I am using the S300 Pro (S30B-2011DA) and it works with the S300 driver. I suspect you need a newer version of the CDS software.

Regards,

Edward

On Thu, Jun 19, 2008 at 3:30 PM, Toby Collett <tcollett+player@plan9.net.nz> wrote:
It is possibly that the non CMS modules dont output in exactly the same format as the CMS ones, I have only used the CMS version with the player driver, so it may be worth investigating from that front.

Toby

2008/6/19 stephang <stephang@sbox.tugraz.at>:


Hi,
Thank you for your quick reply! Now I was able to figure out why I couldn't
find these settings as they're only available for the CMS model (type key
ending with B). I have a type A scanner where I can only configure wether it
outputs continously or not.
So it seems my initial settings were complete and something else must be the
reason why I don't receive any measurement data from the scanner.
Thx again,
Stephan


Toby Collett-8 wrote:
>
> In the CDS software the setting of relevance are the baud rates,
> continuous
> output mode, and in the bottom right of the tab (I think, this is from
> memory) there are 4 rows allowing you to select which ranges of data you
> wish to be output. I have only ever tested with the first entry being the
> full scan (i.e. -95 to +95 , possibly -5 to 185 in the Sick software).
>
> Hope that helps, otherwise you will need to look up the sick
> documentation.
> Once you have some sort of data appearing on the serial line then the
> player
> driver should work...
>
> If you want any of the extra IO packets from the laser then you will need
> to
> modify the driver, it only outputs the contour data at the moment
>
> Toby
>
> 2008/6/18 stephang <stephang@sbox.tugraz.at>:
>
>>
>>
>> Toby Collett-3 wrote:
>> >
>> > I use this driver heavily for both the S3000 and S300, works just fine.
>> > You
>> > need to make sure your laser is configured to output data continuously,
>> > and
>> > make sure it is actually set to output a range (it defaults to zero
>> scan
>> > readings from memory)
>> >
>>
>> Hi,
>> I'm using sick's S300 laser scanner for several days now, but can't get
>> any
>> response from it. I'm working with a RS-422 to USB converter and
>> measurement
>> output should be set to continous mode with means of Sick's CDS, but I'm
>> not
>> sure what configuring output to a range means and where I can find these
>> settings...
>> Maybe you could give me the right clue to get this thing working!
>> Thanks in advance,
>> Regards,
>> Stephan
>> --
>> View this message in context:
>> http://www.nabble.com/S300-problems-tp17533612p17980051.html
>> Sent from the playerstage-users mailing list archive at Nabble.com.
>>
>>
>> -------------------------------------------------------------------------
>> Check out the new SourceForge.net Marketplace.
>> It's the best place to buy or sell services for
>> just about anything Open Source.
>> http://sourceforge.net/services/buy/index.php
>> _______________________________________________
>> Playerstage-users mailing list
>> Playerstage-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/playerstage-users
>>
>
>
>
> --
> This email is intended for the addressee only and may contain privileged
> and/or confidential information
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> Playerstage-users mailing list
> Playerstage-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/playerstage-users
>
>

--
View this message in context: http://www.nabble.com/S300-problems-tp17533612p17998719.html
Sent from the playerstage-users mailing list archive at Nabble.com.


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Playerstage-users mailing list
Playerstage-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/playerstage-users



--
This email is intended for the addressee only and may contain privileged and/or confidential information

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Playerstage-users mailing list
Playerstage-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/playerstage-users