English

Help
2009-12-24
2013-05-30
1 2 3 > >> (Page 1 of 3)
  • Luigi Tullio
    Luigi Tullio
    2009-12-24

    This is a discussion created to accept help requests, suggestions and reporting errors or malfunctions of NTM.

     
  • arkadaşlar bn kurdum ama kullanabuncher gözükmüo ne yapmm gerekio ?lalmek için

     
  • Hi When I run NTM 1.2 in Ubuntu Lucd in SpanishI get this error:

    $ ntm

    touch: no se puede efectuar `touch' sobre «logfile»: Permiso denegado
    Traceback (most recent call last):
      File "ntm.py", line 34, in <module>
        i18n_lang = gettext.translation(i18n_APP_NAME, i18n_DIR)
      File "/usr/lib/python2.6/gettext.py", line 484, in translation
        raise IOError(ENOENT, 'No translation file found for domain', domain)
    IOError:  No translation file found for domain: 'ntm'

     
  • when I start the program does not error out is no thinking and nothing for a while does not start at boot time, I have ubuntu 10.04.
    Thank you.

     
  • have also the same problem:
    touch: kann „logfile“ nicht berühren: Permission denied
    Traceback (most recent call last):
      File "ntm.py", line 34, in <module>
        i18n_lang = gettext.translation(i18n_APP_NAME, i18n_DIR)
      File "/usr/lib/python2.6/gettext.py", line 484, in translation
        raise IOError(ENOENT, 'No translation file found for domain', domain)
    IOError:  No translation file found for domain: 'ntm'
    I am using ubuntu 10.04- can someone help?

     
  • Hallo again!!
    There is a simple solution for this error.
    open terminal and than as root type:

    gedit  /usr/share/ntm/ntm.py
    

    than set at the line 35 and 38 at the beginning  a #.
    It should looks like this:

    #i18n_lang = gettext.translation(i18n_APP_NAME, i18n_DIR)
    #i18n_lang = gettext.translation(i18n_APP_NAME, i18n_DIR, languages=['it'], fallback = True)  # test
    #global _
     #= i18n_lang.gettext
    

    Now ntm should start

    My is workig :)

     
  • Luigi Tullio
    Luigi Tullio
    2010-08-08

    Hello everyone, I'm back! :)

    >>> For Error "No translation file found for domain":
    This error occurs when you start NTM 1.2 without having done the installation with the DEB files.
    I will release a version which fix the problem.

    To resolve the issue immediately:
    - Decompress ntm-1.2.tar.gz
    - Open a terminal and go into decompressed directory
    - Execute this command: sudo cp -R ./i18n/locale/* /usr/share/locale/

    If you have a similar error with NTM installed by DEB, let me know.

    >>> For Pegoca:
    Send me the log file:
    To obtain the log, open a terminal and execute this command:
    gedit ~/.ntm/ntm.log

    Have a great day!

    (NK)

     
  • Luigi Tullio
    Luigi Tullio
    2010-08-17

    Hi,

    I have release a new version of NTM the 1.2.2.
    Changes in this version:
    + Now, NTM load correctly the translation file.
    + Fix a error in run_ntm.sh
    + Fix a loading error in Ubuntu 9.10
    + Fix the dependences into DEB file.

    (NK)

     
  • Hund
    Hund
    2010-08-20

    When Im trying to start ntm I only recieve this error message:

    ** Message: pygobject_register_sinkfunc is deprecated (GtkWindow)
    ** Message: pygobject_register_sinkfunc is deprecated (GtkInvisible)
    ** Message: pygobject_register_sinkfunc is deprecated (GtkObject)

     
  • Luigi Tullio
    Luigi Tullio
    2010-09-02

    Hi lathund,

    Send me the log: ~/.ntm/ntm.log

    (NK)

     
  • Hund
    Hund
    2010-09-02

    Here you go:

    <<NEW RUN>>
    1.2.2
    2010-09-02 00:33:30
    Linux Neytiri 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 17:14:28 CEST 2010 x86_64 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux
    Description:    Arch Linux
    params: 
    ** Message: pygobject_register_sinkfunc is deprecated (GtkWindow)
    ** Message: pygobject_register_sinkfunc is deprecated (GtkInvisible)
    ** Message: pygobject_register_sinkfunc is deprecated (GtkObject)
    Traceback (most recent call last):
      File "ntm.py", line 718, in <module>
        ntm = NTM()
      File "ntm.py", line 225, in __init__
        self.online_detector = onlinedetector.OnlineDetector(self.general_pref_online_check)
      File "/usr/share/ntm/onlinedetector.py", line 52, in __init__
        proxy = bus.get_object('org.freedesktop.NetworkManager', '/org/freedesktop/NetworkManager')
      File "/usr/lib/python2.6/site-packages/dbus/bus.py", line 244, in get_object
        follow_name_owner_changes=follow_name_owner_changes)
      File "/usr/lib/python2.6/site-packages/dbus/proxies.py", line 241, in __init__
        self._named_service = conn.activate_name_owner(bus_name)
      File "/usr/lib/python2.6/site-packages/dbus/bus.py", line 183, in activate_name_owner
        self.start_service_by_name(bus_name)
      File "/usr/lib/python2.6/site-packages/dbus/bus.py", line 281, in start_service_by_name
        'su', (bus_name, flags)))
      File "/usr/lib/python2.6/site-packages/dbus/connection.py", line 630, in call_blocking
        message, timeout)
    dbus.exceptions.DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
    
     
  • Luigi Tullio
    Luigi Tullio
    2010-09-02

    - lathund -
    Perhaps it is due to the configuration of the previous version.
    Remove or rename the folder: ~ /. ntm

    (NK)

     
  • Wat's about runnung ntm in Opensuse 11.3? Couldn't get the webkit module, but WebKit ist installed.

    • Schnipp --
      qlemi@BLECHTROTTEL:/usr/share/ntm> ./run_ntm.sh

    Traceback (most recent call last):
      File "ntm.py", line 80, in <module>
        import ntmgui
      File "/usr/share/ntm/ntmgui.py", line 27, in <module>
        import webkit
    ImportError: No module named webkit
    - Schnapp ---

    Greetings from Munich, taxilemi@gmx.de

     
  • Luigi Tullio
    Luigi Tullio
    2010-11-22

    Hi taxilemi,
    try to install python-webkit

    Greetings from Rome :)

    NK

     
  • <<NEW RUN>>
    1.2.2
    2010-11-23 12:20:22
    Linux linux 2.6.32-25-generic #45-Ubuntu SMP Sat Oct 16 19:52:42 UTC 2010 x86_64 GNU/Linux
    Description: Ubuntu 10.04.1 LTS
    params:

    Traceback (most recent call last):
      File "ntm.py", line 718, in <module>
        ntm = NTM()
      File "ntm.py", line 193, in __init__
        self.ntmgui = ntmgui.NtmGui(self)
      File "/usr/share/ntm/ntmgui.py", line 104, in __init__
        self.mainWindow.set_icon_from_file(globaldef.NTM_ICON)
    glib.GError: Couldn't recognize the image file format for file './stf/ntm.svg'

     
  • Help!!!!!

    <<NEW RUN>> 1.2.2 2010-11-23 12:20:22 Linux linux 2.6.32-25-generic #45-Ubuntu SMP Sat Oct 16 19:52:42 UTC 2010 x86_64 GNU/Linux Description: Ubuntu 10.04.1 LTS params: Traceback (most recent call last): File "ntm.py", line 718, in <module> ntm = NTM() File "ntm.py", line 193, in __init__ self.ntmgui = ntmgui.NtmGui(self) File "/usr/share/ntm/ntmgui.py", line 104, in __init__ self.mainWindow.set_icon_from_file(globaldef.NTM_ICON) glib.GError: Couldn't recognize the image file format for file './stf/ntm.svg'

     
  • My ntm detect that Im online, but not showing speed, and not calculate a network usage.

    Can anyone help me??? Please!

    Sorry for my bad english.

     
  • Hello,

    if there is away the programme in German to translated. Unfortunately, I have not managed this with "poedit" yet. can somebody help me in it? unfortunately, there is also none ntm.pot datei.

     
  • I have free net usage from 2am to 8am. If you can include option to pause net-monitoring in free usage period it would be a great help for many. Thank you for such a nice work

     
  • hello!!
    Can anybody tell me how to install it in opensuse?
    Thanks a lot .

     
  • Ben
    Ben
    2011-02-15

    hey. I just got ubuntu and nettraffic monitor, so they will both be the newest. My NTW does not show that i have used any data, when i have. Please help. Thanks.

     
  • Ben
    Ben
    2011-02-15

    NTM*

     
  • Luigi Tullio
    Luigi Tullio
    2011-03-05

    Hi, sorry for the late

    To fix the error: glib.GError: Couldn't recognize the image file format for file './stf/ntm.svg'
    install the package python-rsvg

    For the message 2010-11-23 21:54:37 CET:
    Check the network interface name in the Preferences. Example: use ppp0 instead ttyACM0

    The next version is translated also in german.

    The option for "free usage" is a good idea, thanks for the suggestion.

    You can use NTM on opensuse, need to dowload the tar.gz file, decompress and run the script run_ntm.sh in the src directory.

    Hi btf18, can you explain your problem?

    Best regards

    NK

     

  • Anonymous
    2011-03-24

    Hi,

    would it be complicated to add totals per program of the period?
    eg=> thunderburd: x% , firefox y%

    thanks,
    Marc

     
  • Luigi Tullio
    Luigi Tullio
    2011-05-04

    Hello,

    I use a system that is unable to provide these informations. sorry

    NK

     
1 2 3 > >> (Page 1 of 3)