SUNIX CBS2000X

tovis
2005-07-10
2013-04-08
  • tovis
    tovis
    2005-07-10

    serial_cs does not support this card!
    I think that is not so much awful to force it to work, but I do not know where to start.
    At least I need some more deep explanation what serial_cs is doing, or what suppose to be done, what part should be modified - patched.
    Executing dump_cis gives quite resonable results, exclude the type of UART, which is standard 16550 instead of 16C950.
    in syslog
      cardmgr[821]: socket 0: Serial or Modem
      cardmgr[821]: executing: 'modprobe serial_cs'
      cardmgr[821]: get dev info on socket 0 failed: No such a device
      kernel: register_serial(): autoconfig failed
      kernel: serial_cs: regisrter_serial() at 0x0108, irq 3 failed

    This is the clue? - kernel: serial_cs attempting to register unknown device. Where I should give needed information to serial_cs ?

     
    • David Hinds
      David Hinds
      2005-07-11

      Can you show the output of 'dump_cis'?

      -- Dave