Learn how easy it is to sync an existing GitHub or Google Code repo to a SourceForge project! See Demo

Close

Diff of /cisco/CISCO-INTERFACETOPN-EXT-MIB.my [e395ef] .. [e995bb] Maximize Restore

  Switch to side-by-side view

--- a/cisco/CISCO-INTERFACETOPN-EXT-MIB.my
+++ b/cisco/CISCO-INTERFACETOPN-EXT-MIB.my
@@ -1,352 +1,358 @@
 -- *****************************************************************
--- CISCO-INTERFACETOPN-EXT-MIB 
---
--- July 2005, Lilian Jiang  
---
--- Copyright (c) 2005 by Cisco Systems, Inc.
+-- CISCO-INTERFACETOPN-EXT-MIB
+--   
+-- July 2005, Lilian Jiang
+--   
+-- Copyright (c) 2005, 2010 by Cisco Systems Inc.
 -- All rights reserved.
 -- *****************************************************************
 
 CISCO-INTERFACETOPN-EXT-MIB DEFINITIONS ::= BEGIN
 
 IMPORTS
-        MODULE-IDENTITY,
-        OBJECT-TYPE
-                FROM SNMPv2-SMI
-        MODULE-COMPLIANCE,
-        OBJECT-GROUP
-                FROM SNMPv2-CONF
-        ciscoMgmt
-                FROM CISCO-SMI
-        interfaceTopNControlEntry
-                FROM INTERFACETOPN-MIB
-        VlanIndex
-                FROM Q-BRIDGE-MIB;
+    MODULE-IDENTITY,
+    OBJECT-TYPE
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF
+    ciscoMgmt
+        FROM CISCO-SMI
+    interfaceTopNControlEntry
+        FROM INTERFACETOPN-MIB
+    VlanIndex
+        FROM Q-BRIDGE-MIB;
+
 
 ciscoInterfaceTopNExtMIB MODULE-IDENTITY
-        LAST-UPDATED        "200801150000Z"
-        ORGANIZATION        "Cisco Systems, Inc."
-        CONTACT-INFO
-                "       Cisco Systems
-                        Customer Service
-
-                Postal: 170 W Tasman Drive
-                        San Jose, CA  95134
-                        USA
-
-                   Tel: +1 800 553-NETS
-
-                E-mail: cs-lan-switch-snmp@cisco.com"
-        DESCRIPTION
-                "This MIB module is an extension to INTERFACETOPN-MIB.
-                It provides additional management information for
-                sorting device interfaces." 
-
-        REVISION        "200801150000Z"
-        DESCRIPTION 
-                "Modified the object descriptions of
-                 citneInterfaceTopNCounterType,
-                 citneInterfaceTopNInterfaceType 
-                 and citneInterfaceTopNVlanNumber."
-        REVISION        "200603150000Z"
-        DESCRIPTION 
-                "Initial version of this MIB module."
-        ::= { ciscoMgmt 482 }
-
-ciscoInterfaceTopNExtMIBNotifs OBJECT IDENTIFIER 
-                               ::= { ciscoInterfaceTopNExtMIB 0 }
-
-ciscoInterfaceTopNExtMIBObjects OBJECT IDENTIFIER
-                               ::= { ciscoInterfaceTopNExtMIB 1 }
-
-ciscoInterfaceTopNExtMIBConform OBJECT IDENTIFIER
-                               ::= { ciscoInterfaceTopNExtMIB 2 }
+    LAST-UPDATED    "201010190000Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+
+            Postal: 170 W Tasman Drive
+            San Jose, CA  95134
+            USA
+
+            Tel: +1 800 553-NETS
+
+            E-mail: cs-lan-switch-snmp@cisco.com"
+    DESCRIPTION
+        "This MIB module is an extension to INTERFACETOPN-MIB.
+        It provides additional management information for
+        sorting device interfaces."
+    REVISION        "201010190000Z"
+    DESCRIPTION
+        "Add fortyGigaEthernet
+        in citneInterfaceTopNInterfaceType"
+    REVISION        "200801150000Z"
+    DESCRIPTION
+        "Modified the object descriptions of
+        citneInterfaceTopNCounterType,
+        citneInterfaceTopNInterfaceType 
+        and citneInterfaceTopNVlanNumber."
+    REVISION        "200603150000Z"
+    DESCRIPTION
+        "Initial version of this MIB module."
+    ::= { ciscoMgmt 482 }
+
+
+ciscoInterfaceTopNExtMIBNotifs  OBJECT IDENTIFIER
+    ::= { ciscoInterfaceTopNExtMIB 0 }
+
+ciscoInterfaceTopNExtMIBObjects  OBJECT IDENTIFIER
+    ::= { ciscoInterfaceTopNExtMIB 1 }
+
+ciscoInterfaceTopNExtMIBConform  OBJECT IDENTIFIER
+    ::= { ciscoInterfaceTopNExtMIB 2 }
+
 
 -- Interface Top N capability
 
 citneInterfaceTopNCaps OBJECT-TYPE
-    SYNTAX      BITS { 
-                      utilization(0),
-                      bytes(1),
-                      packets(2),  
-                      broadcast(3),
-                      multicast(4), 
-                      overflow(5)
-                }
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-            "The type of interface counters the system is capable to
-            do sorting on, as an extension to the interfaceTopNCaps 
-            defined in INTERFACETOPN-MIB. 
-           
-            utilization --  The interface bandwidth utilization in 
-                            32-bit version. The utilization on 
-                            ethernet interface is computed in the 
-                            following methods:
-
-              Ethernet utilization: (for full duplex interface, 
-                                     divide by 2)
-
-              10 Mbps         I/O-pkts * (9.6 + 6.4) + (0.8 * I/O-Bytes)
-              Ethernet Util = -----------------------------------------
-                              Interval * 10,000
-
-                              where 9.6 is interframe gap of Ethernet
-                              6.4 is preamble of Ethernet
-                              10,000 is 10Mbps
-
-              100 Mbps        I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
-              Ethernet Util = --------------------------------------
-                              Interval * 1,000,000
-
-              1000 Mbps       I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
-              Ethernet Util = --------------------------------------
-                              Interval * 10,000,000
-
-              10000Mbps       I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
-              Ethernet Util = --------------------------------------
-                              Interval * 100,000,000
-
-              All other       I/O-pkts * (9.6 + 6.4) + (0.8 * I/O-Bytes)
-              Ethernet Util = ------------------------------------------
-                              Interval * N * 1,000
-                              (where N is N Mbps)
-
-            bytes -- the total number of bytes received and transmitted 
-                     on the interface in 64-bit version.  
-
-            packets -- the total number of packets received and 
-                     transmitted on  the interface in 64-bit version.
-
-            broadcast -- the total number of broadcast packets received 
-                     and transmitted on the interface in 64-bit version.
-
-            multicast -- the total number of multicast packets received 
-                     and transmitted on the interface in 64-bit version.
-
-            overflow -- the total number of transmitted buffer overflow 
-                     errors on the interface in 32-bit version. 
-            "
-    ::= { ciscoInterfaceTopNExtMIBObjects 1 } 
-
+    SYNTAX          BITS {
+                        utilization(0),
+                        bytes(1),
+                        packets(2),
+                        broadcast(3),
+                        multicast(4),
+                        overflow(5)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The type of interface counters the system is capable to
+        do sorting on, as an extension to the interfaceTopNCaps 
+        defined in INTERFACETOPN-MIB. 
+
+        utilization --  The interface bandwidth utilization in 
+                        32-bit version. The utilization on 
+                        ethernet interface is computed in the 
+                        following methods:
+
+          Ethernet utilization: (for full duplex interface, 
+                                 divide by 2)
+
+          10 Mbps         I/O-pkts * (9.6 + 6.4) + (0.8 * I/O-Bytes)
+          Ethernet Util = -----------------------------------------
+                          Interval * 10,000
+
+                          where 9.6 is interframe gap of Ethernet
+                          6.4 is preamble of Ethernet
+                          10,000 is 10Mbps
+
+          100 Mbps        I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
+          Ethernet Util = --------------------------------------
+                          Interval * 1,000,000
+
+          1000 Mbps       I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
+          Ethernet Util = --------------------------------------
+                          Interval * 10,000,000
+
+          10000Mbps       I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
+          Ethernet Util = --------------------------------------
+                          Interval * 100,000,000
+
+          All other       I/O-pkts * (9.6 + 6.4) + (0.8 * I/O-Bytes)
+          Ethernet Util = ------------------------------------------
+                          Interval * N * 1,000
+                          (where N is N Mbps)
+
+        bytes -- the total number of bytes received and transmitted 
+                 on the interface in 64-bit version.  
+
+        packets -- the total number of packets received and 
+                 transmitted on  the interface in 64-bit version.
+
+        broadcast -- the total number of broadcast packets received 
+                 and transmitted on the interface in 64-bit version.
+
+        multicast -- the total number of multicast packets received 
+                 and transmitted on the interface in 64-bit version.
+
+        overflow -- the total number of transmitted buffer overflow 
+                 errors on the interface in 32-bit version." 
+    ::= { ciscoInterfaceTopNExtMIBObjects 1 }
 -- Interface Top N Control Table
 
 citneInterfaceTopNControlTable OBJECT-TYPE
-    SYNTAX      SEQUENCE OF CitneInterfaceTopNControlEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-            "A table providing supplemental parameter information 
-            for interfaceTopNControlTable as defined in 
-            INTERFACETOPN-MIB."
-     ::= { ciscoInterfaceTopNExtMIBObjects 2 }
+    SYNTAX          SEQUENCE OF CitneInterfaceTopNControlEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A table providing supplemental parameter information
+        for interfaceTopNControlTable as defined in 
+        INTERFACETOPN-MIB."
+    ::= { ciscoInterfaceTopNExtMIBObjects 2 }
 
 citneInterfaceTopNControlEntry OBJECT-TYPE
-    SYNTAX      CitneInterfaceTopNControlEntry
-    MAX-ACCESS  not-accessible
-    STATUS      current
-    DESCRIPTION
-            "An entry providing supplemental parameter information
-            that control the creation of a report of the top 
-            N ports according to several metrics."  
-    AUGMENTS    { interfaceTopNControlEntry }
+    SYNTAX          CitneInterfaceTopNControlEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry providing supplemental parameter information
+        that control the creation of a report of the top 
+        N ports according to several metrics."
+    AUGMENTS           { interfaceTopNControlEntry  } 
     ::= { citneInterfaceTopNControlTable 1 }
 
 CitneInterfaceTopNControlEntry ::= SEQUENCE {
-    citneInterfaceTopNCounterType      INTEGER,
-    citneInterfaceTopNInterfaceType    INTEGER,
-    citneInterfaceTopNVlanNumber       VlanIndex  
+        citneInterfaceTopNCounterType   INTEGER,
+        citneInterfaceTopNInterfaceType INTEGER,
+        citneInterfaceTopNVlanNumber    VlanIndex
 }
 
 citneInterfaceTopNCounterType OBJECT-TYPE
-    SYNTAX      INTEGER {
-                    none(1),
-                    utilization(2),
-                    bytes(3),
-                    packets(4),
-                    broadcast(5),
-                    multicast(6),
-                    overflow(7)
-                }         
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-            "The particular counter type to be sampled, as
-            an extension to the interfaceTopNObjectVariable
-            defined in INTERFACETOPN-MIB.
-
-            Setting this object to the value of 'none' indicates
-            that the TopN sampling is based on the counter type 
-            as specified by the corresponding 
-            interfaceTopNObjectVariable for the same entry
-            in interfaceTopNControlTable; Setting this object 
-            to a value other than 'none' indicates that the 
-            TopN sampling is based on the counter type as 
-            specified by this object instead of the 
-            counter type as specified by the 
-            corresponding interfaceTopNObjectVariable for 
-            the same entry in interfaceTopNControlTable.    
-
-            For entries in the interfaceTopNTable in the 
-            INTERFACETOPN-MIB reported for counter type as specified 
-            by this citneInterfaceTopNCounterType: 
-            (1) The corresponding interfaceTopNDataSourceIndex will 
-                point to the ifIndex of the sorted interfaces; 
-            (2) If the sampled counter type is one of the following
-                32 bit counters: 
-                       'utilization',
-                       'overflow', 
-                the interfaceTopNValue object is used in 
-                the corresponding entries in interfaceTopNTable.
-           
-                If the sampled counter type is one of the following
-                64 bit counters: 
-                       'bytes', 
-                       'packets',
-                       'broadcast',
-                       'multicast',
-                the interfaceTopNValue64 object is used 
-                in the corresponding entries in interfaceTopNTable. 
-
-            This object may not be modified if the associated
-            interfaceTopNRowStatus object is equal to 'active'."
-     DEFVAL { none }
-     ::= { citneInterfaceTopNControlEntry 1 }
+    SYNTAX          INTEGER  {
+                        none(1),
+                        utilization(2),
+                        bytes(3),
+                        packets(4),
+                        broadcast(5),
+                        multicast(6),
+                        overflow(7)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The particular counter type to be sampled, as
+        an extension to the interfaceTopNObjectVariable
+        defined in INTERFACETOPN-MIB.
+
+        Setting this object to the value of 'none' indicates
+        that the TopN sampling is based on the counter type 
+        as specified by the corresponding 
+        interfaceTopNObjectVariable for the same entry
+        in interfaceTopNControlTable; Setting this object 
+        to a value other than 'none' indicates that the 
+        TopN sampling is based on the counter type as 
+        specified by this object instead of the 
+        counter type as specified by the 
+        corresponding interfaceTopNObjectVariable for 
+        the same entry in interfaceTopNControlTable.    
+
+        For entries in the interfaceTopNTable in the 
+        INTERFACETOPN-MIB reported for counter type as specified 
+        by this citneInterfaceTopNCounterType: 
+        (1) The corresponding interfaceTopNDataSourceIndex will 
+            point to the ifIndex of the sorted interfaces; 
+        (2) If the sampled counter type is one of the following
+            32 bit counters: 
+                   'utilization',
+                   'overflow', 
+            the interfaceTopNValue object is used in 
+            the corresponding entries in interfaceTopNTable.
+
+            If the sampled counter type is one of the following
+            64 bit counters: 
+                   'bytes', 
+                   'packets',
+                   'broadcast',
+                   'multicast',
+            the interfaceTopNValue64 object is used 
+            in the corresponding entries in interfaceTopNTable. 
+
+        This object may not be modified if the associated
+        interfaceTopNRowStatus object is equal to 'active'."
+    DEFVAL          { none } 
+    ::= { citneInterfaceTopNControlEntry 1 }
+
+citneInterfaceTopNInterfaceType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        all(1),
+                        ethernet(2),
+                        fastEthernet(3),
+                        gigaEthernet(4),
+                        tenGigaEthernet(5),
+                        portChannel(6),
+                        layer2(7),
+                        layer3(8),
+                        fortyGigaEthernet(9)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "Specifies the interface type for the TopN sampling.
+
+        all -- all applicable interfaces in the system.
+
+        ethernet -- all Ethernet interfaces in the system.        
+
+        fastEthernet -- all FastEthernet interfaces in the system.
+
+        gigaEthernet -- all GigabitEthernet interfaces in the 
+                        system. 
+
+        tenGigaEthernet -- all TenGigabitEthernet interfaces 
+                           in the system.
+
+        portChannel -- all Port-channel interfaces in the system. 
+
+        layer2 -- all layer-2 interfaces in the system. 
+
+        layer3 -- all layer-3 interfaces in the system.  
+
+        fortyGigaEthernet -- all FortyGigabitEthernet interfaces 
+                           in the system.
+
+        This object may not be modified if the associated
+        interfaceTopNRowStatus object is equal to 'active'."
+    DEFVAL          { all } 
+    ::= { citneInterfaceTopNControlEntry 2 }
+
+citneInterfaceTopNVlanNumber OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "Specifies the Vlan number for the layer-2 interfaces when
+        the object value of citneInterfaceTopNInterfaceType 
+        for the same entry is 'layer2'. If the object value
+        of citneInterfaceTopNVlanNumber is other than zero and 
+        the corresponding citneInterfaceTopNInterfaceType is 
+        'layer2' for the same entry, then it indicates all 
+        layer-2 interfaces in that VLAN is sampled.  If the 
+        object value of citneInterfaceTopNVlanNumber is zero 
+        and the corresponding citneInterfaceTopNInterfaceType 
+        is 'layer2' for the same entry, then it indicates all 
+        layer-2 interfaces in the system regardless of their 
+        Vlan number is sampled. If the object value of 
+        citneInterfaceTopNInterfaceType is other than 
+        'layer2', then citneInterfaceTopNVlanNumber has to take
+        the value of 0.
+
+        This object may not be modified if the associated
+        interfaceTopNRowStatus object is equal to 'active'."
+    DEFVAL          { 0 } 
+    ::= { citneInterfaceTopNControlEntry 3 }
  
-citneInterfaceTopNInterfaceType OBJECT-TYPE
-    SYNTAX      INTEGER {
-                    all(1),
-                    ethernet(2),
-                    fastEthernet(3),
-                    gigaEthernet(4),
-                    tenGigaEthernet(5),
-                    portChannel(6),
-                    layer2(7),  
-                    layer3(8)
-                }
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION 
-            "Specifies the interface type for the TopN sampling. 
-            
-            all -- all applicable interfaces in the system.
-
-            ethernet -- all Ethernet interfaces in the system.        
-
-            fastEthernet -- all FastEthernet interfaces in the system.
-          
-            gigaEthernet -- all GigabitEthernet interfaces in the 
-                            system. 
-
-            tenGigaEthernet -- all TenGigabitEthernet interfaces 
-                               in the system.
-
-            portChannel -- all Port-channel interfaces in the system. 
-
-            layer2 -- all layer-2 interfaces in the system. 
-
-            layer3 -- all layer-3 interfaces in the system.  
- 
-            This object may not be modified if the associated
-            interfaceTopNRowStatus object is equal to 'active'."
-    DEFVAL { all }
-    ::= { citneInterfaceTopNControlEntry 2 }
-
-citneInterfaceTopNVlanNumber OBJECT-TYPE
-    SYNTAX      VlanIndex 
-    MAX-ACCESS  read-create
-    STATUS      current
-    DESCRIPTION
-            "Specifies the Vlan number for the layer-2 interfaces when
-            the object value of citneInterfaceTopNInterfaceType 
-            for the same entry is 'layer2'. If the object value
-            of citneInterfaceTopNVlanNumber is other than zero and 
-            the corresponding citneInterfaceTopNInterfaceType is 
-            'layer2' for the same entry, then it indicates all 
-            layer-2 interfaces in that VLAN is sampled.  If the 
-            object value of citneInterfaceTopNVlanNumber is zero 
-            and the corresponding citneInterfaceTopNInterfaceType 
-            is 'layer2' for the same entry, then it indicates all 
-            layer-2 interfaces in the system regardless of their 
-            Vlan number is sampled. If the object value of 
-            citneInterfaceTopNInterfaceType is other than 
-            'layer2', then citneInterfaceTopNVlanNumber has to take
-            the value of 0.
-
-            This object may not be modified if the associated
-            interfaceTopNRowStatus object is equal to 'active'."
-    DEFVAL { 0 }
-    ::= { citneInterfaceTopNControlEntry 3 }
-
 
 -- Notifications
 -- (none defined)
-
+--   
 -- Conformance
 
-ciscoIfTopNExtMIBCompliances        OBJECT IDENTIFIER ::=
-                                  { ciscoInterfaceTopNExtMIBConform 1 }
-ciscoIfTopNExtMIBGroups             OBJECT IDENTIFIER ::=
-                                  { ciscoInterfaceTopNExtMIBConform 2 }
+ciscoIfTopNExtMIBCompliances  OBJECT IDENTIFIER
+    ::= { ciscoInterfaceTopNExtMIBConform 1 }
+
+ciscoIfTopNExtMIBGroups  OBJECT IDENTIFIER
+    ::= { ciscoInterfaceTopNExtMIBConform 2 }
+
 
 ciscoIfTopNExtMIBCompliance MODULE-COMPLIANCE
-    STATUS  current
-    DESCRIPTION
-            "Describes the requirements for conformance to the
-            Cisco InterfaceTopN Extention MIB."
-        MODULE  -- this module
-
-        MANDATORY-GROUPS { ciscoIfTopNExtCapsGroup }
-
-        GROUP ciscoIfTopNExtControlGroup
-        DESCRIPTION
-                "This group is mandatory for systems which support
-                the supplemental parameters for the 
-                interfaceTopNControlTable."
-
-        GROUP ciscoIfTopNExtCtrlVlanGroup
-        DESCRIPTION
-                "This group is mandatory for systems which support
-                the supplemental vlan parameters for the 
-                interfaceTopNControlTable."
-
-      ::= { ciscoIfTopNExtMIBCompliances 1 }
+    STATUS          current
+    DESCRIPTION
+        "Describes the requirements for conformance to the
+        Cisco InterfaceTopN Extention MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS { ciscoIfTopNExtCapsGroup }
+
+    GROUP           ciscoIfTopNExtControlGroup
+    DESCRIPTION
+        "This group is mandatory for systems which support
+        the supplemental parameters for the 
+        interfaceTopNControlTable."
+
+    GROUP           ciscoIfTopNExtCtrlVlanGroup
+    DESCRIPTION
+        "This group is mandatory for systems which support
+        the supplemental vlan parameters for the 
+        interfaceTopNControlTable."
+    ::= { ciscoIfTopNExtMIBCompliances 1 }
 
 -- Units of Conformance
 
 ciscoIfTopNExtCapsGroup OBJECT-GROUP
-    OBJECTS {
-             citneInterfaceTopNCaps
-            }
-    STATUS  current
-    DESCRIPTION
-            "A collection of objects providing capability information 
-            about supplemental counter type supported by the system."
+    OBJECTS         { citneInterfaceTopNCaps }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing capability information
+        about supplemental counter type supported by the system."
     ::= { ciscoIfTopNExtMIBGroups 1 }
 
 ciscoIfTopNExtControlGroup OBJECT-GROUP
-    OBJECTS {
-             citneInterfaceTopNCounterType,
-             citneInterfaceTopNInterfaceType
-            }
-    STATUS  current
-    DESCRIPTION
-            "A collection of objects providing information about
-            supplemental parameters for the 
-            interfaceTopNControlTable."
+    OBJECTS         {
+                        citneInterfaceTopNCounterType,
+                        citneInterfaceTopNInterfaceType
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information about
+        supplemental parameters for the 
+        interfaceTopNControlTable."
     ::= { ciscoIfTopNExtMIBGroups 2 }
 
 ciscoIfTopNExtCtrlVlanGroup OBJECT-GROUP
-    OBJECTS {
-             citneInterfaceTopNVlanNumber
-            }
-    STATUS  current
-    DESCRIPTION
-            "A collection of objects providing information about
-            supplemental vlan parameters for the
-            interfaceTopNControlTable."
+    OBJECTS         { citneInterfaceTopNVlanNumber }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information about
+        supplemental vlan parameters for the
+        interfaceTopNControlTable."
     ::= { ciscoIfTopNExtMIBGroups 3 }
 
 END
 
+
+