[e395ef]: cisco / CISCO-VDC-MIB.my Maximize Restore History

Download this file

CISCO-VDC-MIB.my    1397 lines (1205 with data), 44.8 kB

-- *****************************************************************
-- CISCO-VDC-MIB.my
-- Virtual Device Control MIB
-- April 2010, Matthew Anger
--   
-- Copyright (c) 2010-2013 by cisco Systems Inc.
-- All rights reserved.
--   
-- *****************************************************************

CISCO-VDC-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Unsigned32,
    Integer32,
    Gauge32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP
        FROM SNMPv2-CONF
    MacAddress,
    RowStatus,
    StorageType,
    DateAndTime,
    TruthValue,
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    InterfaceIndex
        FROM IF-MIB
    Cisco2KVlanList
        FROM CISCO-TC
    ciscoMgmt
        FROM CISCO-SMI;


ciscoVdcMIB MODULE-IDENTITY
    LAST-UPDATED    "201307020000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service
            Postal: 170 W Tasman Drive
            San Jose, CA  95134
            USA
            Tel: +1 800 553-NETS
            E-mail: cs-nexus7000@cisco.com"
    DESCRIPTION
        "This MIB module defines the objects that describes virtual
        devices. VDCs are a feature of Nexus series switches from Cisco
        Systems that allow users to create virtual switches and
        partition the physical hardware across said virtual switches.
        This is commonly used to provide management separation without
        the extra overhead of additional physical hardware.

        Glossary of the terms used in this MIB:

        VDC - Virtual Device Context

        HA - High Availability"
    REVISION        "201307020000Z"
    DESCRIPTION
        "Added MIN-ACCESS statement for the
        following objects:
        - ciscoVdcCombinedHostnameEnabled
        - ciscoVdcName
        - ciscoVdcRowStatus
        - ciscoVdcAdminStatus
        - ciscoVdcIfMembershipStorageType
        - ciscoVdcIfMembershipStatus
        - ciscoVdcFCoEVlansSecond2K
        - ciscoVdcFCoEVlansFirst2K
        - ciscoVdcFCoEVlansFromVdc
        - ciscoVdcSharedInterfaceStorageType
        - ciscoVdcSharedInterfaceRowStatus."
    REVISION        "201306080000Z"
    DESCRIPTION
        "Added following OBJECT-GROUP:
        - ciscoVdcExtGroup
        - ciscoVdcGlobalResUsageGroup
        - ciscoVdcResUsageGroup
        - ciscoVdcResTemplateGroup
        - ciscoVdcGlobalGroup
        - ciscoVdcIfMembershipGroup
        - ciscoVdcFCoEVlansGroup
        - ciscoVdcSharedInterfaceGroup
        Added new compliance
        - ciscoVdcMIBCompliance1."
    REVISION        "201105190000Z"
    DESCRIPTION
        "Initial version"
    ::= { ciscoMgmt 774 }


ciscoVdcMIBNotifs  OBJECT IDENTIFIER
    ::= { ciscoVdcMIB 0 }

ciscoVdcMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoVdcMIB 1 }

ciscoVdcMIBConform  OBJECT IDENTIFIER
    ::= { ciscoVdcMIB 2 }

ciscoVdcGlobal  OBJECT IDENTIFIER
    ::= { ciscoVdcMIBObjects 2 }

ciscoVdcExt  OBJECT IDENTIFIER
    ::= { ciscoVdcMIBObjects 3 }

ciscoVdcResource  OBJECT IDENTIFIER
    ::= { ciscoVdcMIBObjects 4 }

ciscoVdcInterface  OBJECT IDENTIFIER
    ::= { ciscoVdcMIBObjects 5 }


-- Textual Conventions

CiscoVdcHaPolicy ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The High Availability policy for VDC.
        reload     - reload the supervisor module
        restart    - take down the VDC and recreate it 
                     using the startup configuration
        bringDown  - put the VDC in failed state.  To recover 
                     from failed state, the physical device 
                     must be reloaded
        switchOver - initiate a supervisor module switchover"
    SYNTAX          INTEGER  {
                        reload(0),
                        restart(1),
                        bringDown(2),
                        switchOver(3)
                    }

CiscoVdcPercentOrMinusOne ::= TEXTUAL-CONVENTION
    DISPLAY-HINT    "d"
    STATUS          current
    DESCRIPTION
        "An integer that is in the range of a percent value.
        A value of -1 means that the percentage is not available."
    SYNTAX          Integer32 (-1 | 0..100)

-- The VDC Global Group

ciscoVdcMaxNumberVdcAllowed OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the maximum number of VDC instances
        that can be created in the device." 
    ::= { ciscoVdcGlobal 1 }

ciscoVdcCombinedHostnameEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies whether the combined hostname
        functionality is enabled or not.

        When the combined hostname functionality is enabled, 
        the hostname of non-default VDCs will be 
        <default VDC name>-<nondefault VDC name>." 
    ::= { ciscoVdcGlobal 2 }

ciscoVdcTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CiscoVdcEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains entries representing a VDC instance. There
        will be an entry for each VDC instance created in the system."
    ::= { ciscoVdcMIBObjects 1 }

ciscoVdcEntry OBJECT-TYPE
    SYNTAX          CiscoVdcEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry representing the information pertaining to a virtual
        device instance.

        A peer SNMP entity may create a virtual device instance by
        setting an instance of ciscoVdcRowStatus to 'createAndWait' or
        'createAndGo'.  Observe that an implementation that does not
        support these options must specify these limitations in an agent
        capabilities statement. 

        Other management entities (e.g., the local console) may perform
        actions resulting in the creation of a virtual device instance.
        In these cases, the system must automatically create a row in
        the ciscoVdcTable. 

        A peer SNMP entity may destroy a virtual device instance by
        setting the corresponding instance of ciscoVdcRowStatus to
        'destroy'.  Observe that an implementation that does not support
        this option must specify this limitation in an agent
        capabilities statement. 

        Other management entities may perform actions resulting in the
        destruction of a virtual device instance.  In these cases, the
        system must automatically destroy the corresponding row in the
        ciscoVdcTable."
    INDEX           { ciscoVdcId } 
    ::= { ciscoVdcTable 1 }

CiscoVdcEntry ::= SEQUENCE {
        ciscoVdcId          Unsigned32,
        ciscoVdcName        SnmpAdminString,
        ciscoVdcState       INTEGER,
        ciscoVdcFcoeCapable INTEGER,
        ciscoVdcMac         MacAddress,
        ciscoVdcSwitchId    MacAddress,
        ciscoVdcRowStatus   RowStatus,
        ciscoVdcStorageType StorageType
}

ciscoVdcId OBJECT-TYPE
    SYNTAX          Unsigned32 (1..4096)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates an arbitrary integer-value that uniquely
        identifies a virtual device instance." 
    ::= { ciscoVdcEntry 1 }

ciscoVdcName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The human-readable name of the VDC instance. This name uniquely
        identifies the VDC instance in the system." 
    ::= { ciscoVdcEntry 2 }

ciscoVdcState OBJECT-TYPE
    SYNTAX          INTEGER  {
                        active(1),
                        suspended(2),
                        nonconfigured(3),
                        configured(4),
                        creating(5),
                        deleting(6),
                        failed(7),
                        pending(8),
                        updating(9),
                        restarting(10),
                        suspending(11),
                        resuming(12),
                        failing(13)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the current operational state of the
        virtual device." 
    ::= { ciscoVdcEntry 3 }

ciscoVdcFcoeCapable OBJECT-TYPE
    SYNTAX          INTEGER  {
                        disallowed(1),
                        allowed(2),
                        installed(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the FCoE capabilities of the virtual
        device." 
    ::= { ciscoVdcEntry 4 }

ciscoVdcMac OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the router MAC address of the virtual
        device." 
    ::= { ciscoVdcEntry 5 }

ciscoVdcSwitchId OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the MAC address of the device where the
        virtual device instance is created." 
    ::= { ciscoVdcEntry 6 }

ciscoVdcRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to create, modify, and/or delete a row in
        this table. 

        In particular, a newly created row cannot be made active until
        the ciscoVdcName value is set. ciscoVdcName may not be modified
        while the value of this object is active(1). An attempt to set
        ciscoVdcName while the value of RowStatus is active(1) will
        result in an inconsistentValue error. Agent may delete any
        virtual device which has ciscoVdcState of active(1) and
        ciscoVdcRowStatus of Active." 
    ::= { ciscoVdcEntry 7 }

ciscoVdcStorageType OBJECT-TYPE
    SYNTAX          StorageType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the storage type for this conceptual row.
        The following columnar objects are allowed to be writable when
        the storageType of this conceptual row is permanent(4):
        none" 
    ::= { ciscoVdcEntry 8 }
 


ciscoVdcExtTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CiscoVdcExtEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains additional information of
        a VDC instance. There will be an entry for each 
        VDC instance created in the system."
    ::= { ciscoVdcExt 1 }

ciscoVdcExtEntry OBJECT-TYPE
    SYNTAX          CiscoVdcExtEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains additional information of a VDC instance."
    INDEX           { ciscoVdcId } 
    ::= { ciscoVdcExtTable 1 }

CiscoVdcExtEntry ::= SEQUENCE {
        ciscoVdcSingleSupHaPolicy   CiscoVdcHaPolicy,
        ciscoVdcDualSupHaPolicy     CiscoVdcHaPolicy,
        ciscoVdcBootOrder           Unsigned32,
        ciscoVdcTimeCreated         DateAndTime,
        ciscoVdcReloadCount         Gauge32,
        ciscoVdcRestartCount        Gauge32,
        ciscoVdcRestartTime         DateAndTime,
        ciscoVdcRestartReason       SnmpAdminString,
        ciscoVdcType                INTEGER,
        ciscoVdcAdminStatus         INTEGER,
        ciscoVdcFromUnallocatedIntf INTEGER,
        ciscoVdcFeatureSetList      BITS,
        ciscoVdcResourceTemplate    SnmpAdminString,
        ciscoVdcModuleCapList       BITS,
        ciscoVdcCpuPriority         Integer32,
        ciscoVdcCpuSharePercent     CiscoVdcPercentOrMinusOne
}

ciscoVdcSingleSupHaPolicy OBJECT-TYPE
    SYNTAX          CiscoVdcHaPolicy
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the High Availability policy
        of a particular VDC when there is only one supervisor
        on the device."
    DEFVAL          { restart } 
    ::= { ciscoVdcExtEntry 1 }

ciscoVdcDualSupHaPolicy OBJECT-TYPE
    SYNTAX          CiscoVdcHaPolicy
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the High Availability policy
        of a particular VDC when both the active supervisor and
        standby supervisor are present on the device."
    DEFVAL          { switchOver } 
    ::= { ciscoVdcExtEntry 2 }

ciscoVdcBootOrder OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the boot order value for this
        particular VDC.  The VDCs with the lowest boot order
        will boot first." 
    ::= { ciscoVdcExtEntry 3 }

ciscoVdcTimeCreated OBJECT-TYPE
    SYNTAX          DateAndTime
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the time at which a particular
        VDC was created." 
    ::= { ciscoVdcExtEntry 4 }

ciscoVdcReloadCount OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of times a particular
        VDC has been reloaded." 
    ::= { ciscoVdcExtEntry 5 }

ciscoVdcRestartCount OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of times a VDC identified
        by ciscoVdcId has been restarted." 
    ::= { ciscoVdcExtEntry 6 }

ciscoVdcRestartTime OBJECT-TYPE
    SYNTAX          DateAndTime
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the most recent restart time of
        the VDC instance. 

        This object contains value 0x0000010100000000 when the 
        corresponding instance value of ciscoVdcRestartCount is '0'." 
    ::= { ciscoVdcExtEntry 7 }

ciscoVdcRestartReason OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the reason of the most recent restart of
        the VDC." 
    ::= { ciscoVdcExtEntry 8 }

ciscoVdcType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        admin(1),
                        ethernet(2),
                        storage(3)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the type of the VDC." 
    ::= { ciscoVdcExtEntry 9 }

ciscoVdcAdminStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        active(1),
                        suspended(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object indicates the administrative status of the VDC.

        active    -- the VDC will be put into active state.

        suspended -- the VDC will be put into paused state.
                     When the suspended VDC is bening resumed, 
                     it will come up with its startup configuration." 
    ::= { ciscoVdcExtEntry 10 }

ciscoVdcFromUnallocatedIntf OBJECT-TYPE
    SYNTAX          INTEGER  {
                        noOp(1),
                        allocate(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the way that interfaces are
        allocated from the unallocated interface pool.
        When the value of this object is set to 'allocate',
        interfaces in the unallocated interface pool will be 
        allocated to a particular VDC on a best-efforts basis.
        This object always has the value 'noOp' when read." 
    ::= { ciscoVdcExtEntry 11 }

ciscoVdcFeatureSetList OBJECT-TYPE
    SYNTAX          BITS {
                        fcoe(0),
                        fabricPath(1),
                        fex(2),
                        mpls(3),
                        ethernet(4)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies whether a specified feature set is
        enabled for a VDC.  If a bit corresponding to a feature
        set is set to 1, then the specified feature set is enabled.

        fcoe -- fiber channel over ethernet feature set.

        fabricPath -- fabric path feature set.

        fex  -- fabric extender feature set.

        mpls -- multiprotocol label switching feature set.

        ethernet -- ethernet feature set." 
    ::= { ciscoVdcExtEntry 12 }

ciscoVdcResourceTemplate OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the name of the resource template
        of the VDC." 
    ::= { ciscoVdcExtEntry 13 }

ciscoVdcModuleCapList OBJECT-TYPE
    SYNTAX          BITS {
                        m1(0),
                        f1(1),
                        m1xl(2),
                        f2(3),
                        m2xl(4),
                        fc(5),
                        f2e(6)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies type of modules which are allowed
        in this VDC.  If a bit corresponding to a module type is
        set to 1, then the specified module type is allowed
        in the VDC.

        m1 -- M1 series modules.

        f1 -- F1 series modules.

        m1xl -- M1XL series modules.

        f2 -- F2 series modules.

        m2xl -- M2XL series modules

        fc -- Fiber Channel modules

        f2e -- F2E series modules." 
    ::= { ciscoVdcExtEntry 14 }

ciscoVdcCpuPriority OBJECT-TYPE
    SYNTAX          Integer32 (-1..65535)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the CPU priority/share for a
        particular VDC.  A value of -1 means this information
        is not available." 
    ::= { ciscoVdcExtEntry 15 }

ciscoVdcCpuSharePercent OBJECT-TYPE
    SYNTAX          CiscoVdcPercentOrMinusOne
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the CPU share percentage for
        a particular VDC." 
    ::= { ciscoVdcExtEntry 16 }
 

-- The VDC Resource Group

ciscoVdcGlobalResUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CiscoVdcGlobalResUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information regarding global resource
        usage and utilization on the device."
    ::= { ciscoVdcResource 1 }

ciscoVdcGlobalResUsageEntry OBJECT-TYPE
    SYNTAX          CiscoVdcGlobalResUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains information regarding global usage and
        utilization for a particular resource."
    INDEX           { ciscoVdcGlobalResID } 
    ::= { ciscoVdcGlobalResUsageTable 1 }

CiscoVdcGlobalResUsageEntry ::= SEQUENCE {
        ciscoVdcGlobalResID     Unsigned32,
        ciscoVdcGlobalResName   SnmpAdminString,
        ciscoVdcGlobalResUsed   Unsigned32,
        ciscoVdcGlobalResUnused Unsigned32,
        ciscoVdcGlobalResFree   Unsigned32,
        ciscoVdcGlobalResAvail  Unsigned32,
        ciscoVdcGlobalResTotal  Unsigned32
}

ciscoVdcGlobalResID OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A unique value, greater than zero, that uniquely identifies
        a type of resource." 
    ::= { ciscoVdcGlobalResUsageEntry 1 }

ciscoVdcGlobalResName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the name of the resource on the device." 
    ::= { ciscoVdcGlobalResUsageEntry 2 }

ciscoVdcGlobalResUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of instances of a particular
        resource that are currently in use." 
    ::= { ciscoVdcGlobalResUsageEntry 3 }

ciscoVdcGlobalResUnused OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of instances of a particular
        resource that are reserved, and currently not in use." 
    ::= { ciscoVdcGlobalResUsageEntry 4 }

ciscoVdcGlobalResFree OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of instances of a particular
        resource that still remain to be used." 
    ::= { ciscoVdcGlobalResUsageEntry 5 }

ciscoVdcGlobalResAvail OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of instances of a particular
        resource that are available to be allocated." 
    ::= { ciscoVdcGlobalResUsageEntry 6 }

ciscoVdcGlobalResTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of a
        particular resource." 
    ::= { ciscoVdcGlobalResUsageEntry 7 }
 


ciscoVdcResUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CiscoVdcResUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information regarding resource usage
        and utilization for a particular VDC."
    ::= { ciscoVdcResource 2 }

ciscoVdcResUsageEntry OBJECT-TYPE
    SYNTAX          CiscoVdcResUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains information regarding the usage and
        utilization of a particular resource for a particular VDC."
    INDEX           {
                        ciscoVdcId,
                        ciscoVdcResID
                    } 
    ::= { ciscoVdcResUsageTable 1 }

CiscoVdcResUsageEntry ::= SEQUENCE {
        ciscoVdcResID     Unsigned32,
        ciscoVdcResMin    Unsigned32,
        ciscoVdcResMax    Unsigned32,
        ciscoVdcResUsed   Unsigned32,
        ciscoVdcResUnused Unsigned32,
        ciscoVdcResAvail  Unsigned32
}

ciscoVdcResID OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A unique value, greater than zero, that uniquely identifies
        a type of resource." 
    ::= { ciscoVdcResUsageEntry 1 }

ciscoVdcResMin OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the minimum number of instances of a
        particular resource that needs to be allocated to a particular
        VDC." 
    ::= { ciscoVdcResUsageEntry 2 }

ciscoVdcResMax OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the maximum number of instances of a
        particular resource that allow to be allocated to a particular
        VDC." 
    ::= { ciscoVdcResUsageEntry 3 }

ciscoVdcResUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of instances of a
        particular resource that are currently in use for a 
        particular VDC." 
    ::= { ciscoVdcResUsageEntry 4 }

ciscoVdcResUnused OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of instances of a particular
        resource that are reserved, and currently not in use for a 
        particular VDC." 
    ::= { ciscoVdcResUsageEntry 5 }

ciscoVdcResAvail OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of instances
        of a particular resource that are available to 
        be allocated for a particular VDC." 
    ::= { ciscoVdcResUsageEntry 6 }
 


ciscoVdcResTemplateTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CiscoVdcResTemplateEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information regarding the resource
        allocation for VDC resource template."
    ::= { ciscoVdcResource 3 }

ciscoVdcResTemplateEntry OBJECT-TYPE
    SYNTAX          CiscoVdcResTemplateEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains information regarding the allocation of a
        particluar resource for a particular VDC resource template."
    INDEX           {
                        ciscoVdcResTemplateName,
                        ciscoVdcResTemplateResID
                    } 
    ::= { ciscoVdcResTemplateTable 1 }

CiscoVdcResTemplateEntry ::= SEQUENCE {
        ciscoVdcResTemplateName        SnmpAdminString,
        ciscoVdcResTemplateResID       Unsigned32,
        ciscoVdcResTemplateMin         Unsigned32,
        ciscoVdcResTemplateMax         Unsigned32,
        ciscoVdcResTemplateStorageType StorageType,
        ciscoVdcResTemplateStatus      RowStatus
}

ciscoVdcResTemplateName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the name of the resource template." 
    ::= { ciscoVdcResTemplateEntry 1 }

ciscoVdcResTemplateResID OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A unique value, greater than zero, that can identify
        a type of resource." 
    ::= { ciscoVdcResTemplateEntry 2 }

ciscoVdcResTemplateMin OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specified the minimum number of instances of a
        particular resource that are allocated to this VDC template." 
    ::= { ciscoVdcResTemplateEntry 3 }

ciscoVdcResTemplateMax OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the maximum number of instances of a
        particular resource that are allocated to this VDC template." 
    ::= { ciscoVdcResTemplateEntry 4 }

ciscoVdcResTemplateStorageType OBJECT-TYPE
    SYNTAX          StorageType
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the storage type of a conceptual row
        in this table."
    DEFVAL          { volatile } 
    ::= { ciscoVdcResTemplateEntry 5 }

ciscoVdcResTemplateStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the status of a conceptual row in
        this table.All writable objects in this row may be modified 
        at any time." 
    ::= { ciscoVdcResTemplateEntry 6 }
 

-- The VDC Interface Group

ciscoVdcIfMembershipTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CiscoVdcIfMembershipEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information about VDC interface
        membership."
    ::= { ciscoVdcInterface 1 }

ciscoVdcIfMembershipEntry OBJECT-TYPE
    SYNTAX          CiscoVdcIfMembershipEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A conceptual row containing information about
        VDC interface membership."
    INDEX           {
                        ciscoVdcId,
                        ciscoVdcIfMembershipifIndex
                    } 
    ::= { ciscoVdcIfMembershipTable 1 }

CiscoVdcIfMembershipEntry ::= SEQUENCE {
        ciscoVdcIfMembershipifIndex     InterfaceIndex,
        ciscoVdcIfMembershipStorageType StorageType,
        ciscoVdcIfMembershipStatus      RowStatus
}

ciscoVdcIfMembershipifIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "ifIndex of the interface membership of this VDC." 
    ::= { ciscoVdcIfMembershipEntry 1 }

ciscoVdcIfMembershipStorageType OBJECT-TYPE
    SYNTAX          StorageType
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the storage type of a conceptual
        row in this table."
    DEFVAL          { volatile } 
    ::= { ciscoVdcIfMembershipEntry 2 }

ciscoVdcIfMembershipStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of a conceptual
        row in this table." 
    ::= { ciscoVdcIfMembershipEntry 3 }
 


ciscoVdcFCoEVlansTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CiscoVdcFCoEVlansEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information regarding allocation of
        VLANs that can be used for FCoE."
    ::= { ciscoVdcInterface 2 }

ciscoVdcFCoEVlansEntry OBJECT-TYPE
    SYNTAX          CiscoVdcFCoEVlansEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A conceptual row containing information regarding allocation of
        VLANs that can be used for FCoE."
    INDEX           { ciscoVdcId } 
    ::= { ciscoVdcFCoEVlansTable 1 }

CiscoVdcFCoEVlansEntry ::= SEQUENCE {
        ciscoVdcFCoEVlansFirst2K  Cisco2KVlanList,
        ciscoVdcFCoEVlansSecond2K Cisco2KVlanList,
        ciscoVdcFCoEVlansFromVdc  Unsigned32
}

ciscoVdcFCoEVlansFirst2K OBJECT-TYPE
    SYNTAX          Cisco2KVlanList
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "A string of octets containing one bit per VLAN for VLANs 0 to
        2047 that are reserved for FCoE.

        If the bit corresponding to a VLAN is set to '1', then the VLAN 
        is reserved for FCoE. If the bit is set to '0', then the VLAN 
        is not reserved for FCoE" 
    ::= { ciscoVdcFCoEVlansEntry 1 }

ciscoVdcFCoEVlansSecond2K OBJECT-TYPE
    SYNTAX          Cisco2KVlanList
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "A string of octets containing one bit per VLAN for VLANs 2048
        to 4095 that are reserved for FCoE.

        If the bit corresponding to a VLAN is set to '1', then the VLAN 
        is reserved for FCoE. If the bit is set to '0', then the VLAN 
        is not reserved for FCoE" 
    ::= { ciscoVdcFCoEVlansEntry 2 }

ciscoVdcFCoEVlansFromVdc OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies which VDCs are going to share ports
        with the storage VDC." 
    ::= { ciscoVdcFCoEVlansEntry 3 }
 


ciscoVdcSharedInterfaceTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CiscoVdcSharedInterfaceEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information about VDC shared interface
        membership."
    ::= { ciscoVdcInterface 3 }

ciscoVdcSharedInterfaceEntry OBJECT-TYPE
    SYNTAX          CiscoVdcSharedInterfaceEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A conceptual row containing information about VDC
        shared interface membership."
    INDEX           {
                        ciscoVdcId,
                        ciscoVdcSharedInterfaceifIndex
                    } 
    ::= { ciscoVdcSharedInterfaceTable 1 }

CiscoVdcSharedInterfaceEntry ::= SEQUENCE {
        ciscoVdcSharedInterfaceifIndex     InterfaceIndex,
        ciscoVdcSharedInterfaceStorageType StorageType,
        ciscoVdcSharedInterfaceRowStatus   RowStatus
}

ciscoVdcSharedInterfaceifIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A unique value, greater than zero, for each interface." 
    ::= { ciscoVdcSharedInterfaceEntry 1 }

ciscoVdcSharedInterfaceStorageType OBJECT-TYPE
    SYNTAX          StorageType
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the storage type of a conceptual
        row in this table"
    DEFVAL          { volatile } 
    ::= { ciscoVdcSharedInterfaceEntry 2 }

ciscoVdcSharedInterfaceRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of a conceptual
        row in this table." 
    ::= { ciscoVdcSharedInterfaceEntry 3 }
 

ciscoVdcMIBCompliances  OBJECT IDENTIFIER
    ::= { ciscoVdcMIBConform 1 }

ciscoVdcMIBGroups  OBJECT IDENTIFIER
    ::= { ciscoVdcMIBConform 2 }


ciscoVdcMIBCompliance MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "This compliance statement specifies the minimal requirements an
        implementation must meet in order to claim full compliance with
        the definition of the CISCO-VDC-MIB."
    MODULE          -- this module
    MANDATORY-GROUPS { ciscoVdcGroup }
    ::= { ciscoVdcMIBCompliances 1 }

ciscoVdcMIBCompliance1 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "This compliance statement specifies the minimal requirements an
        implementation must meet in order to claim full compliance with
        the definition of the CISCO-VDC-MIB."
    MODULE          -- this module
    MANDATORY-GROUPS { ciscoVdcGroup }

    GROUP           ciscoVdcExtGroup
    DESCRIPTION
        "Implementation of this group is mandatory only for
        the platforms which support additional VDC management
        information."

    GROUP           ciscoVdcGlobalResUsageGroup
    DESCRIPTION
        "Implementation of this group is mandatory only for
        the platforms which support global resource usage
        and utilization."

    GROUP           ciscoVdcResUsageGroup
    DESCRIPTION
        "Implementation of this group is mandatory only for
        the platforms which support per VDC resource usage
        and utilization."

    GROUP           ciscoVdcResTemplateGroup
    DESCRIPTION
        "Implementation of this group is mandatory only for
        the platforms which support resource allocation 
        template."

    GROUP           ciscoVdcGlobalGroup
    DESCRIPTION
        "Implementation of this group is mandatory only for
        the platforms which support maximum VDC number and
        combined hostname functionality."

    GROUP           ciscoVdcIfMembershipGroup
    DESCRIPTION
        "Implementation of this group is mandatory only for
        the platforms which support VDC interface membership
        functionality."

    GROUP           ciscoVdcFCoEVlansGroup
    DESCRIPTION
        "Implementation of this group is mandatory only for
        the platforms which support FCoE VLAN allocation."

    GROUP           ciscoVdcSharedInterfaceGroup
    DESCRIPTION
        "Implementation of this group is mandatory only for
        the platforms which support VDC interface
        shared membership functionality."

    OBJECT          ciscoVdcCombinedHostnameEnabled
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcName
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcRowStatus
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcSingleSupHaPolicy
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcDualSupHaPolicy
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcBootOrder
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcType
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcAdminStatus
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcFromUnallocatedIntf
    SYNTAX          INTEGER  {
                        noOp(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcFeatureSetList
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcResourceTemplate
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcModuleCapList
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcCpuPriority
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcResMin
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcResMax
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcResTemplateMin
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcResTemplateMax
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcResTemplateStorageType
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcResTemplateStatus
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcIfMembershipStorageType
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcIfMembershipStatus
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcFCoEVlansFirst2K
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcFCoEVlansSecond2K
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcFCoEVlansFromVdc
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcSharedInterfaceStorageType
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."

    OBJECT          ciscoVdcSharedInterfaceRowStatus
    MIN-ACCESS      read-only
    DESCRIPTION
        "It is compliant to implement this object as
        read-only."
    ::= { ciscoVdcMIBCompliances 2 }

-- This group contains objects describing virtual devices.

ciscoVdcGroup OBJECT-GROUP
    OBJECTS         {
                        ciscoVdcName,
                        ciscoVdcState,
                        ciscoVdcFcoeCapable,
                        ciscoVdcMac,
                        ciscoVdcSwitchId,
                        ciscoVdcRowStatus,
                        ciscoVdcStorageType
                    }
    STATUS          current
    DESCRIPTION
        "This group contains the objects describing virtual device
        instances."
    ::= { ciscoVdcMIBGroups 1 }

ciscoVdcExtGroup OBJECT-GROUP
    OBJECTS         {
                        ciscoVdcSingleSupHaPolicy,
                        ciscoVdcDualSupHaPolicy,
                        ciscoVdcBootOrder,
                        ciscoVdcTimeCreated,
                        ciscoVdcReloadCount,
                        ciscoVdcRestartCount,
                        ciscoVdcRestartTime,
                        ciscoVdcRestartReason,
                        ciscoVdcType,
                        ciscoVdcAdminStatus,
                        ciscoVdcFromUnallocatedIntf,
                        ciscoVdcFeatureSetList,
                        ciscoVdcResourceTemplate,
                        ciscoVdcModuleCapList,
                        ciscoVdcCpuPriority,
                        ciscoVdcCpuSharePercent
                    }
    STATUS          current
    DESCRIPTION
        "This group contains the additional objects describing virtual
        device instances."
    ::= { ciscoVdcMIBGroups 2 }

ciscoVdcGlobalResUsageGroup OBJECT-GROUP
    OBJECTS         {
                        ciscoVdcGlobalResName,
                        ciscoVdcGlobalResUsed,
                        ciscoVdcGlobalResUnused,
                        ciscoVdcGlobalResFree,
                        ciscoVdcGlobalResAvail,
                        ciscoVdcGlobalResTotal
                    }
    STATUS          current
    DESCRIPTION
        "This group contains the objects regarding global resource
        usage and utilization on the device."
    ::= { ciscoVdcMIBGroups 3 }

ciscoVdcResUsageGroup OBJECT-GROUP
    OBJECTS         {
                        ciscoVdcResMin,
                        ciscoVdcResMax,
                        ciscoVdcResUsed,
                        ciscoVdcResUnused,
                        ciscoVdcResAvail
                    }
    STATUS          current
    DESCRIPTION
        "This group contains the objects regarding resource usage
        and utilization for a particular VDC."
    ::= { ciscoVdcMIBGroups 4 }

ciscoVdcResTemplateGroup OBJECT-GROUP
    OBJECTS         {
                        ciscoVdcResTemplateMin,
                        ciscoVdcResTemplateMax,
                        ciscoVdcResTemplateStatus,
                        ciscoVdcResTemplateStorageType
                    }
    STATUS          current
    DESCRIPTION
        "This group contains the objects regarding the
        resource allocation information for VDC resource 
        template."
    ::= { ciscoVdcMIBGroups 5 }

ciscoVdcGlobalGroup OBJECT-GROUP
    OBJECTS         {
                        ciscoVdcMaxNumberVdcAllowed,
                        ciscoVdcCombinedHostnameEnabled
                    }
    STATUS          current
    DESCRIPTION
        "This group contains the objets regarding global
        information for VDC."
    ::= { ciscoVdcMIBGroups 6 }

ciscoVdcIfMembershipGroup OBJECT-GROUP
    OBJECTS         {
                        ciscoVdcIfMembershipStatus,
                        ciscoVdcIfMembershipStorageType
                    }
    STATUS          current
    DESCRIPTION
        "This group contains the object about VDC interface membership."
    ::= { ciscoVdcMIBGroups 7 }

ciscoVdcFCoEVlansGroup OBJECT-GROUP
    OBJECTS         {
                        ciscoVdcFCoEVlansFirst2K,
                        ciscoVdcFCoEVlansSecond2K,
                        ciscoVdcFCoEVlansFromVdc
                    }
    STATUS          current
    DESCRIPTION
        "This group contains the objects regarding allocation of
        VLANs that can be used for FCoE."
    ::= { ciscoVdcMIBGroups 8 }

ciscoVdcSharedInterfaceGroup OBJECT-GROUP
    OBJECTS         {
                        ciscoVdcSharedInterfaceRowStatus,
                        ciscoVdcSharedInterfaceStorageType
                    }
    STATUS          current
    DESCRIPTION
        "This group contains object about VDC interface
        shared membership."
    ::= { ciscoVdcMIBGroups 9 }

END