler out, as it has several advantages over using cygwin, but you'll have to kick out (some) POSIX calls from your code.

Best,

Tom 


On Aug 14, 2013, at 7:39 AM, Dwiki Putrandityo <dwi...@ya...> wrote:

thanks tom,
>now i can do "./configure" command, but when i execute "make" command it say
>
>
>$ make
>make  all-recursive
>make[1]: Entering directory `/cygdrive/c/gtkextra-3.0.5'
>Making all in gtkextra
>make[2]: Entering directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
>-3.0.la', needed by `all-am'.  Stop.`libgtkextra-win32
>make[2]: Leaving directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
>Makefile:416: recipe for target `all-recursive' failed
>make[1]: *** [all-recursive] Error 1
>make[1]: Leaving directory `/cygdrive/c/gtkextra-3.0.5'
>Makefile:321: recipe for target `all' failed
>make: *** [all] Error 2
>
>
>
>
>any clue?
>
>
>thank you
>
>________________________________
> From: Tom Schoonjans <tom...@me...>
>To: Dwiki Putrandityo <dwi...@ya...> 
>Cc: "sci...@li..." <sci...@li...> 
>Sent: Tuesday, August 13, 2013 12:54 PM
>Subject: Re: [gtkextra] install gtkextra in windows
> 
>
>
>Hello,
>
>
>This error message says that you need to install pkg-config or, if it's already installed, to add it to you PATH environment variable.
>
>
>If you already installed gtk-2.0, then pkg-config should already be available though: in that case it's definitely a path problem.
>
>
>This being said: it is strongly recommended that you use the gtkextra 3 release series for your program. It is fully functional on Windows XP.
>
>
>Take care,
>
>
>Tom
>
>
>
>
>
>
>On Aug 13, 2013, at 8:42 AM, Dwiki Putrandityo <dwi...@ya...> wrote:
>
>hello, im going to using gtkada + gtkextra to build my application in windows xp,
>>im succesfully install gtkada in windows xp, but ive got litle bit trouble to install gtkextra, 
>>here my step, 
>>i download gtk+extra-2.1.2.tar.gz and gtk+extra-2.1.2-dev.zip. 
>>im using Cygwin to "./configure" the source from gtk+extra-2.1.2.tar.gz, but it show me error message 
>>
>>
>>"configure: error: The pkg-config script could not be found or is too old.  Make sure it
>>is in your PATH or set the PKG_CONFIG environment variable to the full
>>path to pkg-config."
>>
>>
>>can anyone tell me what should i do then?
>>
>>
>>thank you------------------------------------------------------------------------------
>>Get 100% visibility into
 Java/.NET code with AppDynamics Lite!
>>It's a free troubleshooting tool designed for production.
>>Get down to code-level detail for bottlenecks, with <2% overhead. 
>>Download for free and get started troubleshooting in minutes. 
>>http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk_______________________________________________
>>Scigraphica-gtkextra mailing list
>>Sci...@li...
>>https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra
>>
>
>
>------------------------------------------------------------------------------
>Get 100% visibility into Java/.NET code with AppDynamics Lite!
>It's a free troubleshooting tool designed for production.
>Get down to code-level detail for bottlenecks, with <2% overhead. 
>Download for free and get started troubleshooting in minutes. 
>http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk_______________________________________________
>Scigraphica-gtkextra mailing list
>Sci...@li...
>https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra
>

Re: [gtkextra] install gtkextra in windows

[Dwiki P. <dwi...@ya...>]

thanks tom,
now i can do "./configure" command, but when i execute "make" command it say

$ make
make  all-recursive
make[1]: Entering directory `/cygdrive/c/gtkextra-3.0.5'
Making all in gtkextra
make[2]: Entering directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
-3.0.la', needed by `all-am'.  Stop.`libgtkextra-win32
make[2]: Leaving directory `/cygdrive/c/gtkextra-3.0.5/gtkextra'
Makefile:416: recipe for target `all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/cygdrive/c/gtkextra-3.0.5'
Makefile:321: recipe for target `all' failed
make: *** [all] Error 2


any clue?

thank you

________________________________
 From: Tom Schoonjans <tom...@me...>
To: Dwiki Putrandityo <dwi...@ya...> 
Cc: "sci...@li..." <sci...@li...> 
Sent: Tuesday, August 13, 2013 12:54 PM
Subject: Re: [gtkextra] install gtkextra in windows
 


Hello,

This error message says that you need to install pkg-config or, if it's already installed, to add it to you PATH environment variable.

If you already installed gtk-2.0, then pkg-config should already be available though: in that case it's definitely a path problem.

This being said: it is strongly recommended that you use the gtkextra 3 release series for your program. It is fully functional on Windows XP.

Take care,

Tom




On Aug 13, 2013, at 8:42 AM, Dwiki Putrandityo <dwi...@ya...> wrote:

hello, im going to using gtkada + gtkextra to build my application in windows xp,
>im succesfully install gtkada in windows xp, but ive got litle bit trouble to install gtkextra, 
>here my step, 
>i download gtk+extra-2.1.2.tar.gz and gtk+extra-2.1.2-dev.zip. 
>im using Cygwin to "./configure" the source from gtk+extra-2.1.2.tar.gz, but it show me error message 
>
>
>"configure: error: The pkg-config script could not be found or is too old.  Make sure it
>is in your PATH or set the PKG_CONFIG environment variable to the full
>path to pkg-config."
>
>
>can anyone tell me what should i do then?
>
>
>thank you------------------------------------------------------------------------------
>Get 100% visibility into Java/.NET code with AppDynamics Lite!
>It's a free troubleshooting tool designed for production.
>Get down to code-level detail for bottlenecks, with <2% overhead. 
>Download for free and get started troubleshooting in minutes. 
>http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk_______________________________________________
>Scigraphica-gtkextra mailing list
>Sci...@li...
>https://lists.sourceforge.net/lists/listinfo/scigraphica-gtkextra
>