From: David B. <dav...@gm...> - 2011-05-30 13:57:49
|
Hi 2011/5/28 Mix Dance <adm...@mi...>: > Je suis l'utilisateur qui n'arrivait pas à installer Liquidsoap, mais > j'ai finalement reussi. As usual, I start from old messages, so I missed it. A good practice is to indicate in the thread that you solved your problem, including the solution if possible. > Par contre, je suis desormais en 1.0.0beta mais les jingles, appelé par > la command "rotate(weights = [1, 1],[jingles, radio])", s’enchaîne > quelque fois: je peux donc avoir 3 jingles à la suite. Comment régler se > premier problème? This must be because the radio source is not ready when it could play a track, so a jingle is played again. You can avoid this by tweaking request preparation in components of your radio source, inserting fallback mechanisms there, or avoiding repetitions of jingles by using delay(10.,jingles) (this produces tracks from jingle, but will be unavailable for 10. after each track). > Deuxièmement, la commande switch ne fonctionne pas (ou la fallback se > déclenche) et je ne peux donc pas programmer des émissions... Comment > régler se deuxième problème? We'll need more details. Most likely, switch is working fine but the sources don't behave as you think. Something could be unavailable. Also, a common mistake is to use crossfade on a source, which merges tracks, breaking the opportunity to do a track-sensitive switch. Good luck! -- David |