Hi everybody,

I'm really new in all this suff, so maybe all my mistakes are really simple, heres my setup:

USRP1
2 RFX1800 -> changed to RFX900 trough burn-db-eeprom

Running on a virtual machine with:

Ubuntu 10.10
GNU Radio - I follow the instructions from here: http://gnuradio.org/redmine/wiki/1/UbuntuInstall
Open BTS 2.6 Mamou

So far I have been able to run OpenBTS, as far as I can understand by looking to the OpenBTS log my phone is been able to send its IMSI, my phone can see my BTS it does not show the GSM Short name properly it shows 33402 but besides that my phones where not able to register to my BTS heres part of my log file:

301342135.1895 INFO 3037444976 PowerManager.cpp:49:increasePower: power increased to -21 dB
1301342135.1895 INFO 3037444976 TRXManager.cpp:248:sendCommandPacket: command CMD SETPOWER 21
1301342137.1773 INFO 3069926256 GSML1FEC.cpp:489:writeLowSide: obj: 0x9065ab8 RACHL1Decoder received RA=12 at time 0:1695210 with RSSI=1.0000 timingError=0.2305
1301342137.1774 INFO 3069926256 RadioResource.cpp:144:AccessGrantResponder: RA=0xc when=0:1695210 age=5 delay=0.2305 RSSI=1.0000
1301342137.1775 INFO 3069926256 GSMLogicalChannel.cpp:42:open:
1301342137.1775 INFO 3069926256 GSMLogicalChannel.cpp:42:open:
1301342137.1775 INFO 3069926256 GSML1FEC.cpp:1515:open: obj: 0x906a940 SACCHL1Encoder
1301342137.1777 INFO 3069926256 GSML1FEC.cpp:1445:setPhy: obj: 0x906b3d8 SACCHL1Decoder RSSI=1.0000timingError=0.2305
1301342137.1777 INFO 3069926256 GSML1FEC.cpp:1479:setPhy: obj: 0x906a940 SACCHL1Encoder RSSI=1.0000 target=-15.0000 deltaP=16.0000 actual=33.0000 order=17.0000
1301342137.1777 INFO 3069926256 GSML1FEC.cpp:1488:setPhy: obj: 0x906a940 SACCHL1Encoder timingError=0.2305 actual=0.0000 ordered=0.2305
1301342137.1777 INFO 3069926256 RadioResource.cpp:221:AccessGrantResponder: sending PageMode=(0) DedicatedModeOrTBF=(TMA=0 Downlink=0 DMOrTBF=0) ChannelDescription=(typeAndOffset=SDCCH/4-0 TN=0 TSC=2 ARFCN=152) RequestReference=(RA=12 T1'=30 T2=10 T3=21) TimingAdvance=0
1301342137.3282 INFO 3066997616 GSML2LAPDm.cpp:901:sendUFrameUI: obj: 0x906ca00 state=LinkReleased payload=primitive=UNIT_DATA raw=(061d8e4c0000000000000100000000000000)
1301342137.3283 INFO 3066997616 GSML2LAPDm.cpp:901:sendUFrameUI: obj: 0x906ca00 state=LinkReleased payload=primitive=UNIT_DATA raw=(061e000a33f42003e82f01)
1301342137.4995 INFO 3066997616 GSML2LAPDm.cpp:901:sendUFrameUI: obj: 0x906ca00 state=LinkReleased payload=primitive=UNIT_DATA raw=(061d8e4c0000000000000100000000000000)
1301342137.4996 INFO 3066731376 GSML2LAPDm.cpp:518:receiveUFrameSABM: obj: 0x906a2c0 state=LinkReleased primitive=DATA raw=(013f49050870330420fffe330839432040633301332b2b)
1301342137.4996 INFO 3066731376 GSML2LAPDm.cpp:860:sendUFrameUA: obj: 0x906a2c0 state=ContentionResolution primitive=DATA raw=(013f49050870330420fffe330839432040633301332b2b)


1301342137.5000 INFO 3067796336 GSML3Message.cpp:162:parseL3: L3 recv MM Location Updating Request LAI=(MCC=334 MNC=020 LAC=0xfffe) MobileIdentity=(IMSI=3340204xxxxxxxx) classmark=(revision=1 ES-IND=1 A5/1=0 powerCap=3)
1301342137.5000 INFO 3067796336 MobilityManagement.cpp:137:LocationUpdatingController: MM Location Updating Request LAI=(MCC=334 MNC=020 LAC=0xfffe) MobileIdentity=(IMSI=3340204xxxxxxxx) classmark=(revision=1 ES-IND=1 A5/1=0 powerCap=3)
1301342137.5000 INFO 3067796336 SIPEngine.cpp:148:Register: user IMSI334xxxxxxxx state Null 0 callID 1938976519
1301342137.5001 INFO 3067796336 SIPInterface.cpp:107:addCall: creating SIP message FIFO callID 1938976519
1301342137.5002 INFO 3067796336 SIPInterface.cpp:167:write: write REGISTER sip:127.0.0.1 SIP/2.0


1301342137.5926 INFO 3069926256 GSML1FEC.cpp:705:handleGoodFrame: obj: 0x906b3d8 SACCHL1Decoder actuals pow=33 TA=0
1301342137.9706 INFO 3066997616 GSML2LAPDm.cpp:901:sendUFrameUI: obj: 0x906ca00 state=LinkReleased payload=primitive=UNIT_DATA raw=(061e000a33f42003e82f01)
1301342137.9706 INFO 3066997616 GSML1FEC.cpp:1557:sendFrame: obj: 0x906a940 SACCHL1Encoder RSSI=0.0000 target=-15.0000 deltaP=15.0000 actual=33.0000 order=17.5000
1301342137.9707 INFO 3066997616 GSML1FEC.cpp:1569:sendFrame: obj: 0x906a940 SACCHL1Encoder timingError=0.3818 actual=0.0000 ordered=0.3062 target=0.3818
1301342138.0635 INFO 3069926256 GSML1FEC.cpp:705:handleGoodFrame: obj: 0x906b3d8 SACCHL1Decoder actuals pow=33 TA=0
1301342138.0636 INFO 3067530096 GSML2LAPDm.cpp:680:receiveUFrameUI: obj: 0x906ca00 state=LinkReleased primitive=DATA raw=(01034906153f3f007f0040000000000000000000002b2b)
1301342138.4416 INFO 3066997616 GSML3Message.cpp:162:parseL3: L3 recv RR Measurement Report BA_USED=0 DTX_USED=0 MEAS_VALID=0 RXLEV_FULL_SERVING_CELL=63 RXLEV_SUB_SERVING_CELL=63 RXQUAL_FULL_SERVING_CELL=0 RXQUAL_SUB_SERVING_CELL=0 NO_NCELL=1 RXLEV_NCELL1=63 BCCH_FREQ_NCELL1=0 BSIC_NCELL1=2
1301342138.4416 INFO 3066997616 GSML2LAPDm.cpp:901:sendUFrameUI: obj: 0x906ca00 state=LinkReleased payload=primitive=UNIT_DATA raw=(061d8e4c0000000000000100000000000000)
1301342138.4417 INFO 3066997616 GSML1FEC.cpp:1557:sendFrame: obj: 0x906a940 SACCHL1Encoder RSSI=0.0000 target=-15.0000 deltaP=15.0000 actual=33.0000 order=17.7500
1301342138.4417 INFO 3066997616 GSML1FEC.cpp:1569:sendFrame: obj: 0x906a940 SACCHL1Encoder timingError=0.3887 actual=0.0000 ordered=0.3474 target=0.3887
1301342138.5343 INFO 3069926256 GSML1FEC.cpp:705:handleGoodFrame: obj: 0x906b3d8 SACCHL1Decoder actuals pow=17 TA=0
1301342138.5346 INFO 3067530096 GSML2LAPDm.cpp:680:receiveUFrameUI: obj: 0x906ca00 state=LinkReleased primitive=DATA raw=(01034906153f3f007f0040000000000000000000003708)
1301342138.9128 INFO 3066997616 GSML3Message.cpp:162:parseL3: L3 recv RR Measurement Report BA_USED=0 DTX_USED=0 MEAS_VALID=0 RXLEV_FULL_SERVING_CELL=63 RXLEV_SUB_SERVING_CELL=63 RXQUAL_FULL_SERVING_CELL=0 RXQUAL_SUB_SERVING_CELL=0 NO_NCELL=1 RXLEV_NCELL1=63 BCCH_FREQ_NCELL1=0 BSIC_NCELL1=2
1301342138.9128 INFO 3066997616 GSML2LAPDm.cpp:901:sendUFrameUI: obj: 0x906ca00 state=LinkReleased payload=primitive=UNIT_DATA raw=(061e000a33f42003e82f01)

Also when my phones are generating trafic to my BTS I belive I also get this message:

OpenBTS> 1299095833.4815 ALARM 3066035056 SIPEngine.cpp:221:Register: SIP register timed out. Is Asterisk OK?
1299095833.4817 ALARM 3066035056 MobilityManagement.cpp:161:LocationUpdatingController: SIP registration timed out. Is Asterisk running?

Im not sure but isnt Astersik already installed with OpenBTS or should I installed as well? How should I do that? Is the phone registration indepent of Asterisk running on the pc or not?

Any help would be truly apreciated.
Thanks in advance.