openmsx-user — openMSX users share ideas and help each other out with problems

[openMSX-user] [ openmsx-Support Requests-3281042 ] change persistent data and savestates location

[SourceForge.net <no...@so...>]

Support Requests item #3281042, was opened at 2011-04-08 19:44
Message generated for change (Tracker Item Submitted) made by eadmaster
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=3281042&group_id=38274

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Priority: 5
Private: No
Submitted By: eadmaster (eadmaster)
Assigned to: Nobody/Anonymous (nobody)
Summary: change persistent data and savestates location

Initial Comment:
actually. in my Windows system i have
set OPENMSX_USER_DATA=C:\PortableApps\openMSX\Data
but
persistent data is saved in "%USERPROFILE%\My Documents\openMSX",
savestates are saved in "C:\PortableApps\openMSX\savestates".

I'd like to change the location of persistent data and savestates so they go all in one place (%OPENMSX_USER_DATA%/subdirs).


----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=3281042&group_id=38274

[openMSX-user] [ openmsx-Support Requests-3281029 ] autoplug diskb from commandline

[SourceForge.net <no...@so...>]

Support Requests item #3281029, was opened at 2011-04-08 19:33
Message generated for change (Tracker Item Submitted) made by eadmaster
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=3281029&group_id=38274

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Priority: 5
Private: No
Submitted By: eadmaster (eadmaster)
Assigned to: Nobody/Anonymous (nobody)
Summary: autoplug diskb from commandline

Initial Comment:
when i run the command:
> openmsx -diska XAK1ENGgamedisk1.dsk -diskb XAK1ENGuserdisk.dsk
Fatal error: No drive named 'diskb'.
(i'm using Panasonic_FS-A1GT machine)


----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=3281029&group_id=38274

[openMSX-user] [ openmsx-Support Requests-3279674 ] unable to unplug joyporta in startup script

[SourceForge.net <no...@so...>]

Support Requests item #3279674, was opened at 2011-04-07 20:13
Message generated for change (Comment added) made by eadmaster
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=3279674&group_id=38274

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
>Status: Closed
Priority: 5
Private: No
Submitted By: eadmaster (eadmaster)
Assigned to: Nobody/Anonymous (nobody)
Summary: unable to unplug joyporta in startup script

Initial Comment:
If i try to unplug joyporta in a startup script it doesn't work.
It works only if invoked in the console.


----------------------------------------------------------------------

>Comment By: eadmaster (eadmaster)
Date: 2011-04-08 19:31

Message:
thanks, that solved the problem i was having with ppjoy input driver.


----------------------------------------------------------------------

Comment By: eadmaster (eadmaster)
Date: 2011-04-08 19:31

Message:
thanks, that solved the problem i was having with ppjoy input driver.


----------------------------------------------------------------------

Comment By: Manuel Bilderbeek (manuelbi)
Date: 2011-04-08 18:56

Message:
Um, I mean: why do you want to unplug it anyway?

----------------------------------------------------------------------

Comment By: Manuel Bilderbeek (manuelbi)
Date: 2011-04-08 18:56

Message:
I think it is because the autoplug.tcl script gets executed after your
unplug command... 

So, you can either modify that script, or work around it, e.g. by doing
something like this (not tested):

after boot {after frame {unplug joyporta}}

But why do you want to autoplug it anyway?

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=3279674&group_id=38274

[openMSX-user] [ openmsx-Support Requests-3279674 ] unable to unplug joyporta in startup script

[SourceForge.net <no...@so...>]

Support Requests item #3279674, was opened at 2011-04-07 20:13
Message generated for change (Comment added) made by eadmaster
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=3279674&group_id=38274

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Priority: 5
Private: No
Submitted By: eadmaster (eadmaster)
Assigned to: Nobody/Anonymous (nobody)
Summary: unable to unplug joyporta in startup script

Initial Comment:
If i try to unplug joyporta in a startup script it doesn't work.
It works only if invoked in the console.


----------------------------------------------------------------------

>Comment By: eadmaster (eadmaster)
Date: 2011-04-08 19:31

Message:
thanks, that solved the problem i was having with ppjoy input driver.


----------------------------------------------------------------------

Comment By: Manuel Bilderbeek (manuelbi)
Date: 2011-04-08 18:56

Message:
Um, I mean: why do you want to unplug it anyway?

----------------------------------------------------------------------

Comment By: Manuel Bilderbeek (manuelbi)
Date: 2011-04-08 18:56

Message:
I think it is because the autoplug.tcl script gets executed after your
unplug command... 

So, you can either modify that script, or work around it, e.g. by doing
something like this (not tested):

after boot {after frame {unplug joyporta}}

But why do you want to autoplug it anyway?

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=3279674&group_id=38274

[openMSX-user] [ openmsx-Support Requests-2721672 ] openMSX-Debugger expected SYM file

[SourceForge.net <no...@so...>]

Support Requests item #2721672, was opened at 2009-03-30 05:10
Message generated for change (Comment added) made by manuelbi
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=2721672&group_id=38274

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
>Status: Pending
Priority: 5
Private: No
Submitted By: FRS (sd-snatcher)
Assigned to: Nobody/Anonymous (nobody)
Summary: openMSX-Debugger expected SYM file

Initial Comment:

How is the SYM file format that openMSX-debugger expects? I´m trying a SYM file generated by SjASMPlus, but it is just ignored by the debugger.

The file is attached.

----------------------------------------------------------------------

>Comment By: Manuel Bilderbeek (manuelbi)
Date: 2011-04-08 19:07

Message:
Sorry for the late reply....

Mar 31 2009 22:10:32 <turbor>   Edwin_, which compiler produces those sym
files you use in the debugger ?
Mar 31 2009 22:11:43 <Edwin_>   tniasm
Mar 31 2009 22:12:01 <Edwin_>   I think sjasm is the same when you use the
-s flag
Mar 31 2009 22:12:05 <turbor>   thanks


----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=2721672&group_id=38274

[openMSX-user] [ openmsx-Support Requests-3279674 ] unable to unplug joyporta in startup script

[SourceForge.net <no...@so...>]

Support Requests item #3279674, was opened at 2011-04-07 20:13
Message generated for change (Comment added) made by manuelbi
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=3279674&group_id=38274

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Priority: 5
Private: No
Submitted By: eadmaster (eadmaster)
Assigned to: Nobody/Anonymous (nobody)
Summary: unable to unplug joyporta in startup script

Initial Comment:
If i try to unplug joyporta in a startup script it doesn't work.
It works only if invoked in the console.


----------------------------------------------------------------------

>Comment By: Manuel Bilderbeek (manuelbi)
Date: 2011-04-08 18:56

Message:
I think it is because the autoplug.tcl script gets executed after your
unplug command... 

So, you can either modify that script, or work around it, e.g. by doing
something like this (not tested):

after boot {after frame {unplug joyporta}}

But why do you want to autoplug it anyway?

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=421862&aid=3279674&group_id=38274

[openMSX-user] openMSX 0.8.1 released!

[Manuel B. <ma...@ms...>]

Hi all,

We're happy to anounce that openMSX 0.8.1 - Tasmania - has been
released. It includes builds on the previous one, in the sense that we
worked out the features a little more. We added a lot of scripts to help
you with Tool Assisted Speedruns (TAS), one of the reasons openMSX got
officially approved as a TAS capable emulator on tasvideos.org. The
reverse feature also got some updates while doing this. For the rest we
have again mostly fixed smaller issues and added smaller features.
Together with openMSX an updated version of Catapult, our user-friendly
GUI, was released. Please read the release notes for details.

Website: http://www.openmsx.org/
Release notes:
http://sourceforge.net/projects/openmsx/files/openmsx/0.8.1/README_release-notes.txt/view

-- 
Grtjs, Manuel

PS: MSX FOR EVER! (Questions? http://faq.msxnet.org/ )
PPS: Visit my homepage at http://manuel.msxnet.org/

[openMSX-user] openMSX 0.8.0 released!

[Manuel B. <ma...@ms...>]

Hi all,

We're happy to anounce that openMSX 0.8.0 - CSI Dresal - has been 
released. It includes two major new features: reverse and Laserdisc. 
Reverse is similar to what you can do in meisei: you can 'rewind' time 
with your finger tip, to correct game playing mistakes or inspect what 
caused a crash. Laserdisc is the Palcom system introduced by Pioneer in 
1984: now you can play all the Palcom MSX Laserdisc games in openMSX! 
With this release we also provide a first official binary package for 
Dingux on your Dingoo hand held. For the rest we have mostly fixed 
smaller issues and added smaller features. Together with openMSX an 
updated version of Catapult, our user-friendly GUI, was released. Please 
read the release notes for details.

Website: http://www.openmsx.org/
Release notes: 
http://sourceforge.net/projects/openmsx/files/openmsx/0.8.0/release-notes.txt/view

-- 
Grtjs, Manuel

PS: MSX FOR EVER! (Questions? http://faq.msxnet.org/ )
PPS: Visit my homepage at http://manuel.msxnet.org/

[openMSX-user] Release will be soon! Test and report bugs now!

[Manuel B. <ma...@ms...>]

Hi,

We are going to release openMSX 0.7.0 soon (within 2 or 3 weeks). This 
means that if you still know any (especially release critical) bugs that 
are not in the tracker or the Wiki yet, you should speak up *now*!

Also, doing some extra testing would be very useful, and if you find 
something, please report about it a.s.a.p., before it's too late!

Thanks!

Wiki with release status: 
https://apps.sourceforge.net/mediawiki/openmsx/index.php?title=TODO_before_next_release

Bug tracker: http://sourceforge.net/tracker2/?group_id=38274&atid=421861

-- 
Grtjs, Manuel

PS: MSX FOR EVER! (Questions? http://faq.msxnet.org/ )
PPS: Visit my homepage at http://manuel.msxnet.org/

Re: [openMSX-user] [openMSX-devel] openMSX 0.6.3 released

[Patrick <vam...@gm...>]

Also a special thanks to Mars2000you who provided us with updated and new 
trainers and cheats.

Patrick


----- Original Message ----- 
From: "Maarten ter Huurne" <ma...@tr...>
To: <ope...@li...>; 
<ope...@li...>
Sent: Sunday, December 09, 2007 15:13
Subject: [openMSX-devel] openMSX 0.6.3 released


> -------------------------------------------------------------------------
> SF.Net email is sponsored by:
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php


--------------------------------------------------------------------------------


> _______________________________________________
> openMSX-devel mailing list
> ope...@li...
> https://lists.sourceforge.net/lists/listinfo/openmsx-devel
> 

[openMSX-user] openMSX 0.6.3 released

[Maarten t. H. <ma...@tr...>]

Hi all,

The 0.6.3 release is tagged and available on SourceForge. We'll update the=
=20
home page and submit news posts tomorrow.

Special thanks to:
=2D blueMSX team, for their code (SCSI emulation, among others) and good=20
cooperation in general
=2D Blargg, for explaining in detail how his Blip_Buffer works
=2D Wolf, for providing feedback on the audio improvements
=2D BouKiCHi, for helping with Leopard build support and SDL 1.2.12 problems
=2D TFH|Fony, for providing a PC to do the Windows build on

Also thanks to everyone else who made this release possible, including but=
=20
not limited to, the developers and the regular and irregular testers.

I pasted the release notes below.

Bye,
		Maarten

openMSX 0.6.3 (2007-12-09)
=2D-------------------------

This release contains several new features and improvements related to=20
sound. All sound chips are emulated at their native frequency and resampled=
=20
using advanced resampling techniques to the desired output frequency=20
(typically 44.1 kHz). The advanced resamplers improve the sound quality a=20
lot, because they are free of aliasing distortions.

There are three resamplers you can choose from: "fast", which produces=20
approximately the same results as previous openMSX releases, "blip", which=
=20
produces better sound and is still quite fast and "hq", which produces the=
=20
best sound but takes a lot of CPU power. Since the quality difference=20
between "blip" and "hq" is very small and the speed difference quite=20
large, "blip" is the recommended resampler and the new default. Many thanks=
=20
to Blargg, the author of Blip_Buffer, not only for the code but also for=20
explaining the principles behind it.

More sound related improvements include stereo balance settings for each=20
sound chip and the ability to record individual channels of sound chips.=20
=46or PSG we even introduced some sound effects: vibrato and detune can be=
=20
enabled to get a fatter sound. Try this in Penguin Adventure!

Thanks to the blueMSX Team, we were able to quickly bring some new features:
emulation of the VLM5030, the sample chip used in the unreleased Konami game
Keyboard Master and emulation of the synthesis part of the Yamaha SFG-05=20
sound module (keyboard and MIDI support is still missing).

Also on the non-sound department, the code of the blueMSX Team enabled us to
add some new features: Gouda SCSI, MEGA-SCSI, ESE RAM, ESE SCC and WAVE=20
SCSI. Note that the SCSI emulation is still experimental, so make sure you=
=20
don't use it to store data of which you don't have recent backups.

Last but not least: a lock-up bug was removed from the Windows version,=20
which could occur on dual core and hyperthreading CPU's.

New or improved emulator features:
=2D SDLGL-PP renderer (OpenGL 2.0) can now do RGBTriplet scaling in hardwar=
e.
=2D Several resampling algorithms now available: hq, blip and fast; the fir=
st=20
  two eliminate aliasing.
=2D Channels of sound chips can be individually recorded and muted.
=2D Sound chips now have a stereo balance setting instead of a mode (left,=
=20
  right, mono). Because of this, the <sounddevice>_mode settings have been
  replaced by <sounddevice>_balance settings.
=2D PSG sound effects: vibrato and detune.
  You can use the new "psg_profile" command to select known good
  combinations, or experiment wiht the PSG_vibrato_percent,
  PSG_vibrato_frequency, PSG_detune_percent and PSG_detune_frequency
  settings directly.
  Thanks to Wolf for the idea and his feedback on experiments.
=2D Several small optimizations, mostly in SDLGL-PP renderer and CPU
  emulation.

MSX device support:
=2D Partial support for Yamaha SFG-05 (only the YM2151, no keyboard and MID=
I).
=2D Support for the VLM5030 in Konami's Keyboard Master.
=2D Improved accuracy in SCC emulation.
=2D Support for ESE devices: MEGA SCSI, ESE RAM, ESE SCC, WAVE-SCSI.
=2D Support for Gouda/Novaxis SCSI.
=2D Support for password cartridge.
=2D Support for the Super Lode Runner mapper.
=2D Real support for the Halnote mapper. Thanks to the blueMSX team.

Build system, packaging, documentation:
=2D Added support for building a statically linked executable on Windows.
=2D Added support for building a backwards compatible executable on Mac OS X
  10.5 (Leopard). Thanks to BouKiCHi.
=2D Added support for DESTDIR, which should help packagers.

[openMSX-user] Please help beta testing openMSX 0.6.3 RC1!

[Manuel B. <ma...@ms...>]

Hi all,

This is what I wrote a while ago:


-----------------
Hello all,

If you can, please help us betatesting openMSX 0.6.3 Release Candidate
1! You can find the source code here:

http://openmsx.sourceforge.net/temp/openmsx-0.6.3-rc1.tar.gz

(The important changes can be found in the draft of the release notes in
doc/release-notes.txt.)

Please try to compile and run it (on whatever OS you have) and report
your findings here, in our forums (http://forum.openmsx.org/) or on IRC.

If you need help to compile it, you could start here:
http://openmsx.sourceforge.net/manual/compile.html

Or ask us via the aforementioned methods.

Thanks in advance!
-----------------

No reactions yet :(

But, in the mean time, I was able to make a Win32 installer exe for the 
Windows folks to test with (maybe that helps?). Please install it and 
give feedback if things work well (especially stability, new features 
and the installer).

http://openmsx.sourceforge.net/temp/openmsx-0.6.3-rc1-win32-bin.exe

First tests on a few systems seem to indicate it's OK, but your input is 
highly interesting. Please let us know!

-- 
Grtjs, Manuel

PS: MSX FOR EVER! (Questions? http://faq.msxnet.org/ )
PPS: Visit my homepage at http://manuel.msxnet.org/

[openMSX-user] openMSX: No Windows support anymore??

[Manuel B. <ma...@ms...>]

Hi all,

Today I put the following text on the openMSX website 
http://www.openmsx.org/ :

We've said it before: we need someone in our team to help us maintain 
the Windows port of openMSX. At the moment there is no one who provides 
us structural support for the Windows port. Without a person who can 
very regularly build and test openMSX and help in case of (rare) Windows 
specific issues, we cannot maintain the Windows port any longer. We may 
find a way to build the next release, but even that is uncertain; if we 
can manage, it will most likely be released (much) later than the Source 
and Mac versions. If you care and you want to help: please contact us as 
soon as possible!

Please pass the message and if you know someone who's interested: ask 
him/her to contact us. Thanks.

-- 
Grtjs, Manuel

PS: MSX FOR EVER! (Questions? http://faq.msxnet.org/ )
PPS: Visit my homepage at http://manuel.msxnet.org/

[openMSX-user] Please help beta testing openMSX 0.6.3 RC1!

[Manuel B. <ma...@ms...>]

Hello all,

If you can, please help us betatesting openMSX 0.6.3 Release Candidate 
1! You can find the source code here:

http://openmsx.sourceforge.net/temp/openmsx-0.6.3-rc1.tar.gz

(The important changes can be found in the draft of the release notes in 
doc/release-notes.txt.)

Please try to compile and run it (on whatever OS you have) and report 
your findings here, in our forums (http://forum.openmsx.org/) or on IRC.

If you need help to compile it, you could start here: 
http://openmsx.sourceforge.net/manual/compile.html

Or ask us via the aforementioned methods.

Thanks in advance!

-- 
Grtjs, Manuel

PS: MSX FOR EVER! (Questions? http://faq.msxnet.org/ )
PPS: Visit my homepage at http://manuel.msxnet.org/

Re: [openMSX-user] Problems with disk

[Manuel B. <ma...@ms...>]

Hi,

Nicolás García-Pedrajas wrote:
> I'm new at openmsx, although I have used other simulators. The problem 
> is that when I try to use a disk I always get the error:
> 
> Using specified machine: C-BIOS_MSX2+
> 
> Fatal error: No drive named 'diska'.

The C-BIOS machines do not have a disk drive, so you cannot use disks 
with those machines. It seems you have put a disk image in the Catapult 
Disk A text field. Please remove it and try again. That should fix the 
issue.

This version of Catapult is not very intelligent. We're working on a 
much better version (which you could try, the source code is online, see 
the web site), which improves this a lot.

> I'm using version 0.6.1 with debian. Perhaps it has nothing to do but catapult also tells me that most machines are wrong and I can only use 3 of them.

That's because you haven't got any other ROM images installed than the 
C-BIOS ones, which are free software, so which come with openMSX by default.

Other machines need proprietary ROM images. See also the Setup Guide in 
the manual.

> I have spent several hours trying to fix this with no success.

Next time, feel free to ask earlier :) A very low threshold way to do so 
is asking on IRC, we're on #openMSX on irc.freenode.net.

Have fun with openMSX!

-- 
Grtjs, Manuel

PS: MSX FOR EVER! (Questions? http://faq.msxnet.org/ )
PPS: Visit my homepage at http://manuel.msxnet.org/

[openMSX-user] Problems with disk

[<npe...@uc...>]

Hi all:

I'm new at openmsx, although I have used other simulators. The problem 
is that when I try to use a disk I always get the error:

Using specified machine: C-BIOS_MSX2+

Fatal error: No drive named 'diska'.

I'm using version 0.6.1 with debian. Perhaps it has nothing to do but catapult also tells me that most machines are wrong and I can only use 3 of them.

I have spent several hours trying to fix this with no success.

Any help will be thanked.

Greetings


-- 
========================================================================
Nicolás García - Pedrajas, Ph. D. (npe...@uc...)
Computational Intelligence and Bioinformatics Reasearh Group
Department of Computing, University of Córdoba

"Sólo aquello que se conquista luchando tiene valor y consistencia"
León Trotsky (Mi vida)
========================================================================

Re: [openMSX-user] [openMSX-devel] Please help testing the upcoming release

[Manuel B. <ma...@ms...>]

Manuel Bilderbeek wrote:
> So, please help us testing. Get the lastest SVN, compile it and run it 
> in all circumstances you can think of. If you need a Windows binary, 
> please come to #openMSX on irc.freenode.net and ask BiFiMSX.

Now available: an installer of the current SVN for Windows, including an 
optional installer for the ZMBV video codec.

Get it here and try it, please:
http://openmsx.sourceforge.net/temp/openmsx-0.6.2-pre1-win32-bin.exe

And do let us know all good things and problems you have with it, 
please! Thanks in advance.

-- 
Grtjs, Manuel

PS: MSX FOR EVER! (Questions? http://faq.msxnet.org/ )
PPS: Visit my homepage at http://manuel.msxnet.org/

[openMSX-user] Please help testing the upcoming release

[Manuel B. <ma...@ms...>]

Hi all,

We are planning to do a new release very soon. However, the more testing 
is done to the current SVN version, the better, so that we find & fix as 
many bugs as possible before we release.

So, please help us testing. Get the lastest SVN, compile it and run it 
in all circumstances you can think of. If you need a Windows binary, 
please come to #openMSX on irc.freenode.net and ask BiFiMSX.

Known problems:
- Universal Binary cannot be built yet from SVN

Focus points:
- Diskmanipulator (import/create/etc.)
- video recording
- Catapult
- SDLGL-PP renderer
- GFX9000
- trainers
- SCC sound quality
- dot-matrix printer emulation (plug some printer thing in the 
printerport :)
- documentation

Don't hesitate to ask questions!

-- 
Grtjs, Manuel

PS: MSX FOR EVER! (Questions? http://faq.msxnet.org/ )
PPS: Visit my homepage at http://manuel.msxnet.org/

[openMSX-user] Please subscribe before you send mail

[Manuel B. <ma...@ms...>]

Hello all,

We recently changed the options of this mailinglist as an anti-spam 
measure: you have to be subscribed with the mail address you are posting 
with to this list.

So, if your mails suddenly don't end up on the mailinglist anymore, 
please subscribe with the e-mail address you used to post the message 
and it will work fine.

Sorry for the inconvenience, but it's the only way we can prevent the 
spam that was sent to the lists lately.

Thanks for your understanding.

-- 
Grtjs, Manuel

PS: MSX FOR EVER! (Questions? http://faq.msxnet.org/ )
PPS: Visit my homepage at http://manuel.msxnet.org/

[openMSX-user] Join now and choose your level of participation so you can begin enjoying Program benefits.

[Mays M. <nd...@co...>]

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<img alt="curtsy"
 src="cid:par...@co..." height="240"
 width="514"><br>
The disadvantages to continuing with a separate Java Studio Creator IDE
are significant when compared with the option of adding its features and
capabilities to the NetBeans IDE.<br>
Some in the Java community have an idealizedview of the world and think
that if everyone joined one project, wewould produce the best software.
Join the Sun Developer NetworkParticipate and connect to the academic
developer resources you need, when you need them. It also
offerssimplicity in integrating and using existing Java
technology-basedopen-source and commercial projects in developing.<br>
How do you  secure web services?<br>
Excellent  Good  Fair  Poor  Comments:If you would like a reply to your
comment, please submit your email address:Note: We may not respond to
all submitted comments.<br>
Join the Sun Partner Advantage Program Now:   Program OverviewThe
Program architecture is flexible, scaling up in offerings and benefits
based on level of participation.<br>
1 did include a Palette, that Palette did not support drag-and-drop
capabilities. Then post any follow-up questions during thisAsk the
Experts session and get answers from representatives of Sun's Java
platform implementations. Find out how Startup Camp helped him hone his
message, especially during five-minute rounds of Speed Geeking, intense
round-robin "pitch" sessions.<br>
com Would you recommend this Sun site to a friend or colleague?<br>
Type reports in the Folder Name text box and press Enter. If you desire
to sniff packets, you will need to bring a hub toinsertinto your drop to
connect your sniffing equipment. Marketing and SalesHarness our
extensive marketing resources to help promote your own products and
services, and gain access to Sun's ever-expanding customer base. "   
Charles DitzelPartner Area Architect, Sun Microsystems   Sometimes in
the Java software culture, we forget that otherdeveloper cultures see
things through a different lens. Find out more about the Java Verified
Program.<br>
In fact, NetBeans had evolved to such a degree that the Java Studio
Creator 2 IDE release reused a number of the capabilities from NetBeans
4. If the bundled database is not running, right-click the Bundled
Database Server node in the Servers window, and select Start Bundled
Database. Once you know how, these advances will launch your application
performance, scalability, and throughput through the roof.<br>
</body>
</html>

[openMSX-user] meteorite heartburn

[Glass N. <zh...@de...>]

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<img alt="immigrant"
 src="cid:par...@de..." height="448"
 width="267"><br>
A hands-on experienceHome:: Web Directory:: Disabled Equipment News::
Free RSS news:: Free Newsletter:: Tell a FriendClientfinder. Please,
look how my idea looks in Beta in The Unofficial Google Talk Fan Club!
Virtualization, provisioning and orchestration technologies are applied
to IT resources and workloads, resulting in optimized resource usage,
reduced complexity and cost, and improved response time. IBM WebSphere
Business Services Fabric software helps accelerate the development and
deployment of business services that business users need to respond
quickly to market and competitive pressures.<br>
Even his colour is wrong. If someone purchases a new digital camera on
circuitcity. The mian purpose of SideShow is to allow external gadgets
to interact with and display information from a computer running Vista.
Leave "Force old SSL" and "Allow plaintext.<br>
Reports said the plane crashed while trying to land in foggy conditions.
The deal ended 21 years of war between the Muslim north and Christian
south. Google has really changed the way we interact with and perceive
not only the world and others, but ourselves.<br>
Teak Technologies is building a new category of switching solutions to
simplify data center networks and transform them into a Congestion-Free
Zone.<br>
The port should be set to 5222.<br>
It can be used to add a distinctive look to your .<br>
"According to what we know, all five are still safe," Chinese government
spokesman Liu Jianchao told reporters.<br>
To read more about the how. i saw all these things in a website
organicspam.<br>
Engineous software Inc.<br>
At this point, I would be completely satisfied if she fired me.<br>
All other company and product names and service marks may be trademarks
or registered trademarks of their respective companies. Norwegian
University of Science and Technology, Norge Erik Axel Nielsen,
ContestantRuben Spaans, ContestantRune Fevang, Contestant5.<br>
Gospel "Crunk" Hits Fort WayneThe Journal Gazette reports that Gospel
"crunk" has come to Fort Wayne with mixed results.<br>
Many speculate that Google's current test run of VoIP could ultimately
give way to major revenue streams. At the meeting at the end of the day
she called me, the person that i said was negative about helping the
customers, and my co-worker friend into her office. The party is known
for its anti-Semitic, anti-Roma and anti-Hungarian views. Meanwhile five
Chinese workers, kidnapped in the volatile Niger Delta last week, are
said to be safe. 13 micron design rules.<br>
The European Commission is convening its oil supply group on Thursday to
discuss the impact of the cuts, amid reports that some refiners are now
being affected.<br>
</body>
</html>

[openMSX-user] WDSC(WORLDSOURCE INC.) this special for you

[Pinksheets a. <eca...@ca...>]

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html><head><title></title>
<META http-equiv=3DContent-Type content=3D"text/html; charset=3Dwindows-125=
1">
<meta http-equiv=3D"Content-Style-Type" content=3D"text/css">
</head>
<body>

<html>
<head>
"There's one thing I'm not going to do, I'm not going to pull our troops of=
f the battlefield before the mission is complete," he said in a speech sett=
ing the stage for high-stakes meetings with the Iraqi prime minister later =
this week. "We can accept nothing less than victory for our children and ou=
r grandchildren."<br><br>
<style type=3D"text/css">
<!--
body {
	background-color: #FFFFCC;
}
style22 {
	color: #00FF00;
	font-size: x-large;
	font-family: Arial, Helvetica, sans-serif;
	font-weight: bold;
	font-style: italic;
}
style25 {font-family: "Comic Sans MS"; font-weight: bold; font-size: mediu=
m; color: #0000FF; }
style33 {font-family: "Comic Sans MS"; color: #000000; font-weight: bold; =
font-size: medium; }
style34 {font-family: "Comic Sans MS"; font-weight: bold; font-size: mediu=
m; color: #9900FF; }
-->
</style>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-=
1"></head>

<body>
<table width=3D"511" border=3D"3" cellpadding=3D"0" cellspacing=3D"10" bord=
ercolor=3D"#0000FF">
  <tr>
    <td width=3D"501" bordercolor=3D"#00FFFF" bgcolor=3D"#FFFFCC"><div alig=
n=3D"center" class=3D"style34"><tt><span class=3D"style31">INCREDIBLE PROFI=
T BY WORLD SOURCE INC (WDSC.PK)!</tt></div></td>
  </tr>
  <tr>
    <td bordercolor=3D"#00FFFF" bgcolor=3D"#FF0000"><div align=3D"center" c=
lass=3D"style25"><tt>BUY WDSC DO NOT MISS YOUR CHANCE. IT IS COMING TO ERUP=
T!</tt></div></td>
  </tr>
  <tr>
    <td bordercolor=3D"#00FFFF" bgcolor=3D"#00FF00"><div align=3D"center" c=
lass=3D"style25"><tt><span class=3D"style30">BUY IT RIGHT NOW!!!WE WILL HEL=
P YOU TO INCREASE YOUR PROFIT.</tt></div></td>
  </tr>
  <tr>
    <td bordercolor=3D"#00FFFF" bgcolor=3D"#FFFF00"><div align=3D"center" c=
lass=3D"style33"><tt>KNOW MORE INFORMATION ABOUT THIS REALL COMPANY USE YOU=
R BROKERAGE SITE.</tt></div></td>
  </tr>
  <tr>
    <td bordercolor=3D"#00FFFF" bgcolor=3D"#00FF00"><div align=3D"center" c=
lass=3D"style25"><tt>IT=92S GETTING GROWTH ALMOST EVERY HOUR! HURRY INFORM =
AND MAKE YOUR BROKERS BUY IT.</tt></div></td>
  </tr>
  <tr>
    <td bordercolor=3D"#00FFFF" bgcolor=3D"#FFFF00"><div align=3D"center" c=
lass=3D"style33"><tt>YOU MUST REALIZE THAT THIS IS INCREDIBLE STOCK!!! THE =
END OF THIS WEEK WILL PROVE IT!!!</tt></div></td>
  </tr>
  <tr>
    <td bordercolor=3D"#00FFFF" bgcolor=3D"#FFFFCC"><div align=3D"center" c=
lass=3D"style34"><tt>WE INSURE YOU THAT YOU CAN DOUBLE YOUR INVESTMENTS WIT=
H US.</tt></div></td>
  </tr>
</table>
<div align=3D"left"><span class=3D"style22">JOIN WDSC!!!</span></div>
"There's one thing I'm not going to do, I'm not going to pull our troops of=
f the battlefield before the mission is complete," he said in a speech sett=
ing the stage for high-stakes meetings with the Iraqi prime minister later =
this week. "We can accept nothing less than victory for our children and ou=
r grandchildren.""Defeating them will require the full commitment of our al=
liance," Bush said.In Riga to attend a        NATO summit, Bush also enlist=
ed renewed commitments from the NATO allies that have deployed 32,000 troop=
s to        Afghanistan. He said NATO commanders must have the resources an=
d flexibility to do the job =97 an apparent reference to the fact that only=
 a handful of countries =97 primarily Canada, Britain, the United States an=
d the Netherlands =97 are doing much of the heavy lifting in the dangerous =
southern provinces against a resurgent Taliban."There's one thing I'm not g=
oing to do, I'm not going to pull our troops off the battlefield before the=
 mission is complete," he said in a speech setting the stage for high-stake=
s meetings with the Iraqi prime minister later this week. "We can accept no=
thing less than victory for our children and our grandchildren."<br><br>
</html>


</body></html>

[openMSX-user] "Now, if someone else picks up the ball, they can see all the background, " Hedgpeth says.

[Lucy P. S. <hd...@li...>]

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<img alt="cruelty" src="cid:par...@li..."
 height="274" width="467"><br>
Google Co-op Search - Free Web site Search Everyone knows Google is the
king of search engines.<br>
It wasn't nearly as hard as I thought it might be.<br>
It was a lot more like a conversation than an interview. ,,De kritische
interventietijd is vastgesteld op twaalf minuten, vroeger zelfs op acht
minuten. Everyone seems pretty nervous about the difficulty of medical
school. It's not like they're offering one of very few spots. In an
attempt to strengthen its Motors site, eBay began testing Web 2.<br>
There is also an affiliate program through a partnership with Commission
Junction.<br>
Don't leave anything to chance. We decided to eat at a random diner next
to the stadium: "Salt and pepper Diner.<br>
It's a documentary about quadriplegics who play wheelchair rugby.<br>
Finally, I'm taking one graduate class with the School of Public
Health.<br>
In tegenstelling tot borstkanker is de bevolking slechts moeilijk te
motiveren voor een screening. The people were great as well. "Brand
Advocates" have emerged online as primary influencers, with at least a
two-to-one rate of converting an actual friend or family member to buy
the same product or brand.<br>
Outside of class, things have been going alright. "COREsense asked the
right questions at beginning to make sure they got all the data from our
old systems over in as clean and seamless a way as possible. He had to
leave the country in fear of his life. com, it uses an appropriate right
design and layout formula.<br>
Bij mannen de derde, na long- en prostaatkanker. I had a greasy angus
steak burger with onions and cheese on toasted rye bread and a bud
light.<br>
The company hosts the program code and subscribers' data.<br>
A puddle of preservative chemicals pooled around her face, and I felt
guilty.<br>
but the professor cut right to the chase. "China is rapidly
emerging.<br>
He had to leave the country in fear of his life. Freeman argued,
however, that eBay's China investment isn't necessarily a failure. Many
hosting providers will offer premium extended hours over the holiday for
an additional nominal fee. If a doll "died" after going into cardiac
arrest, you could reset it and practice again until you get it right.
eBay Pop lets you track what brands in any category are the big sellers,
and also lets you see average selling prices for each item. Chestnuts
are on the open fire. A good rule of thumb is if you can't reach anyone
before the holiday rush, there's a 99.<br>
The free Village Photos account gives you a 1GB-data transfer limit per
month.<br>
Most have enough control of their hands and arms to throw and catch a
ball about the size of a volleyball. eBay Express: Still In The Slow
Lane. He also said eBay would fail because they were too quick to
replace local management at EachNet with foreigners who didn't
understand China's market.<br>
, company could encounter resistance when it tries to convert Electronic
Clearing House customers to Intuit software.<br>
Either way, I'm going to medical school. If a doll "died" after going
into cardiac arrest, you could reset it and practice again until you get
it right.<br>
This resulted in less priority being given to store inventory in eBay
searches, and the changes also came with increased eBay Store fees.<br>
</body>
</html>

[openMSX-user] roar reading

[Hal O. <su...@ha...>]

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<img alt="cheery" src="cid:par...@ha..."
 height="251" width="505"><br>
Those high waisted 'mom' jeans do NOTHING for a chick's rear end except
make it look flatter and bigger. No, I'm wearing my sock monkey
ones.<br>
But i'm sure you're doing a great job with Mercedes. As I sat there
drooling errrrr. Horse Blog: Police Horse TrailerHorse BlogNews and info
for racing horses, work horses, and riding for fun.<br>
The only excuse I can see is medical problems and even then you should
consult your doctor and a dietician.<br>
I think it's sad that a lot of men think that women are only after them
for their bank account and financial assets.<br>
>From the reading I have done and watching my dog dopiness or being a
clown seems to be the norm for pits. No, I'm wearing my sock monkey
ones.<br>
</body>
</html>

[openMSX-user] open-ended indirect

[Edmund <pd...@sp...>]

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<img alt="whiskey" src="cid:par...@em..."
 height="209" width="652"><br>
If so, what technologies and protocols have you used? Candidates who
have left their technical careers to pursue other interesting career
paths or personal goals and are looking to return are encouraged to
apply. MUST have a BS degree in Civil, Electrical, or Mechanical
Engineering and a Washington State PE license or the ability to obtain
within 1 year. Must be proficient in AutoCAD.<br>
AutoCAD skills preferred.<br>
How many substation projects have you supported?<br>
If so, where and when? Candidates must be able to obtain unescorted
access clearance for a nuclear facility located in the U.<br>
</body>
</html>