[3e954a]: cisco / ALTIGA-LBSSF-STATS-MIB.my Maximize Restore History

Download this file

ALTIGA-LBSSF-STATS-MIB.my    310 lines (265 with data), 8.8 kB

-- *------------------------------------------------------------------
-- * ALTIGA-LBSSF-STATS-MIB.my:
-- * Altiga Load Balancing and Secure Session Failover Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-LBSSF-STATS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, Integer32, Gauge32,
      IpAddress
         FROM SNMPv2-SMI
      TruthValue, RowStatus, TEXTUAL-CONVENTION
         FROM SNMPv2-TC
      OBJECT-GROUP, MODULE-COMPLIANCE
         FROM SNMPv2-CONF
      alStatsLBSSF, alLBSSFGroup
         FROM ALTIGA-MIB
      alLBSSFMibModule
         FROM ALTIGA-GLOBAL-REG;

   altigaLBSSFStatsMibModule MODULE-IDENTITY
      LAST-UPDATED   "200209051300Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Altiga Load Balancing and Secure Session Failover 
          Statistics MIB models counters and objects that are of 
          management interest for LBSSF.
         
          Acronyms
          The following acronyms are used in this document:

            LBSSF:      Load Balancing and Secure Session Failover

            MIB:        Management Information Base

         "

      REVISION "200209051300Z"
      DESCRIPTION
         "Added module compliance."

      REVISION "200207100000Z"
      DESCRIPTION
         "Updated with new header"

      ::= { alLBSSFMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

DeviceType     ::= TEXTUAL-CONVENTION
   STATUS         current
   DESCRIPTION
      "LBSSF Device Type."
   SYNTAX         INTEGER {
                     unknown(1),
                     vpn3005(3),
                     vpn3015(4),
                     vpn3030(5),
                     vpn3060(6),
                     vpn3080(7),
                     vpn3002(8)
                  }

DeviceRole     ::= TEXTUAL-CONVENTION
   STATUS         current
   DESCRIPTION
      "Load balancing device roles within a LBSSF cluster.
      
       virtualMaster: master of load balancing cluster
       slave        : slave in load balancing cluster
      "
   SYNTAX         INTEGER {
                     virtualMaster(1),
                     slave(2)
                  }

alStatsLBSSFGlobal   OBJECT IDENTIFIER ::= { alStatsLBSSF 1 }

alLBSSFRole OBJECT-TYPE
   SYNTAX         DeviceRole
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The role of this device."
   ::= { alStatsLBSSFGlobal 1 }

alLBSSFDeviceType OBJECT-TYPE
   SYNTAX         DeviceType
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Device type of this device."
   ::= { alStatsLBSSFGlobal 2 }

alLBSSFActive     OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Indicates if device is active or not."
   ::= { alStatsLBSSFGlobal 3 }

alLBSSFNumberOfPeers OBJECT-TYPE
   SYNTAX         Gauge32 (0..25)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of total current peers."
   ::= { alStatsLBSSFGlobal 4 }

alLBSSFLoad    OBJECT-TYPE
   SYNTAX         Gauge32 (0..100)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current calculated load of this device in percentage."
   ::= { alStatsLBSSFGlobal 5 }

alLBSSFPeerTable     OBJECT-TYPE
   SYNTAX         SEQUENCE OF AlLBSSFPeerEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
      "List of LBSSF peers within a LBSSF cluster."
   ::= { alStatsLBSSF 2 }

alLBSSFPeerEntry     OBJECT-TYPE
   SYNTAX         AlLBSSFPeerEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
      "An entry in the alLBSSFStatsPeerTable."
   INDEX    { alLBSSFPeerPrivIpAddress }
   ::= { alLBSSFPeerTable 1 }

AlLBSSFPeerEntry ::= SEQUENCE {
   alLBSSFPeerRowStatus            RowStatus,
   alLBSSFPeerPrivIpAddress        IpAddress,
   alLBSSFPeerPubIpAddress         IpAddress,
   alLBSSFPeerMappedPubIpAddress   IpAddress,
   alLBSSFPeerActive               TruthValue,
   alLBSSFPeerFaultZone            Integer32,
   alLBSSFPeerRole                 DeviceRole,
   alLBSSFPeerDeviceType           DeviceType,
   alLBSSFPeerLoad                 Gauge32,
   alLBSSFPeerPriority             Integer32,
   alLBSSFPeerActiveSessions       Gauge32,
   alLBSSFPeerJoinTime             TimeTicks
}

alLBSSFPeerRowStatus OBJECT-TYPE
   SYNTAX         RowStatus
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The status of this row."
   ::= { alLBSSFPeerEntry 1 }

alLBSSFPeerPrivIpAddress   OBJECT-TYPE
   SYNTAX         IpAddress
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Private LAN Ip address of this peer entry."
   ::= { alLBSSFPeerEntry 2 }

alLBSSFPeerPubIpAddress OBJECT-TYPE
   SYNTAX         IpAddress
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Public LAN Ip address of this peer entry."
   ::= { alLBSSFPeerEntry 3 }

alLBSSFPeerMappedPubIpAddress OBJECT-TYPE
   SYNTAX         IpAddress
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The NAT'ed Public Ip address of this peer entry."
   ::= { alLBSSFPeerEntry 4 }

alLBSSFPeerActive    OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Indicates if this peer is active or not."
   ::= { alLBSSFPeerEntry 5 }

alLBSSFPeerFaultZone OBJECT-TYPE
   SYNTAX         Integer32 (0..25)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Indicates which fault zone this peer belongs."
   ::= { alLBSSFPeerEntry 6 }

alLBSSFPeerRole      OBJECT-TYPE
   SYNTAX         DeviceRole
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Role of current peer"
   ::= { alLBSSFPeerEntry 7 }

alLBSSFPeerDeviceType      OBJECT-TYPE
   SYNTAX         DeviceType
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Device type of this peer."
   ::= { alLBSSFPeerEntry 8 }

alLBSSFPeerLoad      OBJECT-TYPE
   SYNTAX         Gauge32 (0..100)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Current load of the peer in percentage."
   ::= { alLBSSFPeerEntry 9 }

alLBSSFPeerPriority     OBJECT-TYPE
   SYNTAX         Integer32 (0..10)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Priority of the peer."
   ::= { alLBSSFPeerEntry 10 }

alLBSSFPeerActiveSessions     OBJECT-TYPE
   SYNTAX         Gauge32 (0..100000)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Number of current active sessions on this peer"
   ::= { alLBSSFPeerEntry 11 }

alLBSSFPeerJoinTime     OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Time in time-ticks when this peer join the virtual cluster"
   ::= { alLBSSFPeerEntry 12 }


altigaLBSSFStatsMibConformance OBJECT IDENTIFIER 
   ::= { altigaLBSSFStatsMibModule 1 }

altigaLBSSFStatsMibCompliances OBJECT IDENTIFIER 
   ::= { altigaLBSSFStatsMibConformance 1 }

altigaLBSSFStatsMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which implement the Altiga
       Load Balancing and Secure Session Failover Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      altigaStatsLBSSFGroup
   }
   ::= { altigaLBSSFStatsMibCompliances 1 }

altigaStatsLBSSFGroup OBJECT-GROUP
   OBJECTS
   {
      alLBSSFRole,
      alLBSSFDeviceType,
      alLBSSFActive,
      alLBSSFNumberOfPeers,
      alLBSSFLoad,
      alLBSSFPeerRowStatus,
      alLBSSFPeerPrivIpAddress,
      alLBSSFPeerPubIpAddress,
      alLBSSFPeerMappedPubIpAddress,
      alLBSSFPeerActive,
      alLBSSFPeerFaultZone,
      alLBSSFPeerRole,
      alLBSSFPeerDeviceType,
      alLBSSFPeerLoad,
      alLBSSFPeerPriority,
      alLBSSFPeerActiveSessions,
      alLBSSFPeerJoinTime
   }
   STATUS   current
   DESCRIPTION
      "The objects for the LBSSF statistics."
   ::= { alLBSSFGroup 3 }

END