From: SourceForge.net <noreply@so...>  20100830 06:48:32

Bugs item #3055829, was opened at 20100830 15:48 Message generated for change (Tracker Item Submitted) made by nabongwon You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=112694&aid=3055829&group_id=12694 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: agent Group: hpux Status: Open Resolution: None Priority: 5 Private: No Submitted By: BongWon Nah (nabongwon) Assigned to: Nobody/Anonymous (nobody) Summary: Timeout: No Response on HPUX Initial Comment: 1) OS version : HPUX 11.31 U ia64 2) netsnmp version NETSNMP version: 5.5 Web: http://www.netsnmp.org/ Email: netsnmpcoders@... 3) startup command : just use c option /opt/iexpress/netsnmp/sbin/snmpd c /opt/iexpress/netsnmp/etc/snmpd.conf 4) snmpd.conf [amhs01:/]cat /opt/iexpress/netsnmp/etc/snmpd.conf # com2sec amail 192.168.1.0/24 amail group monitor v1 amail group monitor v2c amail view all included .1 80 access monitor "" any noauth exact all none none 5) problem When I execute "snmpwalk ifEntry", the result was very slow and finally "Timeout : No response from xxx" occured. The result is below ======================================= [amhs01:/]snmpwalk v1 c amail amhs01 ifEntry IFMIB::ifIndex.1 = INTEGER: 1 IFMIB::ifIndex.2 = INTEGER: 2 IFMIB::ifIndex.3 = INTEGER: 3 IFMIB::ifIndex.4 = INTEGER: 4 IFMIB::ifIndex.5 = INTEGER: 5 IFMIB::ifIndex.6 = INTEGER: 6 IFMIB::ifIndex.7 = INTEGER: 7 IFMIB::ifIndex.8 = INTEGER: 8 IFMIB::ifIndex.9 = INTEGER: 9 IFMIB::ifIndex.10 = INTEGER: 10 IFMIB::ifIndex.11 = INTEGER: 11 IFMIB::ifIndex.12 = INTEGER: 12 IFMIB::ifIndex.13 = INTEGER: 13 IFMIB::ifIndex.14 = INTEGER: 14 IFMIB::ifIndex.15 = INTEGER: 15 IFMIB::ifIndex.16 = INTEGER: 16 IFMIB::ifIndex.17 = INTEGER: 17 IFMIB::ifIndex.18 = INTEGER: 18 IFMIB::ifIndex.19 = INTEGER: 19 IFMIB::ifIndex.20 = INTEGER: 20 IFMIB::ifIndex.21 = INTEGER: 21 IFMIB::ifIndex.22 = INTEGER: 22 IFMIB::ifIndex.23 = INTEGER: 23 IFMIB::ifIndex.24 = INTEGER: 24 IFMIB::ifIndex.25 = INTEGER: 25 IFMIB::ifIndex.26 = INTEGER: 26 IFMIB::ifIndex.27 = INTEGER: 27 IFMIB::ifIndex.28 = INTEGER: 28 IFMIB::ifIndex.29 = INTEGER: 29 IFMIB::ifIndex.30 = INTEGER: 30 IFMIB::ifIndex.31 = INTEGER: 31 IFMIB::ifIndex.32 = INTEGER: 32 IFMIB::ifIndex.33 = INTEGER: 33 IFMIB::ifIndex.34 = INTEGER: 34 IFMIB::ifIndex.35 = INTEGER: 35 IFMIB::ifIndex.36 = INTEGER: 36 IFMIB::ifIndex.37 = INTEGER: 37 IFMIB::ifIndex.38 = INTEGER: 38 IFMIB::ifIndex.39 = INTEGER: 39 IFMIB::ifIndex.40 = INTEGER: 40 IFMIB::ifIndex.41 = INTEGER: 41 IFMIB::ifIndex.42 = INTEGER: 42 IFMIB::ifIndex.43 = INTEGER: 43 IFMIB::ifIndex.44 = INTEGER: 44 IFMIB::ifIndex.45 = INTEGER: 45 IFMIB::ifIndex.46 = INTEGER: 46 IFMIB::ifIndex.47 = INTEGER: 47 IFMIB::ifIndex.48 = INTEGER: 48 IFMIB::ifIndex.49 = INTEGER: 49 IFMIB::ifIndex.50 = INTEGER: 50 IFMIB::ifIndex.51 = INTEGER: 51 IFMIB::ifIndex.52 = INTEGER: 52 IFMIB::ifIndex.53 = INTEGER: 53 IFMIB::ifIndex.54 = INTEGER: 54 Timeout: No Response from amhs01 [amhs01:/] ========================================== 6) refrence  cpu usage was approximately 21% (of 400%)  "snmpwalk v 1 c amail amhs01 system" was fast and normal  When I executed "snmpwalk v 1 c amail amhs01 mib2", SNMPv2MIB : was fast but I was very slow from "IFMIB:".  You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=112694&aid=3055829&group_id=12694 
From: SourceForge.net <noreply@so...>  20100901 03:37:00

Bugs item #3055829, was opened at 20100829 23:48 Message generated for change (Comment added) made by hardaker You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=112694&aid=3055829&group_id=12694 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: agent Group: hpux Status: Open Resolution: None Priority: 5 Private: No Submitted By: BongWon Nah (nabongwon) Assigned to: Nobody/Anonymous (nobody) Summary: Timeout: No Response on HPUX Initial Comment: 1) OS version : HPUX 11.31 U ia64 2) netsnmp version NETSNMP version: 5.5 Web: http://www.netsnmp.org/ Email: netsnmpcoders@... 3) startup command : just use c option /opt/iexpress/netsnmp/sbin/snmpd c /opt/iexpress/netsnmp/etc/snmpd.conf 4) snmpd.conf [amhs01:/]cat /opt/iexpress/netsnmp/etc/snmpd.conf # com2sec amail 192.168.1.0/24 amail group monitor v1 amail group monitor v2c amail view all included .1 80 access monitor "" any noauth exact all none none 5) problem When I execute "snmpwalk ifEntry", the result was very slow and finally "Timeout : No response from xxx" occured. The result is below ======================================= [amhs01:/]snmpwalk v1 c amail amhs01 ifEntry IFMIB::ifIndex.1 = INTEGER: 1 IFMIB::ifIndex.2 = INTEGER: 2 IFMIB::ifIndex.3 = INTEGER: 3 IFMIB::ifIndex.4 = INTEGER: 4 IFMIB::ifIndex.5 = INTEGER: 5 IFMIB::ifIndex.6 = INTEGER: 6 IFMIB::ifIndex.7 = INTEGER: 7 IFMIB::ifIndex.8 = INTEGER: 8 IFMIB::ifIndex.9 = INTEGER: 9 IFMIB::ifIndex.10 = INTEGER: 10 IFMIB::ifIndex.11 = INTEGER: 11 IFMIB::ifIndex.12 = INTEGER: 12 IFMIB::ifIndex.13 = INTEGER: 13 IFMIB::ifIndex.14 = INTEGER: 14 IFMIB::ifIndex.15 = INTEGER: 15 IFMIB::ifIndex.16 = INTEGER: 16 IFMIB::ifIndex.17 = INTEGER: 17 IFMIB::ifIndex.18 = INTEGER: 18 IFMIB::ifIndex.19 = INTEGER: 19 IFMIB::ifIndex.20 = INTEGER: 20 IFMIB::ifIndex.21 = INTEGER: 21 IFMIB::ifIndex.22 = INTEGER: 22 IFMIB::ifIndex.23 = INTEGER: 23 IFMIB::ifIndex.24 = INTEGER: 24 IFMIB::ifIndex.25 = INTEGER: 25 IFMIB::ifIndex.26 = INTEGER: 26 IFMIB::ifIndex.27 = INTEGER: 27 IFMIB::ifIndex.28 = INTEGER: 28 IFMIB::ifIndex.29 = INTEGER: 29 IFMIB::ifIndex.30 = INTEGER: 30 IFMIB::ifIndex.31 = INTEGER: 31 IFMIB::ifIndex.32 = INTEGER: 32 IFMIB::ifIndex.33 = INTEGER: 33 IFMIB::ifIndex.34 = INTEGER: 34 IFMIB::ifIndex.35 = INTEGER: 35 IFMIB::ifIndex.36 = INTEGER: 36 IFMIB::ifIndex.37 = INTEGER: 37 IFMIB::ifIndex.38 = INTEGER: 38 IFMIB::ifIndex.39 = INTEGER: 39 IFMIB::ifIndex.40 = INTEGER: 40 IFMIB::ifIndex.41 = INTEGER: 41 IFMIB::ifIndex.42 = INTEGER: 42 IFMIB::ifIndex.43 = INTEGER: 43 IFMIB::ifIndex.44 = INTEGER: 44 IFMIB::ifIndex.45 = INTEGER: 45 IFMIB::ifIndex.46 = INTEGER: 46 IFMIB::ifIndex.47 = INTEGER: 47 IFMIB::ifIndex.48 = INTEGER: 48 IFMIB::ifIndex.49 = INTEGER: 49 IFMIB::ifIndex.50 = INTEGER: 50 IFMIB::ifIndex.51 = INTEGER: 51 IFMIB::ifIndex.52 = INTEGER: 52 IFMIB::ifIndex.53 = INTEGER: 53 IFMIB::ifIndex.54 = INTEGER: 54 Timeout: No Response from amhs01 [amhs01:/] ========================================== 6) refrence  cpu usage was approximately 21% (of 400%)  "snmpwalk v 1 c amail amhs01 system" was fast and normal  When I executed "snmpwalk v 1 c amail amhs01 mib2", SNMPv2MIB : was fast but I was very slow from "IFMIB:".  >Comment By: Wes Hardaker (hardaker) Date: 20100831 20:36 Message: it looks like a heavily loaded machine. By chance is the routing table a big one? Try increasing the timeout for snmpwalk using the t flag too. Set it to 10 seconds and see if it comes back. It's almost certainly that there is a lot of calculations being done and it's simply taking a long time to respond.  You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=112694&aid=3055829&group_id=12694 
From: SourceForge.net <noreply@so...>  20100902 04:22:34

Bugs item #3055829, was opened at 20100830 15:48 Message generated for change (Settings changed) made by nabongwon You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=112694&aid=3055829&group_id=12694 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: agent Group: hpux >Status: Deleted Resolution: None Priority: 5 Private: No Submitted By: BongWon Nah (nabongwon) Assigned to: Nobody/Anonymous (nobody) Summary: Timeout: No Response on HPUX Initial Comment: 1) OS version : HPUX 11.31 U ia64 2) netsnmp version NETSNMP version: 5.5 Web: http://www.netsnmp.org/ Email: netsnmpcoders@... 3) startup command : just use c option /opt/iexpress/netsnmp/sbin/snmpd c /opt/iexpress/netsnmp/etc/snmpd.conf 4) snmpd.conf [amhs01:/]cat /opt/iexpress/netsnmp/etc/snmpd.conf # com2sec amail 192.168.1.0/24 amail group monitor v1 amail group monitor v2c amail view all included .1 80 access monitor "" any noauth exact all none none 5) problem When I execute "snmpwalk ifEntry", the result was very slow and finally "Timeout : No response from xxx" occured. The result is below ======================================= [amhs01:/]snmpwalk v1 c amail amhs01 ifEntry IFMIB::ifIndex.1 = INTEGER: 1 IFMIB::ifIndex.2 = INTEGER: 2 IFMIB::ifIndex.3 = INTEGER: 3 IFMIB::ifIndex.4 = INTEGER: 4 IFMIB::ifIndex.5 = INTEGER: 5 IFMIB::ifIndex.6 = INTEGER: 6 IFMIB::ifIndex.7 = INTEGER: 7 IFMIB::ifIndex.8 = INTEGER: 8 IFMIB::ifIndex.9 = INTEGER: 9 IFMIB::ifIndex.10 = INTEGER: 10 IFMIB::ifIndex.11 = INTEGER: 11 IFMIB::ifIndex.12 = INTEGER: 12 IFMIB::ifIndex.13 = INTEGER: 13 IFMIB::ifIndex.14 = INTEGER: 14 IFMIB::ifIndex.15 = INTEGER: 15 IFMIB::ifIndex.16 = INTEGER: 16 IFMIB::ifIndex.17 = INTEGER: 17 IFMIB::ifIndex.18 = INTEGER: 18 IFMIB::ifIndex.19 = INTEGER: 19 IFMIB::ifIndex.20 = INTEGER: 20 IFMIB::ifIndex.21 = INTEGER: 21 IFMIB::ifIndex.22 = INTEGER: 22 IFMIB::ifIndex.23 = INTEGER: 23 IFMIB::ifIndex.24 = INTEGER: 24 IFMIB::ifIndex.25 = INTEGER: 25 IFMIB::ifIndex.26 = INTEGER: 26 IFMIB::ifIndex.27 = INTEGER: 27 IFMIB::ifIndex.28 = INTEGER: 28 IFMIB::ifIndex.29 = INTEGER: 29 IFMIB::ifIndex.30 = INTEGER: 30 IFMIB::ifIndex.31 = INTEGER: 31 IFMIB::ifIndex.32 = INTEGER: 32 IFMIB::ifIndex.33 = INTEGER: 33 IFMIB::ifIndex.34 = INTEGER: 34 IFMIB::ifIndex.35 = INTEGER: 35 IFMIB::ifIndex.36 = INTEGER: 36 IFMIB::ifIndex.37 = INTEGER: 37 IFMIB::ifIndex.38 = INTEGER: 38 IFMIB::ifIndex.39 = INTEGER: 39 IFMIB::ifIndex.40 = INTEGER: 40 IFMIB::ifIndex.41 = INTEGER: 41 IFMIB::ifIndex.42 = INTEGER: 42 IFMIB::ifIndex.43 = INTEGER: 43 IFMIB::ifIndex.44 = INTEGER: 44 IFMIB::ifIndex.45 = INTEGER: 45 IFMIB::ifIndex.46 = INTEGER: 46 IFMIB::ifIndex.47 = INTEGER: 47 IFMIB::ifIndex.48 = INTEGER: 48 IFMIB::ifIndex.49 = INTEGER: 49 IFMIB::ifIndex.50 = INTEGER: 50 IFMIB::ifIndex.51 = INTEGER: 51 IFMIB::ifIndex.52 = INTEGER: 52 IFMIB::ifIndex.53 = INTEGER: 53 IFMIB::ifIndex.54 = INTEGER: 54 Timeout: No Response from amhs01 [amhs01:/] ========================================== 6) refrence  cpu usage was approximately 21% (of 400%)  "snmpwalk v 1 c amail amhs01 system" was fast and normal  When I executed "snmpwalk v 1 c amail amhs01 mib2", SNMPv2MIB : was fast but I was very slow from "IFMIB:".  Comment By: Wes Hardaker (hardaker) Date: 20100901 12:36 Message: it looks like a heavily loaded machine. By chance is the routing table a big one? Try increasing the timeout for snmpwalk using the t flag too. Set it to 10 seconds and see if it comes back. It's almost certainly that there is a lot of calculations being done and it's simply taking a long time to respond.  You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=112694&aid=3055829&group_id=12694 