;;;; stuff which is not specific to any particular build phase, but
;;;; used by most of them
;;;; Note: It's specifically not used when bootstrapping PCL, because
;;;; we do SAVE-LISP after that, and we don't want to save extraneous
;;;; bootstrapping machinery into the frozen image which will
;;;; subsequently be used as the mother of all Lisp sessions.
;;;; This software is part of the SBCL system. See the README file for
;;;; more information.
;;;; This software is derived from the CMU CL system, which was
;;;; written at Carnegie Mellon University and released into the
;;;; public domain. The software is in the public domain and is
;;;; provided with absolutely no warranty. See the COPYING and CREDITS
;;;; files for more information.
;;; SB-COLD holds stuff used to build the initial SBCL core file
;;; (including not only the final construction of the core file, but
;;; also the preliminary steps like e.g. building the cross-compiler
;;; and running the cross-compiler to produce target FASL files).
(defpackage "SB-COLD" (:use "CL"))
;;; prefixes for filename stems when cross-compiling. These are quite arbitrary
;;; (although of course they shouldn't collide with anything we don't want to
;;; write over). In particular, they can be either relative path names (e.g.
;;; "host-objects/" or absolute pathnames (e.g. "/tmp/sbcl-xc-host-objects/").
;;; The cross-compilation process will force the creation of these directories
;;; by executing CL:ENSURE-DIRECTORIES-EXIST (on the xc host Common Lisp).
;;; suffixes for filename stems when cross-compiling
;; On some xc hosts, it's impossible to LOAD a fasl file unless it
;; has the same extension that the host uses for COMPILE-FILE
;; output, so we have to be careful to use the xc host's preferred
;; FIXME: This is a little ugly and annoying to maintain. And
;; there's very likely some way to rearrange the build process so
;; that we never explicitly refer to host object file suffixes,
;; only to the result of CL:COMPILE-FILE-PATHNAME.
#+lispworks ".ufsl" ; as per Lieven Marchand sbcl-devel 2002-02-01
#+(and openmcl (not darwin)) ".pfsl"
#+(and openmcl darwin) ".dfsl"
;; On most xc hosts, any old extension works, so we use an
;; arbitrary one.
;; Target fasl files are LOADed (actually only quasi-LOADed, in
;; GENESIS) only by SBCL code, and it doesn't care about particular
;; extensions, so we can use something arbitrary.
;;; a function of one functional argument, which calls its functional argument
;;; in an environment suitable for compiling the target. (This environment
;;; includes e.g. a suitable *FEATURES* value.)
(declaim (type function *in-target-compilation-mode-fn*))
;;; a function with the same calling convention as CL:COMPILE-FILE, to be
;;; used to translate ordinary Lisp source files into target object files
(declaim (type function *target-compile-file*))
;;; designator for a function with the same calling convention as
;;; SB-C:ASSEMBLE-FILE, to be used to translate assembly files into target
;;; object files
;;;; some tools
;;; Take the file named X and make it into a file named Y. Sorta like
;;; UNIX, and unlike Common Lisp's bare RENAME-FILE, we don't allow
;;; information from the original filename to influence the final
;;; filename. (The reason that it's only sorta like UNIX is that in
;;; UNIX "mv foo bar/" will work, but the analogous
;;; (RENAME-FILE-A-LA-UNIX "foo" "bar/") should fail.)
;;; (This is a workaround for the weird behavior of Debian CMU CL
;;; 2.4.6, where (RENAME-FILE "dir/x" "dir/y") tries to create a file
;;; called "dir/dir/y". If that behavior goes away, then we should be
;;; able to get rid of this function and use plain RENAME-FILE in the
;;; COMPILE-STEM function above. -- WHN 19990321
(defun rename-file-a-la-unix (x y)
(let ((path ;; (Note that the TRUENAME expression here is lifted from an
;; example in the ANSI spec for TRUENAME.)
(with-open-file (stream y :direction :output)
;; From the ANSI spec: "In this case, the file is closed
;; when the truename is tried, so the truename
;; information is reliable."
(rename-file x path)))
;;; a wrapper for compilation/assembly, used mostly to centralize
;;; the procedure for finding full filenames from "stems"
;;; Compile the source file whose basic name is STEM, using some
;;; standard-for-the-SBCL-build-process procedures to generate the
;;; full pathnames of source file and object file. Return the pathname
;;; of the object file for STEM. Several &KEY arguments are accepted:
;;; :SRC-PREFIX, :SRC-SUFFIX =
;;; strings to be concatenated to STEM to produce source filename
;;; :OBJ-PREFIX, :OBJ-SUFFIX =
;;; strings to be concatenated to STEM to produce object filename
;;; :TMP-OBJ-SUFFIX-SUFFIX =
;;; string to be appended to the name of an object file to produce
;;; the name of a temporary object file
;;; :COMPILE-FILE, :IGNORE-FAILURE-P =
;;; :COMPILE-FILE is a function to use for compiling the file
;;; (with the same calling conventions as ANSI CL:COMPILE-FILE).
;;; If the third return value (FAILURE-P) of this function is
;;; true, a continuable error will be signalled, unless
;;; :IGNORE-FAILURE-P is set, in which case only a warning will be
(defun compile-stem (stem
(obj-suffix (error "missing OBJ-SUFFIX"))
(declare (type function compile-file))
(let* (;; KLUDGE: Note that this CONCATENATE 'STRING stuff is not The Common
;; Lisp Way, although it works just fine for common UNIX environments.
;; Should it come to pass that the system is ported to environments
;; where version numbers and so forth become an issue, it might become
;; urgent to rewrite this using the fancy Common Lisp PATHNAME
;; machinery instead of just using strings. In the absence of such a
;; port, it might or might be a good idea to do the rewrite.
;; -- WHN 19990815
(src (concatenate 'string src-prefix stem src-suffix))
(obj (concatenate 'string obj-prefix stem obj-suffix))
(tmp-obj (concatenate 'string obj tmp-obj-suffix-suffix)))
(ensure-directories-exist obj :verbose t)
;; We're about to set about building a new object file. First, we
;; delete any preexisting object file in order to avoid confusing
;; ourselves later should we happen to bail out of compilation
;; with an error.
(when (probe-file obj)
;; Original comment:
;; Work around a bug in CLISP 1999-01-08 #'COMPILE-FILE: CLISP
;; mangles relative pathnames passed as :OUTPUT-FILE arguments,
;; but works OK with absolute pathnames.
;; following discussion on cmucl-imp 2002-07
;; "COMPILE-FILE-PATHNAME", it would seem safer to deal with
;; absolute pathnames all the time; it is no longer clear that the
;; original behaviour in CLISP was wrong or that the current
;; behaviour is right; and in any case absolutifying the pathname
;; insulates us against changes of behaviour. -- CSR, 2002-08-09
;; (Note that this idiom is taken from the ANSI
;; documentation for TRUENAME.)
(with-open-file (stream tmp-obj :direction :output)
;; and some compilers (e.g. OpenMCL) will complain if they're
;; asked to write over a file that exists already (and isn't
;; recognizeably a fasl file), so
(when (probe-file tmp-obj)
;; Try to use the compiler to generate a new temporary object file.
(flet ((report-recompile-restart (stream)
(format stream "Recompile file ~S" src))
(format stream "Continue, using possibly bogus file ~S" obj)))
(multiple-value-bind (output-truename warnings-p failure-p)
(funcall compile-file src :output-file tmp-obj)
(declare (ignore warnings-p))
(cond ((not output-truename)
(error "couldn't compile ~S" src))
(warn "ignoring FAILURE-P return value from compilation of ~S"
(error "FAILURE-P was set when creating ~S."
(setf failure-p nil)))
;; Don't leave failed object files lying around.
(when (and failure-p (probe-file tmp-obj))
(format t "~&deleted ~S~%" tmp-obj)))))
;; Otherwise: success, just fall through.
;; If we get to here, compilation succeeded, so it's OK to rename
;; the temporary output file to the permanent object file.
(rename-file-a-la-unix tmp-obj obj)
;; nice friendly traditional return value
;;; other miscellaneous tools
;;; Try to minimize/conceal any non-standardness of the host Common Lisp.
;;;; special read-macros for building the cold system (and even for
;;;; building some of our tools for building the cold system)
;;; When cross-compiling, the *FEATURES* set for the target Lisp is
;;; not in general the same as the *FEATURES* set for the host Lisp.
;;; In order to refer to target features specifically, we refer to
;;; *SHEBANG-FEATURES* instead of *FEATURES*, and use the #!+ and #!-
;;; readmacros instead of the ordinary #+ and #- readmacros.
(append (read-from-file "base-target-features.lisp-expr")
(customizer (if (probe-file customizer-file-name)
(funcall customizer default-features)))
(let ((*print-length* nil)
"target features *SHEBANG-FEATURES*=~@<~S~:>~%"
(let* ((default-subfeatures nil)
(customizer (if (probe-file customizer-file-name)
(funcall customizer default-subfeatures)))
(let ((*print-length* nil)
"target backend-subfeatures *SHEBANG-BACKEND-FEATURES*=~@<~S~:>~%"
;;;; cold-init-related PACKAGE and SYMBOL tools
;;; Once we're done with possibly ANSIfying the COMMON-LISP package,
;;; it's probably a mistake if we change it (beyond changing the
;;; values of special variables such as *** and +, anyway). Set up
;;; machinery to warn us when/if we change it.
;;; All code depending on this is itself dependent on #!+SB-SHOW.
(defvar *cl-snapshot* (take-snapshot "COMMON-LISP")))
;;;; master list of source files and their properties
;;; flags which can be used to describe properties of source files
'(;; meaning: This file is not to be compiled when building the
;; cross-compiler which runs on the host ANSI Lisp. ("not host
;; code", i.e. does not execute on host -- but may still be
;; cross-compiled by the host, so that it executes on the target)
;; meaning: This file is not to be compiled as part of the target
;; SBCL. ("not target code" -- but still presumably host code,
;; used to support the cross-compilation process)
;; meaning: This file is to be processed with the SBCL assembler,
;; not COMPILE-FILE. (Note that this doesn't make sense unless
;; :NOT-HOST is also set, since the SBCL assembler doesn't exist
;; while the cross-compiler is being built in the host ANSI Lisp.)
;; meaning: The #'COMPILE-STEM argument called :IGNORE-FAILURE-P
;; should be true. (This is a KLUDGE: I'd like to get rid of it.
;; For now, it exists so that compilation can proceed through the
;; legacy warnings in src/compiler/x86/array.lisp, which I've
;; never figured out but which were apparently acceptable in CMU
;; CL. Eventually, it would be great to just get rid of all
;; warnings and remove support for this flag. -- WHN 19990323)
(defparameter *stems-and-flags* (read-from-file "build-order.lisp-expr"))
(defmacro do-stems-and-flags ((stem flags) &body body)
(let ((stem-and-flags (gensym "STEM-AND-FLAGS")))
`(dolist (,stem-and-flags *stems-and-flags*)
(let ((,stem (first ,stem-and-flags))
(,flags (rest ,stem-and-flags)))
;;; Check for stupid typos in FLAGS list keywords.
(let ((stems (make-hash-table :test 'equal)))
(do-stems-and-flags (stem flags)
(if (gethash stem stems)
(error "duplicate stem ~S in *STEMS-AND-FLAGS*" stem)
(setf (gethash stem stems) t))
(let ((set-difference (set-difference flags *expected-stem-flags*)))
(error "found unexpected flag(s) in *STEMS-AND-FLAGS*: ~S"
;;;; tools to compile SBCL sources to create the cross-compiler
;;; Execute function FN in an environment appropriate for compiling the
;;; cross-compiler's source code in the cross-compilation host.
(defun in-host-compilation-mode (fn)
(declare (type function fn))
(let ((*features* (cons :sb-xc-host *features*))
;; the CROSS-FLOAT-INFINITY-KLUDGE, as documented in
(*shebang-features* (set-difference *shebang-features*
(with-additional-nickname ("SB-XC" "SB!XC")
;;; Process a file as source code for the cross-compiler, compiling it
;;; (if necessary) in the appropriate environment, then loading it
;;; into the cross-compilation host Common lisp.
(defun host-cload-stem (stem &key ignore-failure-p)
(let ((compiled-filename (in-host-compilation-mode
;;; like HOST-CLOAD-STEM, except that we don't bother to compile
(defun host-load-stem (stem &key ignore-failure-p)
(declare (ignore ignore-failure-p)) ; (It's only relevant when
;; compiling.) KLUDGE: It's untidy to have the knowledge of how to
;; construct complete filenames from stems in here as well as in
;; COMPILE-STEM. It should probably be factored out somehow. -- WHN
(load (concatenate 'simple-string *host-obj-prefix* stem *host-obj-suffix*)))
;;;; tools to compile SBCL sources to create object files which will
;;;; be used to create the target SBCL .core file
;;; Run the cross-compiler on a file in the source directory tree to
;;; produce a corresponding file in the target object directory tree.
(defun target-compile-stem (stem &key assem-p ignore-failure-p)
:compile-file (if assem-p
;;; (This function is not used by the build process, but is intended
;;; for interactive use when experimenting with the system. It runs
;;; the cross-compiler on test files with arbitrary filenames, not
;;; necessarily in the source tree, e.g. in "/tmp".)
(defun target-compile-file (filename)
(funcall *target-compile-file* filename))))