[ net-snmp-Bugs-1000854 ] ucd-snmp-4.2.5-8.AS21.2 on Dell 6650 wrong NIC speed

[SourceForge.net <no...@so...>]

Bugs item #1000854, was opened at 2004-07-30 11:27
Message generated for change (Tracker Item Submitted) made by Item Submitter
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=112694&aid=1000854&group_id=12694

Category: agent
Group: linux
Status: Open
Resolution: None
Priority: 5
Submitted By: Nobody/Anonymous (nobody)
Assigned to: Nobody/Anonymous (nobody)
Summary: ucd-snmp-4.2.5-8.AS21.2 on Dell 6650 wrong NIC speed

Initial Comment:
We are running RedHat Linux AS 2.1 Kernel
 2.4.9-e.40smp 

> dmesg shows :
>
> Broadcom Gigabit Ethernet Driver bcm5700 with 
Broadcom NIC Extension
> (NICE) ver. 2.0.28 (11/05/01)
> eth0: Broadcom BCM5700 found at mem eff10000, IRQ 
17, node addr
> 000f1f6a3eeb
> eth0: Broadcom BCM5411 Copper transceiver found
> eth0: Scatter-gather ON, 64-bit DMA ON, Tx 
Checksum ON, Rx Checksum ON
> eth1: Broadcom BCM5700 found at mem eff00000, IRQ 
18, node addr
> 000f1f6a3eec
> eth1: Broadcom BCM5411 Copper transceiver found
> eth1: Scatter-gather ON, 64-bit DMA ON, Tx 
Checksum ON, Rx Checksum ON
> bcm5700: eth0 NIC Link is UP, 100 Mbps full duplex
> bcm5700: eth1 NIC Link is UP, 100 Mbps full duplex
> Intel(R) PRO/1000 Network Driver - version 5.2.20-k1
> Copyright (c) 1999-2003 Intel Corporation.
> eth2: Intel(R) PRO/1000 Network Connection
> eth3: Intel(R) PRO/1000 Network Connection
> e1000: eth2 NIC Link is Up 100 Mbps Full Duplex
> e1000: eth3 NIC Link is Up 100 Mbps Full Duplex

However when we look at our stats using MRTG it only 
reports all the cards at running 10 mbps although I am 
sure they are all at 100 mbps as that is the standard 
here and that is what dmesg shows.  I had also opened 
a problem with MRTG but the developer said he only 
reports what has been given him and I opened a problem 
with Dell and they just gave me some commands to 
hard-code the speed which I am not supposed to to 
here. I have all the current redhat network updates on 
and we have other systems running linux but with a 
different version on your software that are reporting 
correctly. We are running Redhat ES 30 with 
net-snmp-5.0.9-2.30E.3
working just fine. Any thoughts?
Thanks,
Tom Kunz
612-624-8086
t-...@gr...

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=112694&aid=1000854&group_id=12694