Learn how easy it is to sync an existing GitHub or Google Code repo to a SourceForge project! See Demo

Close

[895e46]: utils / opcontrol Maximize Restore History

Download this file

opcontrol    1491 lines (1274 with data), 32.2 kB

#!/bin/sh
#
# opcontrol is a script to control OProfile
# opcontrol --help and opcontrol --list-events have info
#
# Copyright 2002
# Read the file COPYING
#
# Authors: John Levon, Philippe Elie, Will Cohen
#
# NOTE: This script should be as shell independent as possible

SYSCTL=do_sysctl

# A replacement function for the sysctl (procps package) utility which is
# missing on some distribution (e.g. slack 7.0). 
# Handles only the -w option of sysctl.
do_sysctl()
{
	if test "$1" != "-w"; then
		echo "$0 unknown sysctl option" >&2
		exit 1
	fi

	shift

	arg=`echo $1 | awk -F= '{print $1}'`
	val=`echo $1 | awk -F= '{print $2}'`

	dev_name=`echo $arg | tr . /`

	if test ! -f /proc/sys/$dev_name; then
		echo "/proc/sys/$dev_name does not exist or is not a regular file" >&2
		exit 1
	fi
	echo $val > /proc/sys/$dev_name
}


# check value is set
error_if_empty()
{
	if test -z "$2"; then
		echo "No value given for option $1" >&2
		do_help 
		exit 1
	fi
}


# rm_device arguments $1=file_name
rm_device()
{
	if test -c "$1"; then
		vecho "Removing $1"
		rm "$1"
	fi
}


# create_device arguments $1=file_name $2=MAJOR_NR $3=MINOR_NR
create_device()
{
	vecho "Doing mknod $1"
	mknod "$1" c $2 $3
	if test "$?" != "0"; then
		echo "Couldn't mknod $1" >&2
		exit 1
	fi
	chmod 700 "$1"
}


move_and_remove()
{
	if test -e $1; then
		mv $1 $SAMPLES_DIR/.tmp_reset.$$
		rm -rf $SAMPLES_DIR/.tmp_reset.$$
	fi
}


# verbose echo
vecho()
{
	if test -n "$VERBOSE"; then 
		echo $@
	fi
}

 
# print help message
do_help()
{ 
   echo "opcontrol: usage:
   -l/--list-events list event types and unit masks
   -?/--help        this message
   -v/--version     show version
   --init           loads the oprofile module and oprofilefs
   --setup          give setup arguments (may be omitted)
   --status         show configuration
   --start-daemon   start daemon without starting profiling
   -s/--start       start data collection
   -d/--dump        flush the collected profiling data
   -t/--stop        stop data collection
   -h/--shutdown    stop data collection and kill daemon
   -V/--verbose[=all,sfile,arcs,samples,module,misc]     be verbose in the daemon log
   --reset          clears out data from current session
   --save=name      save data from current session to session_name
   --deinit         unload the oprofile module and oprofilefs

   -e/--event=eventspec 

      Choose an event. May be specified multiple times. Of the form
      "default" or "name:count:unitmask:kernel:user", where :

      name:     event name, e.g. CPU_CLK_UNHALTED or RTC_INTERRUPTS
      count:    reset counter value e.g. 100000
      unitmask: hardware unit mask e.g. 0x0f
      kernel:   whether to profile kernel: 0 or 1
      user:     whether to profile userspace: 0 or 1

   -p/--separate=type,[types]

       Separate profiles as follows :

       none:     no profile separation
       library:  separate shared library profiles per-application
       kernel:   same as library, plus kernel profiles
       thread:   per-thread/process profiles
       cpu:      per CPU profiles
       all:      all of the above

   -c/--callgraph=#depth         enable callgraph sample collection with a maximum depth.
                                 Use 0 to disable callgraph profiling.

   -i/--image=name[,names]       list of binaries to profile (default is "all")
   --vmlinux=file                vmlinux kernel image
   --no-vmlinux                  no kernel image (vmlinux) available
   --kernel-range=start,end      kernel range vma address in hexadecimal
   --buffer-size=num             kernel buffer size in sample units
   --buffer-watershed            kernel buffer watershed in sample units (2.6 only=
   --cpu-buffer-size=num         per-cpu buffer size in units (2.6 only)
   --note-table-size             kernel notes buffer size in notes units (2.4 only)
" >&2
}


# load the module and mount oprofilefs
load_module_26()
{
	grep oprofilefs /proc/filesystems >/dev/null
	if test "$?" -ne 0; then
		modprobe oprofile
		if test "$?" != "0"; then
			# couldn't load the module
			return
		fi
		grep oprofile /proc/modules >/dev/null
		if test "$?" != "0"; then
			# didn't find module
			return
		fi
		grep oprofilefs /proc/filesystems >/dev/null
		if test "$?" -ne 0; then
			# filesystem still not around
			return
		fi
	fi
	mkdir /dev/oprofile >/dev/null 2>&1
	grep oprofilefs /etc/mtab >/dev/null
	if test "$?" -ne 0; then
		mount -t oprofilefs nodev /dev/oprofile >/dev/null
	fi
	KERNEL_SUPPORT=yes
	OPROFILE_AVAILABLE=yes
}


load_module_24()
{
	grep oprof /proc/devices >/dev/null
	if test "$?" -ne 0; then
		modprobe oprofile
		if test "$?" != "0"; then
			# couldn't load a module
			return
		fi
		grep oprofile /proc/modules >/dev/null
		if test "$?" != "0"; then
			# didn't find module
			return
		fi
	fi
	KERNEL_SUPPORT=no
	OPROFILE_AVAILABLE=yes
}


load_module()
{
	OPROFILE_AVAILABLE=no
	load_module_26
	if test "$OPROFILE_AVAILABLE" != "yes"; then
		load_module_24
	fi
	if test "$OPROFILE_AVAILABLE" != "yes"; then
		echo "Kernel doesn't support oprofile" >&2
		exit 1
	fi
}

# setup variables related to daemon
do_init_daemon_vars()
{
	# as in op_user.h
	DIR="/var/lib/oprofile"
	LOCK_FILE="/var/lib/oprofile/lock"
	LOG_FILE="$DIR/oprofiled.log"
	SAMPLES_DIR="$DIR/samples"
	CURRENT_SAMPLES_DIR=${SAMPLES_DIR}/current
}

# pick the appropriate locations device for oprofile based on kernel
decide_oprofile_device()
{
	if test "$KERNEL_SUPPORT" = "yes"; then
		MOUNT="/dev/oprofile"
		DEVICE_FILE="$MOUNT/buffer"
	else
		MOUNT="/proc/sys/dev/oprofile"
		DEVICE_FILE="$DIR/opdev"
		NOTE_DEVICE_FILE="$DIR/opnotedev"
		HASH_MAP_DEVICE_FILE="$DIR/ophashmapdev"
	fi
}

# initialise parameters
do_init()
{
	# for these three buffer size == 0 means use the default value
	# hard-coded in op_user.h
	BUF_SIZE=0
	BUF_WATERSHED=0
	CPU_BUF_SIZE=0
	NOTE_SIZE=0
	VMLINUX=
	VERBOSE=""
	SEPARATE_LIB=0
	SEPARATE_KERNEL=0
	SEPARATE_THREAD=0
	SEPARATE_CPU=0
	CALLGRAPH=0

	OPROFILED="$OPDIR/oprofiled"

	# location for daemon setup information
	SETUP_DIR="/root/.oprofile"
	SETUP_FILE="$SETUP_DIR/daemonrc"

	CPUTYPE=`cat $MOUNT/cpu_type`
	OP_COUNTERS=`ls $MOUNT/ | grep "^[0-9]\+\$" | tr "\n" " "`
	NR_CHOSEN=0

	DEFAULT_EVENT=`$OPHELP --get-default-event`
 
	IS_TIMER=0
	IS_PERFMON=0
	if test "$CPUTYPE" = "timer"; then
		IS_TIMER=1
	else
		case "$CPUTYPE" in
			ia64/*)
				IS_PERFMON=$KERNEL_SUPPORT
				;;
		esac
	fi
}


create_dir()
{
	if test ! -d "$1"; then
	       mkdir -p "$1"
	       if test "$?" != "0"; then
		       echo "Couldn't mkdir -p $1" >&2
		       exit 1
	       fi
	       chmod 755 "$1"
	fi
}

get_event()
{
	GOTEVENT=`eval "echo \\$CHOSEN_EVENTS_$1"`
}

set_event()
{
	eval "CHOSEN_EVENTS_$1=$2"
}


# save all the setup related information
do_save_setup()
{
	create_dir "$SETUP_DIR"

	touch $SETUP_FILE
	chmod 644 $SETUP_FILE
	>$SETUP_FILE

	if test "$NR_CHOSEN" != "0"; then
		for f in `seq 0 $((NR_CHOSEN - 1))`; do
			get_event $f
			echo "CHOSEN_EVENTS_${f}=$GOTEVENT" >>$SETUP_FILE
		done
	fi
 
	echo "NR_CHOSEN=$NR_CHOSEN" >>$SETUP_FILE

	echo "SEPARATE_LIB=$SEPARATE_LIB" >> $SETUP_FILE
	echo "SEPARATE_KERNEL=$SEPARATE_KERNEL" >> $SETUP_FILE
	echo "SEPARATE_THREAD=$SEPARATE_THREAD" >> $SETUP_FILE
	echo "SEPARATE_CPU=$SEPARATE_CPU" >> $SETUP_FILE
	echo "VMLINUX=$VMLINUX" >> $SETUP_FILE
	echo "IMAGE_FILTER=$IMAGE_FILTER" >> $SETUP_FILE
	# write the actual information to file
	if test "$BUF_SIZE" != "0"; then
		echo "BUF_SIZE=$BUF_SIZE" >> $SETUP_FILE
	fi
	if test "$BUF_WATERSHED" != "0"; then
		echo "BUF_WATERSHED=$BUF_WATERSHED" >> $SETUP_FILE
	fi
	if test "$KERNEL_SUPPORT" = "yes"; then
		echo "CPU_BUF_SIZE=$CPU_BUF_SIZE" >> $SETUP_FILE
	fi
	if test "$KERNEL_SUPPORT" != "yes"; then
		echo "NOTE_SIZE=$NOTE_SIZE" >> $SETUP_FILE
	fi
	echo "CALLGRAPH=$CALLGRAPH" >> $SETUP_FILE
}


# reload all the setup-related information
do_load_setup()
{
	if test -f "$SETUP_FILE"; then
		# load the actual information from file
		# FIXME this is insecure, arbitrary commands could be added to
		# $SETUP_FILE and be executed as root
		. $SETUP_FILE
	fi

	vecho "Parameters used:"
	vecho "CPUTYPE $CPUTYPE"
	if test "$BUF_SIZE" != "0"; then
		vecho "BUF_SIZE $BUF_SIZE"
	else
		vecho "BUF_SIZE default value"
	fi
	if test "$BUF_WATERSHED" != "0"; then
		vecho "BUF_WATERSHED $BUF_WATERSHED"
	else
		vecho "BUF_WATERSHED default value"
	fi
	if test "$KERNEL_SUPPORT" = "yes"; then
		if test "$CPU_BUF_SIZE" != "0"; then
			vecho "CPU_BUF_SIZE $CPU_BUF_SIZE"
		else
		    vecho "CPU_BUF_SIZE default value"
		fi
	fi

	vecho "SEPARATE_LIB $SEPARATE_LIB"
	vecho "SEPARATE_KERNEL $SEPARATE_KERNEL"
	vecho "SEPARATE_THREAD $SEPARATE_THREAD"
	vecho "SEPARATE_CPU $SEPARATE_CPU"
	vecho "CALLGRAPH $CALLGRAPH"
	vecho "VMLINUX $VMLINUX"
}


check_valid_args()
{
	if test -z "$VMLINUX"; then
		echo "No vmlinux file specified. You must specify the correct vmlinux file, e.g." >&2
		echo "opcontrol --vmlinux=/path/to/vmlinux" >&2
		echo "If you do not have a vmlinux file, use " >&2
		echo "opcontrol --no-vmlinux" >&2
		echo "Enter opcontrol --help for full options" >&2
		exit 1
	fi

	if test -f "$VMLINUX"; then
		return
	fi

	if test "$VMLINUX" = "none"; then
		return
	fi

	echo "The specified vmlinux file \"$VMLINUX\" doesn't exist." >&2
	exit 1
}


# get start and end points of the kernel
get_kernel_range()
{
	if test ! -z "$KERNEL_RANGE"; then
		return;
	fi

	if test "$VMLINUX" = "none"; then
		return;
	fi

	# start at the start of .text and then continue to the end 
	range_info=`objdump -h $VMLINUX 2>/dev/null | grep " .text "`
	tmp1=`echo $range_info | awk '{print $4}'`	
	tmp_length=`echo $range_info | awk  '{print $3}'`
	tmp2=`objdump -h $VMLINUX --adjust-vma=0x$tmp_length 2>/dev/null | grep " .text " | awk  '{print $4}'`

	if test -z "$tmp1" -o -z "$tmp2"; then
		echo "The specified file $VMLINUX does not seem to be valid" >&2
		echo "Make sure you are using vmlinux not vmlinuz" >&2
		vecho "found start as \"$tmp1\", end as \"$tmp2\"" >&2
		exit 1
	fi

	KERNEL_RANGE="`echo $tmp1`,`echo $tmp2`"
	vecho "KERNEL_RANGE $KERNEL_RANGE"
}
 
 
# validate --separate= parameters. This function is called with IFS=,
# so on each argument is splitted
validate_separate_args()
{
	error_if_empty $1 $2	# we need at least one argument
	local i=1
	SEPARATE_LIB=0
	SEPARATE_KERNEL=0
	SEPARATE_THREAD=0
	SEPARATE_CPU=0
	while (($i < $#)); do
		shift
		case "$1" in
			lib|library)
				SEPARATE_LIB=1
				;;
			kernel)
				# first implied by second
				SEPARATE_LIB=1 
				SEPARATE_KERNEL=1
				;;
			thread)
				SEPARATE_THREAD=1
				;;
			cpu)
				SEPARATE_CPU=1
				;;
			all)
				SEPARATE_LIB=1
				SEPARATE_KERNEL=1
				SEPARATE_THREAD=1
				SEPARATE_CPU=1
				;;
			none)
				SEPARATE_LIB=0
				SEPARATE_KERNEL=0
				SEPARATE_THREAD=0
				SEPARATE_CPU=0
				;;
			*)
				echo "invalid --separate= argument: $1"
				exit 1
		esac
	done
}


# check the counters make sense, and resolve the hardware allocation
verify_counters()
{
	if test "$IS_TIMER" = 1; then
		if test "$NR_CHOSEN" != 0; then
	 		echo "You cannot specify any performance counter events" >&2
			echo "because OProfile is in timer mode." >&2
			exit 1
		fi
		return
	fi

	OPHELP_ARGS=

	if test "$NR_CHOSEN" != 0; then
		for f in `seq 0 $((NR_CHOSEN - 1))`; do
			get_event $f
			if test "$GOTEVENT" != ""; then
				OPHELP_ARGS="$OPHELP_ARGS $GOTEVENT"
			fi
		done

		HW_CTRS=`$OPHELP --check-events $OPHELP_ARGS --callgraph=$CALLGRAPH`
		if test "$?" != 0; then
			exit 1
		fi
	fi
}


# setup any needed default value in chosen events
normalise_events()
{
	if test "$NR_CHOSEN" -le 0; then
		return
	fi

	for f in `seq 0 $((NR_CHOSEN - 1))`; do
		get_event $f
		if test "$GOTEVENT" != ""; then
			EVENT=`echo $GOTEVENT | awk -F: '{print $1}'`
			EVENT_VAL=`$OPHELP $EVENT`
			if test "$?" != 0; then
				exit 1
			fi
			COUNT=`echo $GOTEVENT | awk -F: '{print $2}'`
			UNIT_MASK=`echo $GOTEVENT | awk -F: '{print $3}'`
			KERNEL=`echo $GOTEVENT | awk -F: '{print $4}'`
			USER=`echo $GOTEVENT | awk -F: '{print $5}'`
			if test -z "$UNIT_MASK"; then
				TMPEVENT="$EVENT:$COUNT"
				UNIT_MASK=`$OPHELP --unit-mask $TMPEVENT`
				if test "$?" != 0; then
					exit 1
				fi
			fi
			if test -z "$KERNEL"; then
				KERNEL=1
			fi
			if test -z "$USER"; then
				USER=1
			fi

			set_event $f "$EVENT:$COUNT:$UNIT_MASK:$KERNEL:$USER"
		fi
	done
}


# get and check specified options
do_options()
{
	EXCLUSIVE_ARGC=0
	SETUP=no
	NEED_SETUP=no
	SEEN_EVENT=0

	# load any default settings
	do_load_setup

	while [ "$#" -ne 0 ]
	do
		arg=`printf %s $1 | awk -F= '{print $1}'`
		val=`printf %s $1 | awk -F= '{print $2}'`
		shift
		if test -z "$val"; then
			local possibleval=$1
			printf %s $1 "$possibleval" | grep ^- >/dev/null 2>&1
			if test "$?" != "0"; then
				val=$possibleval
				if [ "$#" -ge 1 ]; then 
					shift
				fi
			fi
		fi
 
		case "$arg" in

			--init)
				# this is already done in load_module
				# because need to know the processor type
				# and number of registers
				INIT=yes;
				EXCLUSIVE_ARGC=`expr $EXCLUSIVE_ARGC + 1`
				EXCLUSIVE_ARGV="$arg"
				;;

			--setup)
				SETUP=yes
				;;

			--start-daemon)
				if test "$KERNEL_SUPPORT" != "yes"; then
					echo "$arg unsupported. use \"--start\"" >&2
					exit 1
				fi
				START_DAEMON=yes
				EXCLUSIVE_ARGC=`expr $EXCLUSIVE_ARGC + 1`
				EXCLUSIVE_ARGV="$arg"
				;;

			-s|--start)
				START=yes
				EXCLUSIVE_ARGC=`expr $EXCLUSIVE_ARGC + 1`
				EXCLUSIVE_ARGV="$arg"
				;;

			-d|--dump)
				DUMP=yes
				ONLY_DUMP=yes
				EXCLUSIVE_ARGC=`expr $EXCLUSIVE_ARGC + 1`
				EXCLUSIVE_ARGV="$arg"
				;;

			-t|--stop)
				if test "$KERNEL_SUPPORT" != "yes"; then
					echo "$arg unsupported. use \"--shutdown\"" >&2
					exit 1
				fi
				DUMP=yes
				STOP=yes
				EXCLUSIVE_ARGC=`expr $EXCLUSIVE_ARGC + 1`
				EXCLUSIVE_ARGV="$arg"
				;;

			-h|--shutdown)
				DUMP=yes
				STOP=yes
				KILL_DAEMON=yes
				EXCLUSIVE_ARGC=`expr $EXCLUSIVE_ARGC + 1`
				EXCLUSIVE_ARGV="$arg"
				;;

			--status)
				STATUS=yes
				;;

			--reset)
				DUMP=yes
				RESET=yes
				EXCLUSIVE_ARGC=`expr $EXCLUSIVE_ARGC + 1`
				EXCLUSIVE_ARGV="$arg"
				;;

			--save)
				error_if_empty $arg $val
				DUMP=yes
				SAVE_SESSION=yes
				SAVE_NAME=$val
				EXCLUSIVE_ARGC=`expr $EXCLUSIVE_ARGC + 1`
				EXCLUSIVE_ARGV="$arg"
				;;

			--deinit)
				DUMP=yes
				STOP=yes
				KILL_DAEMON=yes
				DEINIT=yes
				EXCLUSIVE_ARGC=`expr $EXCLUSIVE_ARGC + 1`
				EXCLUSIVE_ARGV="$arg"
				;;

			# --setup options

			--buffer-size)
				error_if_empty $arg $val
				BUF_SIZE=$val
				DO_SETUP=yes
				;;
			--buffer-watershed)
				if test "$KERNEL_SUPPORT" != "yes"; then
					echo "$arg unsupported for this kernel version"
					exit 1
				fi
				error_if_empty $arg $val
				BUF_WATERSHED=$val
				DO_SETUP=yes
				;;
			--cpu-buffer-size)
				if test "$KERNEL_SUPPORT" != "yes"; then
					echo "$arg unsupported for this kernel version"
					exit 1
				fi
				error_if_empty $arg $val
				CPU_BUF_SIZE=$val
				DO_SETUP=yes
				;;
			-e|--event)
				error_if_empty $arg $val
				# reset any read-in defaults from daemonrc
				if test "$SEEN_EVENT" = "0"; then
					NR_CHOSEN=0
					SEEN_EVENT=1
				fi
				if test "$val" = "default"; then
					val=$DEFAULT_EVENT
				fi
				set_event $NR_CHOSEN "$val"
				NR_CHOSEN=`expr $NR_CHOSEN + 1`
				DO_SETUP=yes
				;;
			-p|--separate)
				OLD_IFS=$IFS
				IFS=,
				validate_separate_args $arg $val
				IFS=$OLD_IFS
				DO_SETUP=yes
				;;
			-c|--callgraph)
				error_if_empty $arg $val
				if test ! -f $MOUNT/backtrace_depth; then
					echo "Call-graph profiling unsupported on this kernel/hardware" >&2
					exit 1
				fi
				CALLGRAPH=$val
				DO_SETUP=yes
				;;
			--vmlinux)
				error_if_empty $arg $val
				VMLINUX=$val
				DO_SETUP=yes
				# check validity
				get_kernel_range
				;;
			--no-vmlinux)
				VMLINUX=none
				DO_SETUP=yes
				;;
			--kernel-range)
				error_if_empty $arg $val
				KERNEL_RANGE=$val
				DO_SETUP=yes
				;;
			--note-table-size)
				error_if_empty $arg $val
				if test "$KERNEL_SUPPORT" = "yes"; then
					echo "\"$arg\" meaningless on this kernel" >&2
					exit 1
				else
					NOTE_SIZE=$val
				fi
				DO_SETUP=yes
				;;
			-i|--image)
				error_if_empty $arg $val
				if test "$val" = "all"; then
					IMAGE_FILTER=
				else
					IMAGE_FILTER=$val
				fi
				DO_SETUP=yes
				;;

			-V|--verbose)
				if test -z "$val"; then
					VERBOSE="all"
				else
					VERBOSE=$val
				fi
				;;

			-l|--list-events)
				EXCLUSIVE_ARGC=`expr $EXCLUSIVE_ARGC + 1`
				EXCLUSIVE_ARGV="$arg"
				exec $OPHELP
				;;
				
			*)
				echo "Unknown option \"$arg\". See opcontrol --help" >&2
				exit 1
				;; 
		esac
	done

	normalise_events
	verify_counters

	# error checking to make sure options make sense
	if test "$EXCLUSIVE_ARGC" -gt 1; then
		echo "Option \"$EXCLUSIVE_ARGV\" not valid with other options." >&2
		exit 1
	fi

	if test "$SETUP" = "yes" -a "$DO_SETUP" != "yes"; then
		echo "No options specified for --setup." >&2
		exit 1
	fi

	if test -n "$VERBOSE"; then
		if test "$START" != "yes" -a "$START_DAEMON" != "yes"; then
			echo "Option --verbose may only be used with --start or --start-daemon" >&2
			exit 1
		fi
	fi

	if test "$DO_SETUP" = "yes"; then
		SETUP="$DO_SETUP"
	fi

	if test "$EXCLUSIVE_ARGC" -eq 1 -a "$SETUP" = "yes"; then
		if test "$EXCLUSIVE_ARGV" != "--start-daemon" -a "$EXCLUSIVE_ARGV" != "--start"; then
			echo "Option \"--setup\" not valid with \"$EXCLUSIVE_ARGV\"." >&2
			exit 1
		fi
	fi
}


# stop any existing daemon
do_stop()
{
	if test ! -f "$LOCK_FILE"; then
		echo "Daemon not running" >&2
		return
	fi

	kill -s 0 `cat $LOCK_FILE` 2>/dev/null
	if test "$?" -ne 0; then
		echo "Detected stale lock file. Removing." >&2
		rm -f "$LOCK_FILE"
		return
	fi

	if test $KERNEL_SUPPORT = "yes"; then
		echo "Stopping profiling."
		echo 0 >/dev/oprofile/enable
	fi
	kill -s USR2 `cat $LOCK_FILE` 2>/dev/null
}


# kill the daemon process(es)
do_kill_daemon()
{
	if test ! -f "$LOCK_FILE"; then
		# no error message, do_kill_deamon imply stop and stop already
		# output "Daemon not running"
		return
	fi

	kill -s 0 `cat $LOCK_FILE` 2>/dev/null
	if test "$?" -ne 0; then
		echo "Detected stale lock file. Removing." >&2
		rm -f "$LOCK_FILE"
		return
	fi

	echo "Killing daemon."

	if test $KERNEL_SUPPORT = "yes"; then
		kill -TERM `cat $LOCK_FILE`
	else
		echo 1 >/proc/sys/dev/oprofile/dump_stop
	fi

	COUNT=0
	while test -n "`pidof oprofiled`"
	do
		sleep 1 

		# because oprofiled only sets a variable inside the
		# signal handler itself, it's possible to miss a
		# signal just before it goes to sleep waiting for
		# data from the kernel that never arrives. So we
		# remind it it needs to die - this works because
		# the signal will bring oprofiled out of the kernel
		# back into userspace
		if test $KERNEL_SUPPORT = "yes"; then
			pid=`cat $LOCK_FILE 2>/dev/null`
			kill -TERM "$pid" 2>/dev/null
		fi

		COUNT=`expr $COUNT + 1`
		if test "$COUNT" -eq 15; then
			echo "Daemon stuck shutting down; killing !"
			kill -9 `cat $LOCK_FILE`
		fi
	done

	# already removed unless we forced the kill
	rm -f /var/lib/oprofile/lock
}


rm_devices_24()
{
	rm_device "$DEVICE_FILE"
	rm_device "$NOTE_DEVICE_FILE"
	rm_device "$HASH_MAP_DEVICE_FILE"
}


create_devices_24() 
{
	MAJOR_NR=`grep oprof /proc/devices | awk '{print $1}'`

	create_device $DEVICE_FILE $MAJOR_NR 0
	create_device $NOTE_DEVICE_FILE $MAJOR_NR 2
	create_device $HASH_MAP_DEVICE_FILE $MAJOR_NR 1
}


# setup and start module
do_setup()
{
	create_dir "$DIR"

	>$LOG_FILE

	if test "$KERNEL_SUPPORT" != "yes"; then
		rm_devices_24
		create_devices_24
	fi

	create_dir "$CURRENT_SAMPLES_DIR"
}


# set a sysctl/oprofilefs parameter
set_param()
{
	if test "$KERNEL_SUPPORT" = "yes"; then
		echo $2 >$MOUNT/$1
	else
		$SYSCTL -w dev.oprofile.$1=$2
	fi
}


# set a sysctl/oprofilefs counter parameter
set_ctr_param()
{
	# no such thing for perfmon
	if test "$IS_PERFMON" = "yes"; then
		return
	fi

	if test "$KERNEL_SUPPORT" = "yes"; then
		echo $3 >$MOUNT/$1/$2
	else
		$SYSCTL -w dev.oprofile.$1.$2=$3
	fi
}


# If EVENT_STR has more than one token in it (i.e., the event ID), 
# this implies some additional information is present that is associated 
# with the event.  For example, for PPC64 architectures, the values
# required to program the MMCRs for the given event are returned along 
# with the event.  This function will perform any needed validation
# of such event mapping data.
check_event_mapping_data()
{

	if [ "$CPUTYPE" = "ppc64/power4" -o "$CPUTYPE" = "ppc64/power5" -o "$CPUTYPE" = "ppc64/970" ]; then
		MMCR0=`echo $EVENT_STR | awk '{print $2}'`
		MMCR1=`echo $EVENT_STR | awk '{print $3}'`
		MMCRA=`echo $EVENT_STR | awk '{print $4}'`
		MMCR0_VAL=`echo $MMCR0 | awk -F: '{print $2}'`
		MMCR1_VAL=`echo $MMCR1 | awk -F: '{print $2}'`
		MMCRA_VAL=`echo $MMCRA | awk -F: '{print $2}'`
	
		## mmcr0, mmcr1, mmcra are for all ppc64 counters
		# Save first event mmcr settings to compare with additional
		# events.  All events must have the same mmcrx values i.e. be in
		# the same group.  Only one event is assigned per counter,
		# hence there will not be a conflict on the counters
		if [ "$MMCR0_CK_VAL" = "" ] ; then    
			MMCR0_CK_VAL=$MMCR0_VAL
			MMCR1_CK_VAL=$MMCR1_VAL
			MMCRA_CK_VAL=$MMCRA_VAL
		else
			# make sure all events are from the same group 
                        if test $MMCR0_CK_VAL != $MMCR0_VAL \
                                -o $MMCR1_CK_VAL != $MMCR1_VAL \
                                -o $MMCRA_CK_VAL != $MMCRA_VAL ; then
				echo "ERROR: The specified events are not from the same group."
				echo "       Use 'opcontrol --list-events' to see event groupings."
				exit 1
			fi
		fi
	fi
}


do_param_setup()
{
	# different names
	if test $BUF_SIZE != 0; then
		if test "$KERNEL_SUPPORT" = "yes"; then
			echo $BUF_SIZE >$MOUNT/buffer_size
		else
			$SYSCTL -w dev.oprofile.bufsize=$BUF_SIZE
		fi
	fi

	if test $BUF_WATERSHED != 0; then
		if test "$KERNEL_SUPPORT" = "yes"; then
			echo $BUF_WATERSHED >$MOUNT/buffer_watershed
		else
			echo "buffer-watershed not supported - ignored" >&2
		fi
	fi

	if test $CPU_BUF_SIZE != 0; then
		if test "$KERNEL_SUPPORT" = "yes"; then
			echo $CPU_BUF_SIZE >$MOUNT/cpu_buffer_size
		else
			echo "cpu-buffer-size not supported - ignored" >&2
		fi
	fi

	if test $NOTE_SIZE != 0; then
		set_param notesize $NOTE_SIZE
	fi

	if test "$KERNEL_SUPPORT" = "yes" -a -f $MOUNT/backtrace_depth; then
		set_param backtrace_depth $CALLGRAPH
	elif test "$CALLGRAPH" != "0"; then
		echo "Call-graph profiling not supported - ignored" >&2
	fi

	if test "$IS_TIMER" = 1; then
		return
	fi

	# use the default setup if none set
	if test "$NR_CHOSEN" = 0; then
		set_event 0 $DEFAULT_EVENT
		NR_CHOSEN=1
		HW_CTRS=`$OPHELP --check-events $DEFAULT_EVENT --callgraph=$CALLGRAPH`
		echo "Using default event: $DEFAULT_EVENT"
	fi

	# Necessary in this case :
	# opcontrol ctr0-on ctr1-on then opcontrol ctr0-on
	for f in $OP_COUNTERS ; do
		set_ctr_param $f enabled 0
		set_ctr_param $f event 0
		set_ctr_param $f count 0
	done

	verify_counters

	OPROFILED_EVENTS=
	for f in `seq 0 $((NR_CHOSEN - 1))`; do
		get_event $f
		if test "$GOTEVENT" != ""; then
			EVENT=`echo $GOTEVENT | awk -F: '{print $1}'`
			EVENT_STR=`$OPHELP $EVENT`
			# For some architectures, additional information associated with given
			# event is returned in EVENT_STR, so we validate this information if necessary
			check_event_mapping_data
			EVENT_VAL=`echo $EVENT_STR | awk '{print $1}'`
			COUNT=`echo $GOTEVENT | awk -F: '{print $2}'`
			UNIT_MASK=`echo $GOTEVENT | awk -F: '{print $3}'`
			KERNEL=`echo $GOTEVENT | awk -F: '{print $4}'`
			USER=`echo $GOTEVENT | awk -F: '{print $5}'`
			CTR=`echo $HW_CTRS | awk "{print \\$$((f + 1))}"`

			if test "$EVENT" = "RTC_INTERRUPTS"; then
				set_param rtc_value $COUNT
				$SYSCTL -w dev.oprofile.rtc_value=$COUNT
			else
				set_ctr_param $CTR enabled 1				
				set_ctr_param $CTR event $EVENT_VAL
				let loop_count=1
				for i in ${EVENT_STR}; do
					#Skip first argument of EVENT_STR (event val) since we've already
					#processed that value.
					if test "$loop_count" -gt 1; then
						KEY=`echo $i | awk -F: '{print $1}'`
						VAL=`echo $i | awk -F: '{print $2}'`
						set_ctr_param "" $KEY $VAL
					fi
					let loop_count="$loop_count"+1
				done				
				set_ctr_param $CTR count $COUNT
				set_ctr_param $CTR kernel $KERNEL
				set_ctr_param $CTR user $USER
				set_ctr_param $CTR unit_mask $UNIT_MASK
			fi
			OPROFILED_EVENTS=${OPROFILED_EVENTS}$EVENT:$EVENT_VAL:
			OPROFILED_EVENTS=${OPROFILED_EVENTS}$CTR:$COUNT:$UNIT_MASK:
			OPROFILED_EVENTS=${OPROFILED_EVENTS}$KERNEL:$USER,
		fi
	done
}


do_start_daemon()
{
 
	if test -f "$LOCK_FILE"; then
		kill -s 0 `cat $LOCK_FILE` 2>/dev/null
		if test "$?" -eq 0; then
			return;
		else
			echo "Detected stale lock file. Removing." >&2
			rm -f "$LOCK_FILE"
		fi
	fi
 
	do_setup
	do_load_setup
	check_valid_args
	get_kernel_range
	do_param_setup

	OPD_ARGS=" \
		--separate-lib=$SEPARATE_LIB \
		--separate-kernel=$SEPARATE_KERNEL \
		--separate-thread=$SEPARATE_THREAD \
		--separate-cpu=$SEPARATE_CPU"

	OPD_ARGS="$OPD_ARGS --events=$OPROFILED_EVENTS"

	if test "$VMLINUX" = "none"; then
		OPD_ARGS="$OPD_ARGS --no-vmlinux"
	else
		OPD_ARGS="$OPD_ARGS --vmlinux=$VMLINUX --kernel-range=$KERNEL_RANGE"
	fi

	if ! test -z "$IMAGE_FILTER"; then
		OPD_ARGS="$OPD_ARGS --image=$IMAGE_FILTER"
	fi

	if test -n "$VERBOSE"; then
		OPD_ARGS="$OPD_ARGS --verbose=$VERBOSE"
	fi

	vecho "executing oprofiled $OPD_ARGS"

	$OPROFILED $OPD_ARGS
 
	COUNT=0
	while ! test -f "$DIR/lock"
	do
		sleep 1
		COUNT=`expr $COUNT + 1`
		if test "$COUNT" -eq 10; then
			echo "Couldn't start oprofiled." >&2
			echo "Check the log file \"$LOG_FILE\" and kernel syslog" >&2
			exit 1
		fi
	done

	echo "Daemon started."
}


do_start()
{
	if test "$KERNEL_SUPPORT" = "yes"; then
		echo 1 >$MOUNT/enable
	fi
	kill -s USR1 `cat $LOCK_FILE` 2>/dev/null
	echo "Profiler running."
}


# print status
do_status()
{
	OPROFILED_PID=`cat $DIR/lock 2>/dev/null`
	if test -n "$OPROFILED_PID" -a -d "/proc/$OPROFILED_PID"; then
		echo "Daemon running: pid $OPROFILED_PID"
	else
		echo "Daemon not running"
	fi

	if test "$NR_CHOSEN" != "0"; then
		for f in `seq 0 $((NR_CHOSEN - 1))`; do
			get_event $f
			echo "Event $f: $GOTEVENT"
		done
	fi
 
	SEPARATE=""
	if test "$SEPARATE_LIB" = "1"; then
		SEPARATE="library";
	fi
	if test "$SEPARATE_KERNEL" = "1"; then
		SEPARATE="$SEPARATE kernel";
	fi
	if test "$SEPARATE_THREAD" = "1"; then
		SEPARATE="$SEPARATE thread";
	fi
	if test "$SEPARATE_CPU" = "1"; then
		SEPARATE="$SEPARATE cpu";
	fi

	if test -z "$SEPARATE"; then
		SEPARATE=none
	fi

	echo "Separate options: $SEPARATE"
	echo "vmlinux file: $VMLINUX"

	if test -z "$IMAGE_FILTER"; then
		echo "Image filter: none"
	else
		echo "Image filter: $IMAGE_FILTER"
	fi

	echo "Call-graph depth: $CALLGRAPH"
	if test "$BUF_SIZE" != "0"; then
		echo "Buffer size: $BUF_SIZE"
	fi
	if test "$KERNEL_SUPPORT" != "yes"; then
		if test "$NOTE_SIZE" != "0"; then
			echo "Note buffer size: $NOTE_SIZE"
		fi
	else
		if test "$BUF_WATERSHED" != "0"; then
			echo "CPU buffer watershed: $BUF_WATERSHED"
		fi
		if test "$CPU_BUF_SIZE" != "0"; then
			echo "CPU buffer size: $CPU_BUF_SIZE"
		fi
	fi

	exit 0
}


# do_dump_data
# returns 0 if successful
# returns 1 if the daemon is unable to dump data
# exit 1 if we need to be root to dump
do_dump_data()
{
	# make sure that the daemon is not dead and gone
	if test -e "$DIR/lock"; then
		OPROFILED_PID=`cat $DIR/lock`
		if test ! -d "/proc/$OPROFILED_PID"; then
			echo "dump fail: daemon died during last run ?" >&2
			return 1;
		fi
	else
		return 1;
	fi

	if test "$KERNEL_SUPPORT" = "yes"; then
		# find current time
		TMPFILE=`mktemp /tmp/oprofile.XXXXXX` || exit 1
		if ! test -w $MOUNT/dump; then
			if test `id -u` != "0"; then
				echo "You must be root to dump with this kernel version"
				exit 1
			fi
		fi
		echo 1 > $MOUNT/dump
		# loop until there is a file to check and 
		# the modification data of $MOUNT/dump after TMPFILE
		while [ \( ! -e "$DIR/complete_dump" \) -o \( "$TMPFILE" -nt "$DIR/complete_dump" \) ]
		do
			if test ! -d "/proc/$OPROFILED_PID"; then
				rm $TMPFILE
				echo "dump fail: either daemon died during last run or dies during dump" >&2
				return 1
			fi
			sleep 1;
		done
		rm $TMPFILE
	else
		echo 1 > $MOUNT/dump
		# HACK !
		sleep 2
	fi
	return 0;
}

# do_dump
# returns 0 if successful
# exits if unsuccessful
do_dump()
{
	do_dump_data
	if test $? -ne 0 -a "$ONLY_DUMP" = "yes"; then
		echo "Unable to complete dump of oprofile data: is the oprofile daemon running?" >& 2
		exit 1;
	fi
	return 0;
}

# tell daemon to re-open the sample files
hup_daemon()
{
	if test -f "$LOCK_FILE"; then
		echo -n "Signalling daemon... "
		kill -HUP `cat $LOCK_FILE` 
		echo "done"
	fi
}
 

# move all the sample files to a sample directory
do_save_session()
{
	SAVE_DIR="${SAMPLES_DIR}/${SAVE_NAME}"

	if test -e "$SAVE_DIR"; then
		echo "session $SAVE_DIR already exists" >&2
		exit 1
	fi

	if ! test -e $CURRENT_SAMPLES_DIR; then
		echo "$CURRENT_SAMPLES_DIR doesn't exist: nothing to save" >&2
		exit 0
	fi

	# FIXME: I don't think it's worth checking for empty current directory

	mv $CURRENT_SAMPLES_DIR $SAVE_DIR
	if test "$?" != "0"; then
		echo "Couldn't move $CURRENT_SAMPLES_DIR to $SAVE_DIR" >&2
		exit 1
	fi

	hup_daemon
}


# remove all the sample files
do_reset()
{
	if test -z "$SAMPLES_DIR"; then
		echo "opcontrol:do_reset() SAMPLES_DIR is empty!"
		exit 1;
	fi

	# daemon use {kern} and {root} subdir, it's not a typo to not use ${}
	move_and_remove $SAMPLES_DIR/current/{kern}
	move_and_remove $SAMPLES_DIR/current/{root}

	hup_daemon
}


do_deinit()
{
	# unmount /dev/oprofile if it is mounted
	OPROF_FS=`grep /dev/oprofile /etc/mtab`
	if test -n "$OPROF_FS"; then
		umount /dev/oprofile
	fi
	# unload the oprofile module if it is around
	OPROF_MOD=`lsmod | grep oprofile`
	if test -n "$OPROF_MOD"; then
		echo "Unloading oprofile module" >& 2
		rmmod oprofile
	fi
}


# The function that calls the appropriate operations
do_operations()
{
	# INIT always done by load_module to get access to cputype
	# thus INIT is a noop

	if test "$STATUS" = "yes"; then
		do_status
	fi
 
	if test "$SETUP" = "yes"; then
		check_valid_args
		do_save_setup
	fi

	if test "$START_DAEMON" = "yes"; then
		do_start_daemon
	fi

	if test "$START" = "yes"; then
		do_start_daemon
		do_start
	fi

	if test "$DUMP" = "yes"; then
		do_dump
	fi

	if test "$SAVE_SESSION" = "yes"; then
		do_save_session
	fi

	if test "$STOP" = "yes"; then
		do_stop
	fi

	if test "$KILL_DAEMON" = "yes"; then
		do_kill_daemon
	fi

	if test "$RESET" = "yes"; then
		do_reset
	fi

	if test "$DEINIT" = "yes"; then
		do_deinit
	fi
}
 
# early check for --version, --help
check_version_help()
{

	OPHELP="$OPDIR/ophelp"

	for i in $@; do
		case "$i" in
			-\?|--help)
				do_help
				exit 0
				;;

			-v|--version)
				echo -n "`basename $0`: "
				$OPHELP --version | cut -d' ' -f2-
				exit 0
				;;
 
		esac
	done
}


#determine which module is loaded
check_version()
{
	OPROFILE_AVAILABLE=no
	grep oprofilefs /etc/mtab >/dev/null
	if test "$?" -eq 0; then
		# need to have oprofilefs mounted for this to work on 2.6
		KERNEL_SUPPORT=yes
		OPROFILE_AVAILABLE=yes
		return
	fi
	# need to have /proc/oprof available for this to work on 2.4
	grep oprof /proc/devices >/dev/null
	if test "$?" -eq 0; then
		KERNEL_SUPPORT=no
		OPROFILE_AVAILABLE=yes
		return
	fi
}


# main

# determine the location of opcontrol and related programs
OPCONTROL=`which $0`
OPDIR=`dirname $OPCONTROL`

PATH=/usr/local/bin:/usr/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin

check_version_help $@

if test -z "$1"; then
	do_help
	exit 0
fi

if test `id -u` = "0"; then
	load_module
fi
check_version
do_init_daemon_vars
decide_oprofile_device
if test `id -u` != "0"; then
    if test "$1" = "--dump" -a -z "$2"; then
	ONLY_DUMP=yes
	do_dump
	exit 0;
    elif test "$1" = "--list-events" -a -z "$2"; then
	exec $OPHELP
    else
	echo "Normal users are limited to either '--dump' or '--list-events'." >&2
	exit 1
    fi
fi

do_init
do_options $@
do_operations