Learn how easy it is to sync an existing GitHub or Google Code repo to a SourceForge project! See Demo

Close

[e995bb]: cisco / CISCO-ENTITY-FRU-CONTROL-MIB.my Maximize Restore History

Download this file

CISCO-ENTITY-FRU-CONTROL-MIB.my    3158 lines (2653 with data), 107.5 kB

-- *****************************************************************
-- CISCO-ENTITY-FRU-CONTROL-MIB
--   
-- October 2002, Srini Kode
--   
--   
-- Copyright (c) 1998-2008, 2010-2011 by cisco Systems Inc.
-- All rights reserved.
-- ****************************************************************

CISCO-ENTITY-FRU-CONTROL-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,
    Unsigned32,
    Integer32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    TEXTUAL-CONVENTION,
    DisplayString,
    TimeStamp,
    TruthValue
        FROM SNMPv2-TC
    entPhysicalIndex,
    entPhysicalContainedIn,
    entPhysicalModelName,
    entPhysicalClass,
    entPhysicalVendorType,
    entPhysicalName
        FROM ENTITY-MIB
    InetAddressType,
    InetAddress
        FROM INET-ADDRESS-MIB
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    ciscoMgmt
        FROM CISCO-SMI;


ciscoEntityFRUControlMIB MODULE-IDENTITY
    LAST-UPDATED    "201112220000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Postal: Cisco Systems, Inc.
            170 West Tasman Drive
            San Jose, CA 95134-1706
            USA

            Tel: +1 408 526 4000

            E-mail: cs-snmp@cisco.com"
    DESCRIPTION
        "The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitor
        and configure operational status of 
        Field Replaceable Units (FRUs) and other managable 
        physical entities of the system listed in the 
        Entity-MIB (RFC 2737) entPhysicalTable. 

        FRUs include assemblies such as power supplies, fans, 
        processor modules, interface modules, etc."
    REVISION        "201112220000Z"
    DESCRIPTION
        "Added new enumeration value mdr(24) to
        ModuleOperType Textual Convention."
    REVISION        "201103180000Z"
    DESCRIPTION
        "Added FRUCoolingUnit Textual Convention.
        Added psRedundantSingleInput(7) to Textual
        Convention PowerRedundancyType.

        Added the following groups:
            cefcFRUPowerRealTimeStatusGroup
            cefcFRUPowerCapabilityGroup
            cefcFRUCoolingUnitGroup
            cefcFRUFanCoolingUnitGroup

        Deprecated cefcCoolingGroup and replaced with
        cefcCoolingGroup2 and cefcFanCoolingGroup."
    REVISION        "201012100000Z"
    DESCRIPTION
        "Added cefcMIBModuleLocalSwitchingGroup."
    REVISION        "200810080000Z"
    DESCRIPTION
        "Added two new enumeration values
        upgrading(22) and okButAuthFailed(23) to
        ModuleOperType Textual Convention."
    REVISION        "200706210000Z"
    DESCRIPTION
        "* Added two new enumeration values :
        psRedundant(5) and inPwrSrcRedundant(6) to 
        PowerRedundancyType Textual Convention."
    REVISION        "200703140000Z"
    DESCRIPTION
        "* Added cefcTotalDrawnInlineCurrent and
        cefcMIBInLinePowerCurrentGroup.
        * Added cefcPowerNonRedundantReason and 
        cefcMIBPowerRedundancyInfoGroup. 
        * Added cefcFanCoolingCapTable and 
        cefcFanCoolingCapGroup.
        * Added cefcMIBPowerCompliance8."
    REVISION        "200606230000Z"
    DESCRIPTION
        "* Added new value 'onButInlinePowerFail(12)' to PowerOperType."
    REVISION        "200509060000Z"
    DESCRIPTION
        "* Added cefcPowerCapacityGroup,
        cefcCoolingGroup and cefcConnectorRatingGroup.
        * Added new enumerator 'powerCycle' to the TC 
        PowerAdminType. 
        * Added two new enumerators 'offCooling'
        and 'offConnectorRating' to the TC PowerOperType.
        * Added cefcMIBNotificationEnablesGroup2 
        and cefcMgmtNotificationsGroup3."
    REVISION        "200412090000Z"
    DESCRIPTION
        "Removed the additional varbind 'entPhysicalDescr' added
        in 'cefcFRUInserted' & 'cefcFRURemoved' notifications."
    REVISION        "200410190000Z"
    DESCRIPTION
        "* Added the enumeration 'syncInProgress' to
        ModuleOperType Textual Convention.
        Added an additional varbind 'entPhysicalDescr' in
        'cefcFRUInserted' & 'cefcFRURemoved' notifications."
    REVISION        "200311240000Z"
    DESCRIPTION
        "* Added the enumerations okButPowerOverWarning
        and okButPowerOverCritical to ModuleOperType
        Textual Convention."
    REVISION        "200310270000Z"
    DESCRIPTION
        "Added poweredDown,poweredUp, powerDenied,powerCycled
        to ModuleOperType."
    REVISION        "200310230000Z"
    DESCRIPTION
        "* Added cefcModuleStateChangeReasonDescr and
        cefcModuleUpTime in the cefcModuleTable.
        * Added cefcIntelliModuleTable to provide the
        IP address information for intelligent
        modules."
    REVISION        "200307220000Z"
    DESCRIPTION
        "* Modified the description for cefcPowerRedudancyMode to
        indicate that this object reflects the administrative
        power supply redundancy mode.
        * Added cefcPowerRedundancyOperMode to reflect the 
        operational status of the power supply redundancy mode.
        * Deprecated cefcMaxDefaultInLinePower and added
        cefcMaxDefaultHighInLinePower to replace it.
        * Modified the DESCRIPTION for cefcFanTrayStatusTable
        and cefcFanTrayStatusEntry to reflect the right 
        situation."
    REVISION        "200210160000Z"
    DESCRIPTION
        "Added:
        * Added cefcFanTrayStatusChange notification
        * Added cefcFanTrayStatusChange to 
          cefcMgmtNotificationsGroup2"
    REVISION        "200210030000Z"
    DESCRIPTION
        "Added:
        * cefcFanTrayStatus table containing fan tray status 
          information.
        * added cefcPhysical table containing status information
          of the physical entity.
        * added cefcUnrecognizedFRU notification.
        * added cefcMIBFanTrayStatusGroup.
        * added cefcMIBPhysicalGroup."
    REVISION        "200209150000Z"
    DESCRIPTION
        "Added:
        * powerSupplyValue table containing information such 
          as, total and used inline and data power, for variable 
          power supplies.

        * added following object group
          cefcMIBPowerFRUValueGroup"
    REVISION        "200207120000Z"
    DESCRIPTION
        "Added:
        cefcModuleLastClearConfigTime  
        cefcModuleResetReasonDescription
        cefcModuleGroupRev1
        Modified:
        Added enumerations watchDogTimeoutReset,
        resourceOverflowReset, missingTaskReset,
        lowVoltageReset, controllerReset, systemReset,
        switchoverReset, upgradeReset, downgradeReset,
        cacheErrorReset, deviceDriverReset, 
        softwareExceptionReset, restoreConfigReset,
        abortRevReset, burnBootReset,
        standbyCdHealthierReset, nonNativeConfigClearReset,
        and memoryProtectionErrorReset to 
        ModuleResetReasonType TC."
    REVISION        "200105220000Z"
    DESCRIPTION
        "Modified the description for cefcTotalAvailableCurrent.
        Changed 'cefcPowerRedundancy' in the description to
        'cefcPowerRedundancyMode'
        Also made the file conform to the 72 char line limit.
        Imported NOTIFICATION-GROUP
        Added cefcMgmtNotificationsGroup."
    REVISION        "200001130000Z"
    DESCRIPTION
        "Following changes are made in this revision

        * added following enumerations to ModuleOperType TC:
          dormant, outOfServiceAdmin, outOfServiceEnvTemp

        * added outOfServiceAdmin to ModuleAdminType TC

        * added following notifications:
          cefcMIBNotificationEnables
          cefcMIBEnableStatusNotification
          cefcPowerStatusChange
          cefcFRUInserted
          cefcFRURemoved

        * added following object groups:
          cefcMIBInLinePowerControlGroup
          cefcMIBNotificationEnablesGroup"
    REVISION        "9904050000Z"
    DESCRIPTION
        "Added module table containing the status information."
    ::= { ciscoMgmt 117 }


cefcMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoEntityFRUControlMIB 1 }

cefcFRUMIBNotificationPrefix  OBJECT IDENTIFIER
    ::= { ciscoEntityFRUControlMIB 2 }

cefcMIBConformance  OBJECT IDENTIFIER
    ::= { ciscoEntityFRUControlMIB 3 }


-- textual conventions

PowerRedundancyType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "power supply redundancy modes.  valid values are:

        notsupported(1): Read-only operational state, indicates
            that the requested administrative state (redundant(2),
            combined(3), psRedundant(5), inPwrSrcRedundant(6)
            or psRedundantSingleInput(7)) is not supported
            by the system.

        redundant(2): A single power supply output can power
            the entire system, although there are more than
            one matched supply in the system.

            In the systems which support multiple level of
            redundancy, such as input power redundancy, this
            state indicates that redundancy is enabled on
            all levels.

        combined(3): The combined output of the power supplies
            are available to operate the system when there are
            more than one matched power supply in the system.

            In the platforms which support multiple level of
            redundancy, such as input redundancy, this state
            indicates that no redundancy on all levels.

        nonRedundant(4): Read-only operational state, indicates
            that there is only one power supply or there are
            unmatched power supplies in the system.

        psRedundant(5): Only the power output redundancy
            is enabled in the systems which support multiple
            levels of redundancy.  All other types of redundancy,
            such as input power redundancy, are disabled.

            This value is only supported by the systems which
            support multiple levels of redundancy.

        inPwrSrcRedundant(6): Only the input power redundancy
            is enabled in the systems which support multiple
            levels of redundancy.  All other types of redundancy,
            such as output power redundancy, are disabled.

            This value is only supported by the systems which
            support input power redundancy.

         psRedundantSingleInput(7): Only the power redundancy with
            single input is enabled in the systems which support
            multiple levels of redundancy.  All other types of
            redundancy, such as output power redundancy, are disabled.

            This value is only supported by the systems which
            support power redundancy with single input."
    SYNTAX          INTEGER  {
                        notsupported(1),
                        redundant(2),
                        combined(3),
                        nonRedundant(4),
                        psRedundant(5),
                        inPwrSrcRedundant(6),
                        psRedundantSingleInput(7)
                    }

PowerAdminType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Administratively desired FRU power state types.  valid values
        are:
        on(1):  Turn FRU on.
        off(2): Turn FRU off.

        The inline power means that the FRU itself won't cost any power,
        but the external device connecting to the FRU will drain the
        power from FRU.  For example, the IP phone device.  The FRU is a
        port of a switch with voice ability and IP phone will cost power
        from the port once it connects to the port.

        inlineAuto(3): Turn FRU inline power to auto mode. It means that
        the FRU will try to detect whether the connecting device needs
        power or not.  If it needs power, the FRU will supply power.  If
        it doesn't, the FRU will treat the device as a regular network
        device.

        inlineOn(4): Turn FRU inline power to on mode.  It means that
        once the device connects to the FRU, the FRU will always supply
        power to the device no matter the device needs the power or not.

        powerCycle(5): Power cycle the FRU.  This value may be specified
        in a management protocol set operation, it will not be returned 
        in response to a management protocol retrieval operation."
    SYNTAX          INTEGER  {
                        on(1),
                        off(2),
                        inlineAuto(3),
                        inlineOn(4),
                        powerCycle(5)
                    }

PowerOperType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Operational FRU Status types.  valid values are:

        offEnvOther(1)   FRU is powered off because of a problem not
                         listed below.

        on(2):           FRU is powered on.

        offAdmin(3):     Administratively off.

        offDenied(4):    FRU is powered off because available
                         system power is insufficient.

        offEnvPower(5):  FRU is powered off because of power problem in
                         the FRU.  for example, the FRU's power
                         translation (DC-DC converter) or distribution
                         failed.

        offEnvTemp(6):   FRU is powered off because of temperature
                         problem.

        offEnvFan(7):    FRU is powered off because of fan problems.

        failed(8):       FRU is in failed state. 

        onButFanFail(9): FRU is on, but fan has failed.

        offCooling(10):  FRU is powered off because of the system's 
                         insufficient cooling capacity.

        offConnectorRating(11): FRU is powered off because of the 
                                system's connector rating exceeded.

        onButInlinePowerFail(12): The FRU on, but no inline power
                                  is being delivered as the
                                  data/inline power component of the
                                  FRU has failed."
    SYNTAX          INTEGER  {
                        offEnvOther(1),
                        on(2),
                        offAdmin(3),
                        offDenied(4),
                        offEnvPower(5),
                        offEnvTemp(6),
                        offEnvFan(7),
                        failed(8),
                        onButFanFail(9),
                        offCooling(10),
                        offConnectorRating(11),
                        onButInlinePowerFail(12)
                    }

FRUCurrentType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "a current measurement, on the system power supply
        primary output, expressed in cefcPowerUnits.  Range is 
        from negative 1 million to positive one million
        amperes.  

        A negative value expresses current used by the FRU.
        A positive value expresses current supplied by the FRU."
    SYNTAX          Integer32 (-1000000000..1000000000)

ModuleAdminType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Administratively desired module states.  Valid values are:

        enabled(1)     module is operational.
        disabled(2)    module is not operational.
        reset(3)       module is reset. This value may be specified
                       in a management protocol set operation, it will
                       not be returned in response to a management 
                       protocol retrieval operation. 
        outOfServiceAdmin(4)   module is powered on but out of 
                               service, set by CLI."
    SYNTAX          INTEGER  {
                        enabled(1),
                        disabled(2),
                        reset(3),
                        outOfServiceAdmin(4)
                    }

ModuleOperType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Operational module states.  Valid values are :

        unknown(1)           Module is not in one of other states

         normal operational states:

        ok(2)                 Module is operational.

        disabled(3)           Module is administratively disabled.

        okButDiagFailed(4)    Module is operational but there is some
                             diagnostic information available.

         transitional states:

        boot(5)               Module is currently in the process of
                             bringing up image.  After boot, it starts
                             its operational software and transitions
                             to the appropriate state.

        selfTest(6)           Module is performing selfTest.


         failure states:

        failed(7)              Module has failed due to some condition
                              not stated above.

        missing(8)             Module has been provisioned, but it is
                              missing

        mismatchWithParent(9)  Module is not compatible with parent
                              entity. Module has not been provisioned
                              and wrong type of module is plugged in.
                              This state can be cleared by plugging
                              in the appropriate module.

        mismatchConfig(10)     Module is not compatible with the
        current
                              configuration. Module was correctly
                              provisioned earlier, however the module
                              was replaced by an incompatible module.
                              This state can be resolved by clearing
                              the configuration, or replacing with the
                              appropriate module.

        diagFailed(11)         Module diagnostic test failed due to
        some
                              hardware failure.

        dormant(12)            Module is waiting for an external or
                              internal event to become operational.

        outOfServiceAdmin(13)  module is administratively set to be
                              powered on but out of service.

        outOfServiceEnvTemp(14)Module is powered on but out of service,
                              due to environmental temperature problem.
                              An out-o-service module consumes less
                              power thus will cool down the board.

        poweredDown(15)       Module is in powered down state.

        poweredUp(16)         Module is in powered up state.

        powerDenied(17)       System does not have enough power in
                              power budget to power on this module.

        powerCycled(18)       Module is being power cycled.

        okButPowerOverWarning(19) Module is drawing more power than 
                              allocated to this module. The module
                              is still operational but may go into
                              a failure state. This state may be
                              caused by misconfiguration of power 
                              requirements (especially for inline 
                              power). 

        okButPowerOverCritical(20) Module is drawing more power
                              than this module is designed to 
                              handle. The module is still 
                              operational but may go into a 
                              failure state and could potentially
                              take the system down. This state
                              may be caused by gross misconfi-
                              guration of power requirements      
                              (especially for inline power). 

        syncInProgress(21)    Synchronization in progress.
                              In a high availability system there 
                              will be 2 control modules, active and 
                              standby. 
                              This transitional state specifies the
                              synchronization of data between the
                              active and standby modules.

        upgrading(22)         Module is upgrading.

        okButAuthFailed(23)   Module is operational but did not pass 
                              hardware integrity verification.

        mdr(24)               Module is undergoing a Minimum 
                              Disruptive Restart (MDR) upgrade."
    SYNTAX          INTEGER  {
                        unknown(1),
                        ok(2),
                        disabled(3),
                        okButDiagFailed(4),
                        boot(5),
                        selfTest(6),
                        failed(7),
                        missing(8),
                        mismatchWithParent(9),
                        mismatchConfig(10),
                        diagFailed(11),
                        dormant(12),
                        outOfServiceAdmin(13),
                        outOfServiceEnvTemp(14),
                        poweredDown(15),
                        poweredUp(16),
                        powerDenied(17),
                        powerCycled(18),
                        okButPowerOverWarning(19),
                        okButPowerOverCritical(20),
                        syncInProgress(21),
                        upgrading(22),
                        okButAuthFailed(23),
                        mdr(24)
                    }

ModuleResetReasonType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Describes the reason for the last module reset operation.

        unknown(1)                      source of the reset is not 
                                        identified

        powerUp(2)                      system power up operation

        parityError(3)                  parity error during system 
                                        bring up operation

        clearConfigReset(4)             reset due to clear 
                                        configuration operation

        manualReset(5)                  reset due to administrative 
                                        request

        watchDogTimeoutReset(6)         reset due to watchdog timeout

        resourceOverflowReset(7)        reset due to resource overflow

        missingTaskReset(8)             reset due to missing task

        lowVoltageReset(9)              reset due to low voltage

        controllerReset(10)             reset by controller

        systemReset(11)                 system reset

        switchoverReset(12)             reset due to user initiated 
                                        graceful switchover

        upgradeReset(13)                reset due to upgrade

        downgradeReset(14)              reset due to downgrade

        cacheErrorReset(15)             reset due to cache error

        deviceDriverReset(16)           reset due to device driver 
                                        error

        softwareExceptionReset(17)      reset due to software 
                                        exception

        restoreConfigReset(18)          reset due to configuration
                                        restoration

        abortRevReset(19)               reset due to revision change 
                                        abort

        burnBootReset(20)               reset due to boot image 
                                        change

        standbyCdHealthierReset(21)     reset to switch to healthier 
                                        standby card

        nonNativeConfigClearReset(22)   reset due clearing of 
                                        non-native configuration

        memoryProtectionErrorReset(23)  reset due to memory protection 
                                        violation."
    SYNTAX          INTEGER  {
                        unknown(1),
                        powerUp(2),
                        parityError(3),
                        clearConfigReset(4),
                        manualReset(5),
                        watchDogTimeoutReset(6),
                        resourceOverflowReset(7),
                        missingTaskReset(8),
                        lowVoltageReset(9),
                        controllerReset(10),
                        systemReset(11),
                        switchoverReset(12),
                        upgradeReset(13),
                        downgradeReset(14),
                        cacheErrorReset(15),
                        deviceDriverReset(16),
                        softwareExceptionReset(17),
                        restoreConfigReset(18),
                        abortRevReset(19),
                        burnBootReset(20),
                        standbyCdHealthierReset(21),
                        nonNativeConfigClearReset(22),
                        memoryProtectionErrorReset(23)
                    }

FRUTimeSeconds ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "This is a non-negative integer which represents
        the time in second between two epochs.

        Since time is not discrete, it is rounded up to
        the nearest second. For example, if the elapsed
        time is greater than zero and less or equal to
        one second, then one second is returned, etc.

        When objects are defined which use this type, the
        description of the object identifies both of the
        reference epochs."
    SYNTAX          Unsigned32

FRUCoolingUnit ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The unit for the cooling capacity and requirement.

        cfm(1)    Cubic feet per minute
        watts(2)  Watts"
    SYNTAX          INTEGER  {
                        cfm(1),
                        watts(2)
                    }
-- MIB variables

cefcFRUPower  OBJECT IDENTIFIER
    ::= { cefcMIBObjects 1 }

cefcModule  OBJECT IDENTIFIER
    ::= { cefcMIBObjects 2 }

cefcMIBNotificationEnables  OBJECT IDENTIFIER
    ::= { cefcMIBObjects 3 }

cefcFRUFan  OBJECT IDENTIFIER
    ::= { cefcMIBObjects 4 }

cefcPhysical  OBJECT IDENTIFIER
    ::= { cefcMIBObjects 5 }

cefcPowerCapacity  OBJECT IDENTIFIER
    ::= { cefcMIBObjects 6 }

cefcCooling  OBJECT IDENTIFIER
    ::= { cefcMIBObjects 7 }

cefcConnector  OBJECT IDENTIFIER
    ::= { cefcMIBObjects 8 }

-- cefcFRUPowerSupplyGroupTable

cefcFRUPowerSupplyGroupTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcFRUPowerSupplyGroupEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table lists the redundancy mode and the
        operational status of the power supply groups
        in the system."
    ::= { cefcFRUPower 1 }

cefcFRUPowerSupplyGroupEntry OBJECT-TYPE
    SYNTAX          CefcFRUPowerSupplyGroupEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An cefcFRUPowerSupplyGroupTable entry lists the desired
        redundancy mode, the units of the power outputs and the 
        available and drawn current for the power supply group.

        Entries are created by the agent when a power supply group
        is added to the entPhysicalTable. Entries are deleted by 
        the agent at power supply group removal."
    INDEX           { entPhysicalIndex } 
    ::= { cefcFRUPowerSupplyGroupTable 1 }

CefcFRUPowerSupplyGroupEntry ::= SEQUENCE {
        cefcPowerRedundancyMode     PowerRedundancyType,
        cefcPowerUnits              DisplayString,
        cefcTotalAvailableCurrent   FRUCurrentType,
        cefcTotalDrawnCurrent       FRUCurrentType,
        cefcPowerRedundancyOperMode PowerRedundancyType,
        cefcPowerNonRedundantReason INTEGER,
        cefcTotalDrawnInlineCurrent FRUCurrentType
}

cefcPowerRedundancyMode OBJECT-TYPE
    SYNTAX          PowerRedundancyType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The administratively desired power supply redundancy
        mode." 
    ::= { cefcFRUPowerSupplyGroupEntry 1 }

cefcPowerUnits OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The units of primary supply to interpret
        cefcTotalAvailableCurrent and cefcTotalDrawnCurrent
        as power.

        For example, one 1000-watt power supply could 
        deliver 100 amperes at 10 volts DC.  So the value
        of cefcPowerUnits would be 'at 10 volts DC'.

        cefcPowerUnits is for display purposes only." 
    ::= { cefcFRUPowerSupplyGroupEntry 2 }

cefcTotalAvailableCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Total current available for FRU usage." 
    ::= { cefcFRUPowerSupplyGroupEntry 3 }

cefcTotalDrawnCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Total current drawn by powered-on FRUs." 
    ::= { cefcFRUPowerSupplyGroupEntry 4 }

cefcPowerRedundancyOperMode OBJECT-TYPE
    SYNTAX          PowerRedundancyType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The power supply redundancy operational mode." 
    ::= { cefcFRUPowerSupplyGroupEntry 5 }

cefcPowerNonRedundantReason OBJECT-TYPE
    SYNTAX          INTEGER  {
                        notApplicable(1),
                        unknown(2),
                        singleSupply(3),
                        mismatchedSupplies(4),
                        supplyError(5)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object has the value of notApplicable(1) when
        cefcPowerRedundancyOperMode of the instance does not
        have the value of nonRedundant(4).

        The other values explain the reason why 
        cefcPowerRedundancyOperMode is nonRedundant(4), e.g.

        unknown(2)             the reason is not identified.

        singleSupply(3)        There is only one power supply
                               in the group.

        mismatchedSupplies(4)  There are more than one power
                               supplies in the groups. However
                               they are mismatched and can not
                               work redundantly.

        supplyError(5)         Some power supply or supplies
                               does or do not working properly." 
    ::= { cefcFRUPowerSupplyGroupEntry 6 }

cefcTotalDrawnInlineCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Total inline current drawn for inline operation." 
    ::= { cefcFRUPowerSupplyGroupEntry 7 }
 

-- cefcFRUPowerStatusTable

cefcFRUPowerStatusTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcFRUPowerStatusEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table lists the power-related administrative status
        and operational status of the manageable components
        in the system."
    ::= { cefcFRUPower 2 }

cefcFRUPowerStatusEntry OBJECT-TYPE
    SYNTAX          CefcFRUPowerStatusEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An cefcFRUPowerStatusTable entry lists the desired
        administrative status, the operational status of the 
        power manageable component, and the current required by 
        the component for operation.

        Entries are created by the agent at system power-up or 
        the insertion of the component.  Entries are deleted by
        the agent at the removal of the component.

        Only components with power control are listed in the 
        table."
    INDEX           { entPhysicalIndex } 
    ::= { cefcFRUPowerStatusTable 1 }

CefcFRUPowerStatusEntry ::= SEQUENCE {
        cefcFRUPowerAdminStatus PowerAdminType,
        cefcFRUPowerOperStatus  PowerOperType,
        cefcFRUCurrent          FRUCurrentType,
        cefcFRUPowerCapability  BITS,
        cefcFRURealTimeCurrent  FRUCurrentType
}

cefcFRUPowerAdminStatus OBJECT-TYPE
    SYNTAX          PowerAdminType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Administratively desired FRU power state." 
    ::= { cefcFRUPowerStatusEntry 1 }

cefcFRUPowerOperStatus OBJECT-TYPE
    SYNTAX          PowerOperType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Operational FRU power state." 
    ::= { cefcFRUPowerStatusEntry 2 }

cefcFRUCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Current supplied by the FRU (positive values)
        or current required to operate the FRU (negative values)." 
    ::= { cefcFRUPowerStatusEntry 3 }

cefcFRUPowerCapability OBJECT-TYPE
    SYNTAX          BITS {
                        realTimeCurrent(0)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the set of supported power capabilities
        of the FRU.

        realTimeCurrent(0) -
            cefcFRURealTimeCurrent is supported by the FRU." 
    ::= { cefcFRUPowerStatusEntry 4 }

cefcFRURealTimeCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the realtime value of current supplied
        by the FRU (positive values) or the realtime value of current
        drawn by the FRU (negative values)." 
    ::= { cefcFRUPowerStatusEntry 5 }
 


-- cefcMaxDefaultInLinePower

cefcMaxDefaultInLinePower OBJECT-TYPE
    SYNTAX          Integer32 (0..12500)
    UNITS           "miliwatts"
    MAX-ACCESS      read-write
    STATUS          deprecated
    DESCRIPTION
        "The system will provide power to the device connecting
        to the FRU if the device needs power, like an IP Phone.
        We call the providing power inline power.

        This MIB object controls the maximum default inline power
        for the device connecting to the FRU in the system. If the
        maximum default inline power of the device is greater than
        the maximum value reportable by this object, then this
        object should report its maximum reportable value (12500)
        and cefcMaxDefaultHighInLinePower must be used to report
        the actual maximum default inline power."
    DEFVAL          { 12500 } 
    ::= { cefcFRUPower 3 }
-- cefcFRUPowerSupplyValueTable

cefcFRUPowerSupplyValueTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcFRUPowerSupplyValueEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table lists the power capacity of a power FRU in the
        system if it provides variable power. Power supplies usually
        provide either system or inline power. They cannot be 
        controlled by software to dictate how they distribute power.
        We can also have what are known as variable power supplies.
        They can provide both system and inline power and can be 
        varied within hardware defined ranges for system and inline
        limited by a total maximum combined output. They could be
        configured by the user via CLI or SNMP or be controlled by
        software internally.
        This table supplements the information in the
        cefcFRUPowerStatusTable for power supply FRUs. The 
        cefcFRUCurrent attribute in that table provides the overall
        current the power supply FRU can provide while this table 
        gives us the individual contribution towards system and 
        inline power."
    ::= { cefcFRUPower 4 }

cefcFRUPowerSupplyValueEntry OBJECT-TYPE
    SYNTAX          CefcFRUPowerSupplyValueEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An cefcFRUPowerSupplyValueTable entry lists the current
        provided by the FRU for operation.

        Entries are created by the agent at system power-up or 
        FRU insertion.  Entries are deleted by the agent at FRU
        removal.

        Only power supply FRUs are listed in the table."
    INDEX           { entPhysicalIndex } 
    ::= { cefcFRUPowerSupplyValueTable 1 }

CefcFRUPowerSupplyValueEntry ::= SEQUENCE {
        cefcFRUTotalSystemCurrent FRUCurrentType,
        cefcFRUDrawnSystemCurrent FRUCurrentType,
        cefcFRUTotalInlineCurrent FRUCurrentType,
        cefcFRUDrawnInlineCurrent FRUCurrentType
}

cefcFRUTotalSystemCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Total current that could be supplied by the FRU (positive
        values) for system operations." 
    ::= { cefcFRUPowerSupplyValueEntry 1 }

cefcFRUDrawnSystemCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Amount of current drawn by the FRU's in the system towards
        system operations from this FRU" 
    ::= { cefcFRUPowerSupplyValueEntry 2 }

cefcFRUTotalInlineCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Total current supplied by the FRU (positive values) for
        inline operations." 
    ::= { cefcFRUPowerSupplyValueEntry 3 }

cefcFRUDrawnInlineCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Amount of current that is being drawn from this FRU for inline
        operation." 
    ::= { cefcFRUPowerSupplyValueEntry 4 }
 


cefcMaxDefaultHighInLinePower OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "miliwatts"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The system will provide power to the device connecting
        to the FRU if the device needs power, like an IP Phone.
        We call the providing power inline power.

        This MIB object controls the maximum default inline power
        for the device connecting to the FRU in the system." 
    ::= { cefcFRUPower 5 }
-- cefcModuleTable

cefcModuleTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcModuleEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcModuleTable entry lists the operational and
        administrative status information for ENTITY-MIB
        entPhysicalTable entries for manageable components
        of type PhysicalClass module(9)."
    ::= { cefcModule 1 }

cefcModuleEntry OBJECT-TYPE
    SYNTAX          CefcModuleEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcModuleStatusTable entry lists the operational and
        administrative status information for ENTITY-MIB
        entPhysicalTable entries for manageable components 
        of type PhysicalClass module(9).

        Entries are created by the agent at the system power-up or
        module insertion.

        Entries are deleted by the agent upon module removal."
    INDEX           { entPhysicalIndex } 
    ::= { cefcModuleTable 1 }

CefcModuleEntry ::= SEQUENCE {
        cefcModuleAdminStatus            ModuleAdminType,
        cefcModuleOperStatus             ModuleOperType,
        cefcModuleResetReason            ModuleResetReasonType,
        cefcModuleStatusLastChangeTime   TimeStamp,
        cefcModuleLastClearConfigTime    TimeStamp,
        cefcModuleResetReasonDescription DisplayString,
        cefcModuleStateChangeReasonDescr DisplayString,
        cefcModuleUpTime                 FRUTimeSeconds
}

cefcModuleAdminStatus OBJECT-TYPE
    SYNTAX          ModuleAdminType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object provides administrative control of the
        module." 
    ::= { cefcModuleEntry 1 }

cefcModuleOperStatus OBJECT-TYPE
    SYNTAX          ModuleOperType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object shows the module's operational state." 
    ::= { cefcModuleEntry 2 }

cefcModuleResetReason OBJECT-TYPE
    SYNTAX          ModuleResetReasonType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object identifies the reason for the last reset performed
        on the module." 
    ::= { cefcModuleEntry 3 }

cefcModuleStatusLastChangeTime OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The value of sysUpTime at the time the cefcModuleOperStatus
        is changed." 
    ::= { cefcModuleEntry 4 }

cefcModuleLastClearConfigTime OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The value of sysUpTime when the
        configuration was most recently cleared." 
    ::= { cefcModuleEntry 5 }

cefcModuleResetReasonDescription OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "A description qualifying the module reset reason
        specified in cefcModuleResetReason. 

        Examples:
          command xyz              
          missing task
          switch over
          watchdog timeout    
          etc.

        cefcModuleResetReasonDescription is for display purposes only.
        NMS applications must not parse." 
    ::= { cefcModuleEntry 6 }

cefcModuleStateChangeReasonDescr OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object displays human-readable textual string which
        describes the cause of the last state change of the
        module. This object contains zero length string
        if no meaningful reason could be provided.

        Examples:
        'Invalid software version'
        'Software download failed'
        'Software version mismatch'
        'Module is in standby state'
        etc.

        This object is for display purposes only.
        NMS applications must not parse this object
        and take any decision based on its value." 
    ::= { cefcModuleEntry 7 }

cefcModuleUpTime OBJECT-TYPE
    SYNTAX          FRUTimeSeconds
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object provides the up time for the module
        since it was last re-initialized.

        This object is not persistent; if a module reset,
        restart, power off, the up time starts from zero." 
    ::= { cefcModuleEntry 8 }
 

-- cefcIntelliModuleTable

cefcIntelliModuleTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcIntelliModuleEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table sparsely augments the
        cefcModuleTable (i.e., every row in
        this table corresponds to a row in
        the cefcModuleTable but not necessarily
        vice-versa).

        A cefcIntelliModuleTable entry lists the
        information specific to intelligent
        modules which cannot be provided by the
        cefcModuleTable."
    ::= { cefcModule 2 }

cefcIntelliModuleEntry OBJECT-TYPE
    SYNTAX          CefcIntelliModuleEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcIntelliModuleTable entry lists the
        information specific to an intelligent
        module which cannot be provided by
        this module's corresponding instance in
        the cefcModuleTable. Only an intelligent
        module with Internet address configured has
        its entry here.

        An entry of this table is created if an 
        intelligent module is detected by the 
        managed system and its management Internet
        address is configured on the intelligent 
        module.

        An entry of this table is deleted if the 
        removal of Internet address configuration of 
        this module or the module itself."
    INDEX           { entPhysicalIndex } 
    ::= { cefcIntelliModuleTable 1 }

CefcIntelliModuleEntry ::= SEQUENCE {
        cefcIntelliModuleIPAddrType InetAddressType,
        cefcIntelliModuleIPAddr     InetAddress
}

cefcIntelliModuleIPAddrType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The type of Internet address by which the
        intelligent module is reachable." 
    ::= { cefcIntelliModuleEntry 1 }

cefcIntelliModuleIPAddr OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The Internet address configured
        for the intelligent module.
        The type of this address is 
        determined by the value of the object 
        cefcIntelliModuleIPAddrType." 
    ::= { cefcIntelliModuleEntry 2 }
 


cefcModuleLocalSwitchingTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcModuleLocalSwitchingEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table sparsely augments the cefcModuleTable
        (i.e., every row in this table corresponds to a row in
        the cefcModuleTable but not necessarily vice-versa).

        A cefcModuleLocalSwitchingTable entry lists the
        information specific to local switching capable
        modules which cannot be provided by the
        cefcModuleTable."
    ::= { cefcModule 3 }

cefcModuleLocalSwitchingEntry OBJECT-TYPE
    SYNTAX          CefcModuleLocalSwitchingEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcModuleLocalSwitchingTable entry lists the
        information specific to a local switching capable
        module which cannot be provided by this module's
        corresponding instance in the cefcModuleTable.
        Only a module which is capable of local switching
        has its entry here.

        An entry of this table is created if a module which
        is capable of local switching is detected by the
        managed system.

        An entry of this table is deleted if the
        removal of this module."
    INDEX           { entPhysicalIndex } 
    ::= { cefcModuleLocalSwitchingTable 1 }

CefcModuleLocalSwitchingEntry ::= SEQUENCE {
        cefcModuleLocalSwitchingMode INTEGER
}

cefcModuleLocalSwitchingMode OBJECT-TYPE
    SYNTAX          INTEGER  {
                        enabled(1),
                        disabled(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the mode of local switching.

        enabled(1)  - local switching is enabled.
        disabled(2) - local switching is disabled." 
    ::= { cefcModuleLocalSwitchingEntry 1 }
 

-- cefcFanTrayStatusTable

cefcFanTrayStatusTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcFanTrayStatusEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains the operational status information
        for all ENTITY-MIB entPhysicalTable entries which have 
        an entPhysicalClass of 'fan'; specifically, all  
        entPhysicalTable entries which represent either: one 
        physical fan, or a single physical 'fan tray' which is a
        manufactured (inseparable in the field) combination of 
        multiple fans."
    ::= { cefcFRUFan 1 }

cefcFanTrayStatusEntry OBJECT-TYPE
    SYNTAX          CefcFanTrayStatusEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An cefcFanTrayStatusTable entry lists the operational
        status information for the ENTITY-MIB entPhysicalTable 
        entry which is identified by the value of entPhysicalIndex.
        The value of entPhysicalClass for the identified entry will
        be 'fan', and the represented physical entity will be 
        either: one physical fan, or a single physical 'fan tray' 
        which is a manufactured (inseparable in the field) 
        combination of multiple fans.

        Entries are created by the agent at system power-up or 
        fan or fan tray insertion.  Entries are deleted 
        by the agent at the fan or fan tray removal."
    INDEX           { entPhysicalIndex } 
    ::= { cefcFanTrayStatusTable 1 }

CefcFanTrayStatusEntry ::= SEQUENCE {
        cefcFanTrayOperStatus INTEGER
}

cefcFanTrayOperStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        unknown(1),
                        up(2),
                        down(3),
                        warning(4)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The operational state of the fan or fan tray.
        unknown(1) - unknown.
        up(2) - powered on.
        down(3) - powered down.
        warning(4) - partial failure, needs replacement 
                     as soon as possible." 
    ::= { cefcFanTrayStatusEntry 1 }
 

-- cefcPhysicalTable

cefcPhysicalTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcPhysicalEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains one row per physical entity."
    ::= { cefcPhysical 1 }

cefcPhysicalEntry OBJECT-TYPE
    SYNTAX          CefcPhysicalEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Information about a particular physical entity."
    INDEX           { entPhysicalIndex } 
    ::= { cefcPhysicalTable 1 }

CefcPhysicalEntry ::= SEQUENCE {
        cefcPhysicalStatus INTEGER
}

cefcPhysicalStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        other(1),
                        supported(2),
                        unsupported(3),
                        incompatible(4)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The status of this physical entity.
        other(1) - the status is not any of the listed below.
        supported(2) - this entity is supported.
        unsupported(3) - this entity is unsupported.
        incompatible(4) - this entity is incompatible.
        It would be unsupported(3), if the ID read from Serial
        EPROM is not supported. It would be incompatible(4), if
        in the present configuration this FRU is not supported." 
    ::= { cefcPhysicalEntry 1 }
 

-- Power supply capacity

cefcPowerSupplyInputTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcPowerSupplyInputEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains the power input information
        for all the power supplies that have entPhysicalTable
        entries with 'powerSupply' in the entPhysicalClass. 

        The entries are created by the agent at the system
        power-up or power supply insertion.

        Entries are deleted by the agent upon power supply
        removal.

        The number of entries is determined by the number of
        power supplies and number of power inputs on the power 
        supply."
    ::= { cefcPowerCapacity 1 }

cefcPowerSupplyInputEntry OBJECT-TYPE
    SYNTAX          CefcPowerSupplyInputEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry containing power input management information
        applicable to a particular power supply and input."
    INDEX           {
                        entPhysicalIndex,
                        cefcPowerSupplyInputIndex
                    } 
    ::= { cefcPowerSupplyInputTable 1 }

CefcPowerSupplyInputEntry ::= SEQUENCE {
        cefcPowerSupplyInputIndex Unsigned32,
        cefcPowerSupplyInputType  INTEGER
}

cefcPowerSupplyInputIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A unique value, greater than zero, for each input on
        a power supply." 
    ::= { cefcPowerSupplyInputEntry 1 }

cefcPowerSupplyInputType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        unknown(1),
                        acLow(2),
                        acHigh(3),
                        dcLow(4),
                        dcHigh(5)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The type of an input power detected on the power
        supply.

        unknown(1): No input power is detected.

        acLow(2): Lower rating AC input power is detected.

        acHigh(3): Higher rating AC input power is detected.

        dcLow(4): Lower rating DC input power is detected.

        dcHigh(5): Higher rating DC input power is detected." 
    ::= { cefcPowerSupplyInputEntry 2 }
 


cefcPowerSupplyOutputTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcPowerSupplyOutputEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains a list of possible output
        mode for the power supplies, whose ENTITY-MIB
        entPhysicalTable entries have an entPhysicalClass
        of 'powerSupply'. It also indicate which mode
        is the operational mode within the system."
    ::= { cefcPowerCapacity 2 }

cefcPowerSupplyOutputEntry OBJECT-TYPE
    SYNTAX          CefcPowerSupplyOutputEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcPowerSupplyOutputTable entry lists the
        power output capacity and its operational status
        for manageable components of type PhysicalClass
        'powerSupply'.

        Entries are created by the agent at the system
        power-up or power supply insertion.

        Entries are deleted by the agent upon power supply
        removal.

        The number of entries of a power supply is determined
        by the power supply."
    INDEX           {
                        entPhysicalIndex,
                        cefcPSOutputModeIndex
                    } 
    ::= { cefcPowerSupplyOutputTable 1 }

CefcPowerSupplyOutputEntry ::= SEQUENCE {
        cefcPSOutputModeIndex       Unsigned32,
        cefcPSOutputModeCurrent     FRUCurrentType,
        cefcPSOutputModeInOperation TruthValue
}

cefcPSOutputModeIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A unique value, greater than zero, for each
        possible output mode on a power supply." 
    ::= { cefcPowerSupplyOutputEntry 1 }

cefcPSOutputModeCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The output capacity of the power supply." 
    ::= { cefcPowerSupplyOutputEntry 2 }

cefcPSOutputModeInOperation OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "A value of 'true' indicates that this mode is the
        operational mode of the power supply output
        capacity.

        A value of 'false' indicates that this mode is not
        the operational mode of the power supply output
        capacity.

        For a given power supply's entPhysicalIndex, 
        at most one instance of this object can have the
        value of true(1)." 
    ::= { cefcPowerSupplyOutputEntry 3 }
 

-- Chassis cooling management

cefcChassisCoolingTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcChassisCoolingEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains the cooling capacity
        information of the chassis whose ENTITY-MIB
        entPhysicalTable entries have an
        entPhysicalClass of 'chassis'."
    ::= { cefcCooling 1 }

cefcChassisCoolingEntry OBJECT-TYPE
    SYNTAX          CefcChassisCoolingEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcChassisCoolingEntry lists the maximum
        cooling capacity that could be provided 
        for one slot on the manageable components of type
        PhysicalClass 'chassis'.

        Entries are created by the agent if the corresponding
        entry is created in ENTITY-MIB entPhysicalTable.

        Entries are deleted by the agent if the corresponding
        entry is deleted in ENTITY-MIB entPhysicalTable."
    INDEX           { entPhysicalIndex } 
    ::= { cefcChassisCoolingTable 1 }

CefcChassisCoolingEntry ::= SEQUENCE {
        cefcChassisPerSlotCoolingCap  Unsigned32,
        cefcChassisPerSlotCoolingUnit FRUCoolingUnit
}

cefcChassisPerSlotCoolingCap OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The maximum cooling capacity that could be provided
        for any slot in this chassis.

        The default unit of the cooling capacity is 'cfm', if
        cefcChassisPerSlotCoolingUnit is not supported." 
    ::= { cefcChassisCoolingEntry 1 }

cefcChassisPerSlotCoolingUnit OBJECT-TYPE
    SYNTAX          FRUCoolingUnit
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The unit of the maximum cooling capacity for any slot
        in this chassis." 
    ::= { cefcChassisCoolingEntry 2 }
 


cefcFanCoolingTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcFanCoolingEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains the cooling capacity
        information of the fans whose ENTITY-MIB
        entPhysicalTable entries have an
        entPhysicalClass of 'fan'."
    ::= { cefcCooling 2 }

cefcFanCoolingEntry OBJECT-TYPE
    SYNTAX          CefcFanCoolingEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcFanCoolingEntry lists the cooling
        capacity that is provided by the 
        manageable components of type PhysicalClass 
        'fan'.

        Entries are created by the agent if the corresponding
        entry is created in ENTITY-MIB entPhysicalTable.

        Entries are deleted by the agent if the corresponding
        entry is deleted in ENTITY-MIB entPhysicalTable."
    INDEX           { entPhysicalIndex } 
    ::= { cefcFanCoolingTable 1 }

CefcFanCoolingEntry ::= SEQUENCE {
        cefcFanCoolingCapacity     Unsigned32,
        cefcFanCoolingCapacityUnit FRUCoolingUnit
}

cefcFanCoolingCapacity OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The cooling capacity that is provided by this fan.

        The default unit of the fan cooling capacity is 'cfm',
        if cefcFanCoolingCapacityUnit is not supported." 
    ::= { cefcFanCoolingEntry 1 }

cefcFanCoolingCapacityUnit OBJECT-TYPE
    SYNTAX          FRUCoolingUnit
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The unit of the fan cooling capacity." 
    ::= { cefcFanCoolingEntry 2 }
 


cefcModuleCoolingTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcModuleCoolingEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains the cooling requirement for
        all the manageable components of type entPhysicalClass
        'module'."
    ::= { cefcCooling 3 }

cefcModuleCoolingEntry OBJECT-TYPE
    SYNTAX          CefcModuleCoolingEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcModuleCoolingEntry lists the cooling
        requirement for a manageable components of type
        entPhysicalClass 'module'.

        Entries are created by the agent at the system
        power-up or module insertion.

        Entries are deleted by the agent upon module
        removal."
    INDEX           { entPhysicalIndex } 
    ::= { cefcModuleCoolingTable 1 }

CefcModuleCoolingEntry ::= SEQUENCE {
        cefcModuleCooling     Unsigned32,
        cefcModuleCoolingUnit FRUCoolingUnit
}

cefcModuleCooling OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The cooling requirement of the module and its daughter
        cards.

        The default unit of the module cooling requirement is
        'cfm', if cefcModuleCoolingUnit is not supported." 
    ::= { cefcModuleCoolingEntry 1 }

cefcModuleCoolingUnit OBJECT-TYPE
    SYNTAX          FRUCoolingUnit
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The unit of the cooling requirement of the module and its
        daughter cards." 
    ::= { cefcModuleCoolingEntry 2 }
 


cefcFanCoolingCapTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcFanCoolingCapEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains a list of the possible cooling
        capacity modes and properties of the fans, whose 
        ENTITY-MIB entPhysicalTable entries have an 
        entPhysicalClass of 'fan'."
    ::= { cefcCooling 4 }

cefcFanCoolingCapEntry OBJECT-TYPE
    SYNTAX          CefcFanCoolingCapEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcFanCoolingCapacityEntry lists the cooling
        capacity mode of a manageable components of type
        entPhysicalClass 'fan'. It also lists the corresponding
        cooling capacity provided and the power consumed
        by the fan on this mode.


        Entries are created by the agent if the corresponding
        entry is created in ENTITY-MIB entPhysicalTable.

        Entries are deleted by the agent if the corresponding
        entry is deleted in ENTITY-MIB entPhysicalTable."
    INDEX           {
                        entPhysicalIndex,
                        cefcFanCoolingCapIndex
                    } 
    ::= { cefcFanCoolingCapTable 1 }

CefcFanCoolingCapEntry ::= SEQUENCE {
        cefcFanCoolingCapIndex        Unsigned32,
        cefcFanCoolingCapModeDescr    SnmpAdminString,
        cefcFanCoolingCapCapacity     Unsigned32,
        cefcFanCoolingCapCurrent      FRUCurrentType,
        cefcFanCoolingCapCapacityUnit FRUCoolingUnit
}

cefcFanCoolingCapIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..4095)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An arbitrary value that uniquely identifies a
        cooling capacity mode for a fan." 
    ::= { cefcFanCoolingCapEntry 1 }

cefcFanCoolingCapModeDescr OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "A textual description of the cooling capacity
        mode of the fan." 
    ::= { cefcFanCoolingCapEntry 2 }

cefcFanCoolingCapCapacity OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The cooling capacity that could be provided
        when the fan is operating in this mode.

        The default unit of the cooling capacity is 'cfm',
        if cefcFanCoolingCapCapacityUnit is not supported." 
    ::= { cefcFanCoolingCapEntry 3 }

cefcFanCoolingCapCurrent OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The power consumption of the fan when operating in
        in this mode." 
    ::= { cefcFanCoolingCapEntry 4 }

cefcFanCoolingCapCapacityUnit OBJECT-TYPE
    SYNTAX          FRUCoolingUnit
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The unit of the fan cooling capacity when operating
        in this mode." 
    ::= { cefcFanCoolingCapEntry 5 }
 

-- Connector rating management

cefcConnectorRatingTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcConnectorRatingEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains the connector power
        ratings of FRUs. 

        Only components with power connector rating 
        management are listed in this table."
    ::= { cefcConnector 1 }

cefcConnectorRatingEntry OBJECT-TYPE
    SYNTAX          CefcConnectorRatingEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcConnectorRatingEntry lists the
        power connector rating information of a 
        component in the system.

        An entry or entries are created by the agent
        when an physical entity with connector rating 
        management is added to the ENTITY-MIB 
        entPhysicalTable. An entry is deleted 
        by the agent at the entity removal."
    INDEX           { entPhysicalIndex } 
    ::= { cefcConnectorRatingTable 1 }

CefcConnectorRatingEntry ::= SEQUENCE {
        cefcConnectorRating FRUCurrentType
}

cefcConnectorRating OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The maximum power that the component's
        connector can withdraw." 
    ::= { cefcConnectorRatingEntry 1 }
 


cefcModulePowerConsumptionTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CefcModulePowerConsumptionEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains the total power consumption
        information for modules whose ENTITY-MIB 
        entPhysicalTable entries have an entPhysicalClass 
        of 'module'."
    ::= { cefcConnector 2 }

cefcModulePowerConsumptionEntry OBJECT-TYPE
    SYNTAX          CefcModulePowerConsumptionEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cefcModulePowerConsumptionEntry lists the total
        power consumption of a manageable components of type
        entPhysicalClass 'module'.

        Entries are created by the agent at the system
        power-up or module insertion.

        Entries are deleted by the agent upon module
        removal."
    INDEX           { entPhysicalIndex } 
    ::= { cefcModulePowerConsumptionTable 1 }

CefcModulePowerConsumptionEntry ::= SEQUENCE {
        cefcModulePowerConsumption FRUCurrentType
}

cefcModulePowerConsumption OBJECT-TYPE
    SYNTAX          FRUCurrentType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The combined power consumption to operate the module
        and its submodule(s) and inline-power device(s)." 
    ::= { cefcModulePowerConsumptionEntry 1 }
 


-- notifications

cefcMIBEnableStatusNotification OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This variable indicates whether the system
        produces the following notifications:
        cefcModuleStatusChange, cefcPowerStatusChange, 
        cefcFRUInserted, cefcFRURemoved, 
        cefcUnrecognizedFRU and cefcFanTrayStatusChange.

        A false value will prevent these notifications
        from being generated."
    DEFVAL          { false } 
    ::= { cefcMIBNotificationEnables 1 }

cefcEnablePSOutputChangeNotif OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This variable indicates whether the system
        produces the cefcPowerSupplyOutputChange 
        notifications when the output capacity of 
        a power supply has changed. A false value 
        will prevent this notification to generated."
    DEFVAL          { false } 
    ::= { cefcMIBNotificationEnables 2 }
cefcMIBNotifications  OBJECT IDENTIFIER
    ::= { cefcFRUMIBNotificationPrefix 0 }


cefcModuleStatusChange NOTIFICATION-TYPE
    OBJECTS         {
                        cefcModuleOperStatus,
                        cefcModuleStatusLastChangeTime
                    }
    STATUS          current
    DESCRIPTION
        "This notification is generated when the value of
        cefcModuleOperStatus changes. It can be utilized by 
        an NMS to update the status of the module it is
        managing."
   ::= { cefcMIBNotifications 1 }

cefcPowerStatusChange NOTIFICATION-TYPE
    OBJECTS         {
                        cefcFRUPowerOperStatus,
                        cefcFRUPowerAdminStatus
                    }
    STATUS          current
    DESCRIPTION
        "The cefcFRUPowerStatusChange notification indicates that
        the power status of a FRU has changed. The varbind for this
        notification indicates the entPhysicalIndex of the FRU,
        and the new operational-status of the FRU."
   ::= { cefcMIBNotifications 2 }

cefcFRUInserted NOTIFICATION-TYPE
    OBJECTS         { entPhysicalContainedIn }
    STATUS          current
    DESCRIPTION
        "The cecfFRUInserted notification indicates that a FRU was
        inserted. The varbind for this notification indicates the
        entPhysicalIndex of the inserted FRU, and the entPhysicalIndex
        of the FRU's container."
   ::= { cefcMIBNotifications 3 }

cefcFRURemoved NOTIFICATION-TYPE
    OBJECTS         { entPhysicalContainedIn }
    STATUS          current
    DESCRIPTION
        "The cefcFRURemoved notification indicates that a FRU was
        removed. The varbind for this notification indicates the
        entPhysicalIndex of the removed FRU, and the entPhysicalIndex
        of the FRU's container."
   ::= { cefcMIBNotifications 4 }

cefcUnrecognizedFRU NOTIFICATION-TYPE
    OBJECTS         {
                        entPhysicalClass,
                        entPhysicalVendorType,
                        entPhysicalName,
                        entPhysicalModelName,
                        cefcPhysicalStatus
                    }
    STATUS          current
    DESCRIPTION
        "The cefcUnrecognizedFRU notification indicates that a FRU was
        inserted whose product ID is not supported. The varbind for
        this notification indicates the entPhysicalIndex of the 
        inserted FRU, the entPhysicalClass this FRU belongs to, the
        entPhysicalVendorType of this FRU, the entPhysicalName
        of the FRU, the entPhysicalModelName of the inserted FRU, and
        the cefcPhysicalStatus telling the reason code for sending this
        notification."
   ::= { cefcMIBNotifications 5 }

cefcFanTrayStatusChange NOTIFICATION-TYPE
    OBJECTS         { cefcFanTrayOperStatus }
    STATUS          current
    DESCRIPTION
        "This notification is generated when the value of
        cefcFanTrayOperStatus changes."
   ::= { cefcMIBNotifications 6 }

cefcPowerSupplyOutputChange NOTIFICATION-TYPE
    OBJECTS         {
                        entPhysicalName,
                        entPhysicalModelName,
                        cefcPSOutputModeCurrent
                    }
    STATUS          current
    DESCRIPTION
        "The notification indicates that the power
        supply's output capacity has changed.

        This notification is triggered whenever one instance 
        of the power supply's cefcPSOutputModeInOperation 
        has transitioned from 'false' to 'true'."
   ::= { cefcMIBNotifications 7 }
-- conformance information

cefcMIBCompliances  OBJECT IDENTIFIER
    ::= { cefcMIBConformance 1 }

cefcMIBGroups  OBJECT IDENTIFIER
    ::= { cefcMIBConformance 2 }


-- compliance statements

cefcMIBPowerCompliance MODULE-COMPLIANCE
    STATUS          obsolete
    DESCRIPTION
        "An Entity-MIB implementation can implement this group to
        provide FRU power status and control."
    MODULE          -- this module
    MANDATORY-GROUPS { cefcMIBPowerModeGroup }

    GROUP           cefcMIBPowerFRUControlGroup
    DESCRIPTION
        "The cefcMIBPowerFRUControlGroup must be implemented
        for FRUs that have power control"
    ::= { cefcMIBCompliances 1 }

cefcMIBPowerCompliance2 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "An Entity-MIB implementation can implement this group to
        provide FRU power status and control."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cefcMIBPowerModeGroup,
                        cefcMgmtNotificationsGroup
                    }

    GROUP           cefcMIBPowerFRUControlGroup
    DESCRIPTION
        "The cefcMIBPowerFRUControlGroup must be implemented
        for FRUs that have power control"

    GROUP           cefcMIBModuleGroup
    DESCRIPTION
        "The cefcMIBModuleGroup must be implemented for
        FRUs that are of module type."

    GROUP           cefcMIBInLinePowerControlGroup
    DESCRIPTION
        "The cefcMIBInLinePowerControlGroup must be implemented
        for FRUs that have inline power control"

    GROUP           cefcMIBNotificationEnablesGroup
    DESCRIPTION
        "The cefcMIBNotificationEnablesGroup must be
        implemented for FRUs that have notification"
    ::= { cefcMIBCompliances 2 }

cefcMIBPowerCompliance3 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "An Entity-MIB implementation can implement this group to
        provide FRU power status and control."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cefcMIBPowerModeGroup,
                        cefcMgmtNotificationsGroup
                    }

    GROUP           cefcMIBPowerFRUControlGroup
    DESCRIPTION
        "The cefcMIBPowerFRUControlGroup must be implemented
        for FRUs that have power control"

    GROUP           cefcMIBModuleGroup
    DESCRIPTION
        "The cefcMIBModuleGroup must be implemented for
        FRUs that are of module type."

    GROUP           cefcMIBInLinePowerControlGroup
    DESCRIPTION
        "The cefcMIBInLinePowerControlGroup must be
        implemented for FRUs that have inline power control"

    GROUP           cefcMIBNotificationEnablesGroup
    DESCRIPTION
        "The cefcMIBNotificationEnablesGroup must be
        implemented for FRUs that have notification"

    GROUP           cefcModuleGroupRev1
    DESCRIPTION
        "The cefcModuleGroupRev1 is not mandatory for
        agents with FRUs that are of module type."
    ::= { cefcMIBCompliances 3 }

cefcMIBPowerCompliance4 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "An Entity-MIB implementation can implement this group to
        provide FRU power status and control."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cefcMIBPowerModeGroup,
                        cefcMgmtNotificationsGroup
                    }

    GROUP           cefcMIBPowerFRUControlGroup
    DESCRIPTION
        "The cefcMIBPowerFRUControlGroup must be implemented
        for FRUs that have power control"

    GROUP           cefcMIBModuleGroup
    DESCRIPTION
        "The cefcMIBModuleGroup must be implemented for
        FRUs that are of module type."

    GROUP           cefcMIBInLinePowerControlGroup
    DESCRIPTION
        "The cefcMIBInLinePowerControlGroup must be
        implemented for FRUs that have inline power control"

    GROUP           cefcMIBNotificationEnablesGroup
    DESCRIPTION
        "The cefcMIBNotificationEnablesGroup must be
        implemented for FRUs that have notification"

    GROUP           cefcModuleGroupRev1
    DESCRIPTION
        "The cefcModuleGroupRev1 is not mandatory for
        agents with FRUs that are of module type."

    GROUP           cefcMIBPowerFRUValueGroup
    DESCRIPTION
        "The cefcMIBPowerFRUValueGroup must be implemented for
        power supply FRUs that have variable output"

    OBJECT          cefcFRUTotalSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUTotalInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."
    ::= { cefcMIBCompliances 4 }

cefcMIBPowerCompliance5 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "An Entity-MIB implementation can implement this group to
        provide FRU power status and control."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cefcMIBPowerModeGroup,
                        cefcMgmtNotificationsGroup,
                        cefcMgmtNotificationsGroup2
                    }

    GROUP           cefcMIBPowerFRUControlGroup
    DESCRIPTION
        "The cefcMIBPowerFRUControlGroup must be implemented
        for FRUs that have power control"

    GROUP           cefcMIBModuleGroup
    DESCRIPTION
        "The cefcMIBModuleGroup must be implemented for
        FRUs that are of module type."

    GROUP           cefcMIBInLinePowerControlGroup
    DESCRIPTION
        "The cefcMIBInLinePowerControlGroup must be
        implemented for FRUs that have inline power control"

    GROUP           cefcMIBNotificationEnablesGroup
    DESCRIPTION
        "The cefcMIBNotificationEnablesGroup must be
        implemented for FRUs that have notification"

    GROUP           cefcModuleGroupRev1
    DESCRIPTION
        "The cefcModuleGroupRev1 is not mandatory for
        agents with FRUs that are of module type."

    GROUP           cefcMIBPowerFRUValueGroup
    DESCRIPTION
        "The cefcMIBPowerFRUValueGroup must be implemented for
        power supply FRUs that have variable output"

    GROUP           cefcMIBFanTrayStatusGroup
    DESCRIPTION
        "The cefcMIBFanTrayStatusGroup must be implemented
        in all systems which can detect the status of Fan
        Tray FRUs."

    GROUP           cefcMIBPhysicalGroup
    DESCRIPTION
        "The collection of objects which show information of
        the Physical Entity."

    OBJECT          cefcFRUTotalSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUTotalInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."
    ::= { cefcMIBCompliances 5 }

cefcMIBPowerCompliance6 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "An Entity-MIB implementation can implement this group to
        provide FRU power status and control."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cefcMIBPowerModeGroup,
                        cefcMgmtNotificationsGroup
                    }

    GROUP           cefcMIBPowerFRUControlGroup
    DESCRIPTION
        "The cefcMIBPowerFRUControlGroup must be implemented
        for FRUs that have power control"

    GROUP           cefcMIBModuleGroup
    DESCRIPTION
        "The cefcMIBModuleGroup must be implemented for
        FRUs that are of module type."

    GROUP           cefcMIBInLinePowerControlGroupRev1
    DESCRIPTION
        "The cefcMIBInLinePowerControlGroup must be
        implemented for FRUs that have inline power control"

    GROUP           cefcMIBNotificationEnablesGroup
    DESCRIPTION
        "The cefcMIBNotificationEnablesGroup must be
        implemented for FRUs that have notification"

    GROUP           cefcModuleGroupRev1
    DESCRIPTION
        "The cefcModuleGroupRev1 is not mandatory for
        agents with FRUs that are of module type."

    GROUP           cefcMIBPowerFRUValueGroup
    DESCRIPTION
        "The cefcMIBPowerFRUValueGroup must be implemented for
        power supply FRUs that have variable output"

    GROUP           cefcMIBFanTrayStatusGroup
    DESCRIPTION
        "The cefcMIBFanTrayStatusGroup must be implemented
        in all systems which can detect the status of Fan
        Tray FRUs."

    GROUP           cefcMIBPhysicalGroup
    DESCRIPTION
        "The collection of objects which show information of
        the Physical Entity."

    GROUP           cefcMgmtNotificationsGroup2
    DESCRIPTION
        "The implementation of this group of notifications
        is optional."

    GROUP           cefcMIBPowerOperModeGroup
    DESCRIPTION
        "The cefcMIBPowerOperModeGroup must be
        implemented for the device which supports
        power supply operational modes."

    GROUP           cefcModuleExtGroup
    DESCRIPTION
        "Implementation of cefcModuleExtGroup is
        optional."

    GROUP           cefcIntelliModuleGroup
    DESCRIPTION
        "Implementation of cefcModuleAddrGroup is
        optional."

    OBJECT          cefcFRUTotalSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUTotalInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcIntelliModuleIPAddrType
    SYNTAX          INTEGER  {
                        ipv4(1)
                    }
    DESCRIPTION
        "An implementation is only required to
        support IPv4 addresses."
    ::= { cefcMIBCompliances 6 }

cefcMIBPowerCompliance7 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "An Entity-MIB implementation can implement this group to
        provide FRU power status and control."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cefcMIBPowerModeGroup,
                        cefcMgmtNotificationsGroup
                    }

    GROUP           cefcMIBPowerFRUControlGroup
    DESCRIPTION
        "The cefcMIBPowerFRUControlGroup must be implemented
        for FRUs that have power control"

    GROUP           cefcMIBModuleGroup
    DESCRIPTION
        "The cefcMIBModuleGroup must be implemented for
        FRUs that are of module type."

    GROUP           cefcMIBInLinePowerControlGroupRev1
    DESCRIPTION
        "The cefcMIBInLinePowerControlGroup must be
        implemented for FRUs that have inline power control"

    GROUP           cefcMIBNotificationEnablesGroup
    DESCRIPTION
        "The cefcMIBNotificationEnablesGroup must be
        implemented for FRUs that have notification"

    GROUP           cefcModuleGroupRev1
    DESCRIPTION
        "The cefcModuleGroupRev1 is not mandatory for
        agents with FRUs that are of module type."

    GROUP           cefcMIBPowerFRUValueGroup
    DESCRIPTION
        "The cefcMIBPowerFRUValueGroup must be implemented for
        power supply FRUs that have variable output"

    GROUP           cefcMIBFanTrayStatusGroup
    DESCRIPTION
        "The cefcMIBFanTrayStatusGroup must be implemented
        in all systems which can detect the status of Fan
        Tray FRUs."

    GROUP           cefcMIBPhysicalGroup
    DESCRIPTION
        "The collection of objects which show information of
        the Physical Entity."

    GROUP           cefcMgmtNotificationsGroup2
    DESCRIPTION
        "The implementation of this group of notifications
        is optional."

    GROUP           cefcMIBPowerOperModeGroup
    DESCRIPTION
        "The cefcMIBPowerOperModeGroup must be
        implemented for the device which supports
        power supply operational modes."

    GROUP           cefcModuleExtGroup
    DESCRIPTION
        "Implementation of cefcModuleExtGroup is
        optional."

    GROUP           cefcIntelliModuleGroup
    DESCRIPTION
        "Implementation of cefcModuleAddrGroup is
        optional."

    GROUP           cefcPowerCapacityGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate power capacity 
        information."

    GROUP           cefcCoolingGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate cooling 
        capacity information."

    GROUP           cefcConnectorRatingGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate power 
        connector rating and module power total 
        consumption information."

    GROUP           cefcMIBNotificationEnablesGroup2
    DESCRIPTION
        "This group is mandatory for devices which
        support the SNMP notification to notify
        the power supply output capacity changes."

    GROUP           cefcMgmtNotificationsGroup3
    DESCRIPTION
        "This group is mandatory for devices which
        support the SNMP notification to notify
        the power supply output capacity changes."

    OBJECT          cefcFRUTotalSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUTotalInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcIntelliModuleIPAddrType
    SYNTAX          INTEGER  {
                        ipv4(1)
                    }
    DESCRIPTION
        "An implementation is only required to
        support IPv4 addresses."
    ::= { cefcMIBCompliances 7 }

cefcMIBPowerCompliance8 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "An Entity-MIB implementation can implement this group to
        provide FRU power status and control."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cefcMIBPowerModeGroup,
                        cefcMgmtNotificationsGroup
                    }

    GROUP           cefcMIBPowerFRUControlGroup
    DESCRIPTION
        "The cefcMIBPowerFRUControlGroup must be implemented
        for FRUs that have power control"

    GROUP           cefcMIBModuleGroup
    DESCRIPTION
        "The cefcMIBModuleGroup must be implemented for
        FRUs that are of module type."

    GROUP           cefcMIBInLinePowerControlGroupRev1
    DESCRIPTION
        "The cefcMIBInLinePowerControlGroup must be
        implemented for FRUs that have inline power control"

    GROUP           cefcMIBNotificationEnablesGroup
    DESCRIPTION
        "The cefcMIBNotificationEnablesGroup must be
        implemented for FRUs that have notification"

    GROUP           cefcModuleGroupRev1
    DESCRIPTION
        "The cefcModuleGroupRev1 is not mandatory for
        agents with FRUs that are of module type."

    GROUP           cefcMIBPowerFRUValueGroup
    DESCRIPTION
        "The cefcMIBPowerFRUValueGroup must be implemented for
        power supply FRUs that have variable output"

    GROUP           cefcMIBFanTrayStatusGroup
    DESCRIPTION
        "The cefcMIBFanTrayStatusGroup must be implemented
        in all systems which can detect the status of Fan
        Tray FRUs."

    GROUP           cefcMIBPhysicalGroup
    DESCRIPTION
        "The collection of objects which show information of
        the Physical Entity."

    GROUP           cefcMgmtNotificationsGroup2
    DESCRIPTION
        "The implementation of this group of notifications
        is optional."

    GROUP           cefcMIBPowerOperModeGroup
    DESCRIPTION
        "The cefcMIBPowerOperModeGroup must be
        implemented for the device which supports
        power supply operational modes."

    GROUP           cefcModuleExtGroup
    DESCRIPTION
        "Implementation of cefcModuleExtGroup is
        optional."

    GROUP           cefcIntelliModuleGroup
    DESCRIPTION
        "Implementation of cefcModuleAddrGroup is
        optional."

    GROUP           cefcPowerCapacityGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate power capacity
        information."

    GROUP           cefcCoolingGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate cooling
        capacity information."

    GROUP           cefcConnectorRatingGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate power
        connector rating and module power total
        consumption information."

    GROUP           cefcMIBNotificationEnablesGroup2
    DESCRIPTION
        "This group is mandatory for devices which
        support the SNMP notification to notify
        the power supply output capacity changes."

    GROUP           cefcMgmtNotificationsGroup3
    DESCRIPTION
        "This group is mandatory for devices which
        support the SNMP notification to notify
        the power supply output capacity changes."

    GROUP           cefcMIBInLinePowerCurrentGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate inline power
        usage information."

    GROUP           cefcMIBPowerRedundancyInfoGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate the reason
        why the redundancy of the power supplies cannot
        be achieved."

    GROUP           cefcFanCoolingCapGroup
    DESCRIPTION
        "This group is mandatory for devices which
        can provide the cooling capacity modes 
        and properties of the fans in the system."

    OBJECT          cefcFRUTotalSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUTotalInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcIntelliModuleIPAddrType
    SYNTAX          INTEGER  {
                        ipv4(1)
                    }
    DESCRIPTION
        "An implementation is only required to
        support IPv4 addresses."
    ::= { cefcMIBCompliances 8 }

cefcMIBPowerCompliance9 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "An Entity-MIB implementation can implement this group to
        provide FRU power status and control."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cefcMIBPowerModeGroup,
                        cefcMgmtNotificationsGroup
                    }

    GROUP           cefcMIBPowerFRUControlGroup
    DESCRIPTION
        "The cefcMIBPowerFRUControlGroup must be implemented
        for FRUs that have power control"

    GROUP           cefcMIBModuleGroup
    DESCRIPTION
        "The cefcMIBModuleGroup must be implemented for
        FRUs that are of module type."

    GROUP           cefcMIBInLinePowerControlGroupRev1
    DESCRIPTION
        "The cefcMIBInLinePowerControlGroup must be
        implemented for FRUs that have inline power control"

    GROUP           cefcMIBNotificationEnablesGroup
    DESCRIPTION
        "The cefcMIBNotificationEnablesGroup must be
        implemented for FRUs that have notification"

    GROUP           cefcModuleGroupRev1
    DESCRIPTION
        "The cefcModuleGroupRev1 is not mandatory for
        agents with FRUs that are of module type."

    GROUP           cefcMIBPowerFRUValueGroup
    DESCRIPTION
        "The cefcMIBPowerFRUValueGroup must be implemented for
        power supply FRUs that have variable output"

    GROUP           cefcMIBFanTrayStatusGroup
    DESCRIPTION
        "The cefcMIBFanTrayStatusGroup must be implemented
        in all systems which can detect the status of Fan
        Tray FRUs."

    GROUP           cefcMIBPhysicalGroup
    DESCRIPTION
        "The collection of objects which show information of
        the Physical Entity."

    GROUP           cefcMgmtNotificationsGroup2
    DESCRIPTION
        "The implementation of this group of notifications
        is optional."

    GROUP           cefcMIBPowerOperModeGroup
    DESCRIPTION
        "The cefcMIBPowerOperModeGroup must be
        implemented for the device which supports
        power supply operational modes."

    GROUP           cefcModuleExtGroup
    DESCRIPTION
        "Implementation of cefcModuleExtGroup is
        optional."

    GROUP           cefcIntelliModuleGroup
    DESCRIPTION
        "Implementation of cefcModuleAddrGroup is
        optional."

    GROUP           cefcPowerCapacityGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate power capacity
        information."

    GROUP           cefcConnectorRatingGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate power
        connector rating and module power total
        consumption information."

    GROUP           cefcMIBNotificationEnablesGroup2
    DESCRIPTION
        "This group is mandatory for devices which
        support the SNMP notification to notify
        the power supply output capacity changes."

    GROUP           cefcMgmtNotificationsGroup3
    DESCRIPTION
        "This group is mandatory for devices which
        support the SNMP notification to notify
        the power supply output capacity changes."

    GROUP           cefcMIBInLinePowerCurrentGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate inline power
        usage information."

    GROUP           cefcMIBPowerRedundancyInfoGroup
    DESCRIPTION
        "This group is mandatory for devices which
        have the capability to populate the reason
        why the redundancy of the power supplies cannot
        be achived."

    GROUP           cefcFanCoolingCapGroup
    DESCRIPTION
        "This group is mandatory for devices which
        can provide the cooling capacity modes 
        and properties of the fans in the system."

    GROUP           cefcMIBModuleLocalSwitchingGroup
    DESCRIPTION
        "This group is mandatory for devices which
        support modules with local switching
        functionality."

    GROUP           cefcFRUPowerRealTimeStatusGroup
    DESCRIPTION
        "This group is mandatory for devices which
        support power related realtime status."

    GROUP           cefcFRUPowerCapabilityGroup
    DESCRIPTION
        "This group is mandatory for devices which
        support power related capability information."

    GROUP           cefcFRUCoolingUnitGroup
    DESCRIPTION
        "This group is mandatory for devices which
        support the cooling unit information."

    GROUP           cefcFRUFanCoolingUnitGroup
    DESCRIPTION
        "This group is mandatory for devices which
        support the fan capacity cooling unit information."

    GROUP           cefcCoolingGroup2
    DESCRIPTION
        "This group is mandatory for devices which
        support the chassis cooling capacity and module
        cooling requirement."

    GROUP           cefcFanCoolingGroup
    DESCRIPTION
        "This group is mandatory for devices which
        support the fan cooling capacity information."

    OBJECT          cefcFRUTotalSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnSystemCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUTotalInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcFRUDrawnInlineCurrent
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcModuleLocalSwitchingMode
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cefcIntelliModuleIPAddrType
    SYNTAX          INTEGER  {
                        ipv4(1)
                    }
    DESCRIPTION
        "An implementation is only required to
        support IPv4 addresses."
    ::= { cefcMIBCompliances 9 }

-- units of conformance

cefcMIBPowerModeGroup OBJECT-GROUP
    OBJECTS         {
                        cefcPowerRedundancyMode,
                        cefcPowerUnits,
                        cefcTotalAvailableCurrent,
                        cefcTotalDrawnCurrent
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used
        to configure and monitor power-control for
        FRUs."
    ::= { cefcMIBGroups 1 }

cefcMIBPowerFRUControlGroup OBJECT-GROUP
    OBJECTS         {
                        cefcFRUPowerAdminStatus,
                        cefcFRUPowerOperStatus,
                        cefcFRUCurrent
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used
        to configure and monitor power-control for
        FRUs."
    ::= { cefcMIBGroups 2 }

cefcMIBModuleGroup OBJECT-GROUP
    OBJECTS         {
                        cefcModuleAdminStatus,
                        cefcModuleOperStatus,
                        cefcModuleResetReason,
                        cefcModuleStatusLastChangeTime
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to get the
        operational state and redundancy state of the modules"
    ::= { cefcMIBGroups 3 }

cefcMIBInLinePowerControlGroup OBJECT-GROUP
    OBJECTS         { cefcMaxDefaultInLinePower }
    STATUS          deprecated
    DESCRIPTION
        "The collection of objects which are used to
        configure and monitor inline power control for
        FRUs."
    ::= { cefcMIBGroups 4 }

cefcMIBNotificationEnablesGroup OBJECT-GROUP
    OBJECTS         { cefcMIBEnableStatusNotification }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to
        enable notification."
    ::= { cefcMIBGroups 5 }

cefcMgmtNotificationsGroup NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        cefcModuleStatusChange,
                        cefcPowerStatusChange,
                        cefcFRUInserted,
                        cefcFRURemoved
                    }
    STATUS          current
    DESCRIPTION
        "The notifications which a FRU Management entity is
        required to implement."
    ::= { cefcMIBGroups 6 }

cefcModuleGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        cefcModuleLastClearConfigTime,
                        cefcModuleResetReasonDescription
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to get the
        operational state and redundancy state of the modules"
    ::= { cefcMIBGroups 7 }

cefcMIBPowerFRUValueGroup OBJECT-GROUP
    OBJECTS         {
                        cefcFRUTotalSystemCurrent,
                        cefcFRUDrawnSystemCurrent,
                        cefcFRUTotalInlineCurrent,
                        cefcFRUDrawnInlineCurrent
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to retrieve
        the total and used capacity of a power supply for both
        system and inline power."
    ::= { cefcMIBGroups 8 }

cefcMIBFanTrayStatusGroup OBJECT-GROUP
    OBJECTS         { cefcFanTrayOperStatus }
    STATUS          current
    DESCRIPTION
        "The collection of objects which show information of the
        status of Fan Tray FRUs."
    ::= { cefcMIBGroups 9 }

cefcMIBPhysicalGroup OBJECT-GROUP
    OBJECTS         { cefcPhysicalStatus }
    STATUS          current
    DESCRIPTION
        "The collection of objects which show information of the
        Physical Entity."
    ::= { cefcMIBGroups 10 }

cefcMgmtNotificationsGroup2 NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        cefcUnrecognizedFRU,
                        cefcFanTrayStatusChange
                    }
    STATUS          current
    DESCRIPTION
        "The additional notifications for FRU status."
    ::= { cefcMIBGroups 11 }

cefcMIBPowerOperModeGroup OBJECT-GROUP
    OBJECTS         { cefcPowerRedundancyOperMode }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used
        to monitor the device's power supply operational
        redundancy mode."
    ::= { cefcMIBGroups 12 }

cefcMIBInLinePowerControlGroupRev1 OBJECT-GROUP
    OBJECTS         { cefcMaxDefaultHighInLinePower }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to
        configure and monitor inline power control for
        FRUs."
    ::= { cefcMIBGroups 13 }

cefcModuleExtGroup OBJECT-GROUP
    OBJECTS         {
                        cefcModuleStateChangeReasonDescr,
                        cefcModuleUpTime
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to get the
        state change reason and up time of the modules."
    ::= { cefcMIBGroups 14 }

cefcIntelliModuleGroup OBJECT-GROUP
    OBJECTS         {
                        cefcIntelliModuleIPAddrType,
                        cefcIntelliModuleIPAddr
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to get the
        information specific to intelligent modules."
    ::= { cefcMIBGroups 15 }

cefcPowerCapacityGroup OBJECT-GROUP
    OBJECTS         {
                        cefcPowerSupplyInputType,
                        cefcPSOutputModeCurrent,
                        cefcPSOutputModeInOperation
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to get the
        power capacity information"
    ::= { cefcMIBGroups 16 }

cefcCoolingGroup OBJECT-GROUP
    OBJECTS         {
                        cefcChassisPerSlotCoolingCap,
                        cefcFanCoolingCapacity,
                        cefcModuleCooling
                    }
    STATUS          deprecated
    DESCRIPTION
        "The collection of objects which are used to get the
        cooling capacity information."
    ::= { cefcMIBGroups 17 }

cefcConnectorRatingGroup OBJECT-GROUP
    OBJECTS         {
                        cefcConnectorRating,
                        cefcModulePowerConsumption
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to get the
        power connector rating and module power total 
        consumption information."
    ::= { cefcMIBGroups 18 }

cefcMIBNotificationEnablesGroup2 OBJECT-GROUP
    OBJECTS         { cefcEnablePSOutputChangeNotif }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to
        enable additional group of notifications."
    ::= { cefcMIBGroups 19 }

cefcMgmtNotificationsGroup3 NOTIFICATION-GROUP
   NOTIFICATIONS    { cefcPowerSupplyOutputChange }
    STATUS          current
    DESCRIPTION
        "The additional notification for notify the
        power capacity mode change."
    ::= { cefcMIBGroups 20 }

cefcMIBInLinePowerCurrentGroup OBJECT-GROUP
    OBJECTS         { cefcTotalDrawnInlineCurrent }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to
        monitor inline power usage for FRUs."
    ::= { cefcMIBGroups 21 }

cefcMIBPowerRedundancyInfoGroup OBJECT-GROUP
    OBJECTS         { cefcPowerNonRedundantReason }
    STATUS          current
    DESCRIPTION
        "The collection of objects provide additional
        information about the device's power supply 
        redundancy."
    ::= { cefcMIBGroups 22 }

cefcFanCoolingCapGroup OBJECT-GROUP
    OBJECTS         {
                        cefcFanCoolingCapModeDescr,
                        cefcFanCoolingCapCapacity,
                        cefcFanCoolingCapCurrent
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects provide the cooling
        capacity modes and properties of the fans."
    ::= { cefcMIBGroups 23 }

cefcMIBModuleLocalSwitchingGroup OBJECT-GROUP
    OBJECTS         { cefcModuleLocalSwitchingMode }
    STATUS          current
    DESCRIPTION
        "The collection of objects which show information of the
        local switching status of modules."
    ::= { cefcMIBGroups 24 }

cefcFRUPowerRealTimeStatusGroup OBJECT-GROUP
    OBJECTS         { cefcFRURealTimeCurrent }
    STATUS          current
    DESCRIPTION
        "The collection of objects provide the power-related
        realtime information of the manageable entities."
    ::= { cefcMIBGroups 25 }

cefcFRUPowerCapabilityGroup OBJECT-GROUP
    OBJECTS         { cefcFRUPowerCapability }
    STATUS          current
    DESCRIPTION
        "The collection of objects provide the power-related
        capability information of the manageable entities."
    ::= { cefcMIBGroups 26 }

cefcFRUCoolingUnitGroup OBJECT-GROUP
    OBJECTS         {
                        cefcChassisPerSlotCoolingUnit,
                        cefcModuleCoolingUnit
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects provide the cooling unit
        information of the manageable entities."
    ::= { cefcMIBGroups 27 }

cefcFRUFanCoolingUnitGroup OBJECT-GROUP
    OBJECTS         {
                        cefcFanCoolingCapacityUnit,
                        cefcFanCoolingCapCapacityUnit
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects provide the cooling unit
        information of the manageable fan entities."
    ::= { cefcMIBGroups 28 }

cefcCoolingGroup2 OBJECT-GROUP
    OBJECTS         {
                        cefcChassisPerSlotCoolingCap,
                        cefcModuleCooling
                    }
    STATUS          current
    DESCRIPTION
        "The collection of objects which are used to get the
        cooling capacity or requirement information."
    ::= { cefcMIBGroups 29 }

cefcFanCoolingGroup OBJECT-GROUP
    OBJECTS         { cefcFanCoolingCapacity }
    STATUS          current
    DESCRIPTION
        "The collection of objects provide the cooling
        capacity modes and properties of the fans."
    ::= { cefcMIBGroups 30 }

END