Thread: [Ndiswrapper-general] error configuring wlan0
Status: Beta
Brought to you by:
pgiri
From: Rui S. <rui...@cl...> - 2004-04-25 11:31:26
|
I have a intel wirelessBG card (centrino), and i'm using the lastes cvs (0.7) kernel is 2.6.5 here is what i get: ndiswrapper -l Installed ndis drivers: w22n51 present ok modprobe ndiswrapper dmesg ndiswrapper version 0.7 loaded ndiswrapper adding w22n51.sys PCI: Enabling device 0000:01:02.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:01:02.0 to 64 wlan0: ndiswrapper ethernet device 00:0e:35:05:00:de using driver w22n51.sys ok iwconfig wlan0 IEEE 802.11b ESSID:"" Mode:Managed Access Point: FF:FF:FF:FF:FF:FF Bit Rate:54Mb/s RTS thr:1600 B Fragment thr:2304 B Encryption key:off Power Management:off Link Quality:0/100 Signal level:24/154 Noise level:0/154 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 iwconfig wlan0 mode Managed dmesg wlan0: getting configuration failed (C0000001) not ok but it was already configured as Managed mode... iwconfig wlan0 key restricted ABCDEFGHIJ iwconfig wlan0 IEEE 802.11b ESSID:"" Mode:Managed Access Point: FF:FF:FF:FF:FF:FF Bit Rate:54Mb/s RTS thr:1600 B Fragment thr:2304 B Encryption key:ABCD-EFGH-IJ Security mode:restricted Power Management:off Link Quality:0/100 Signal level:24/154 Noise level:0/154 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ok iwconfig wlan0 essid MYNETWORK iwconfig wlan0 IEEE 802.11b ESSID:"" Mode:Managed Access Point: FF:FF:FF:FF:FF:FF Bit Rate:54Mb/s RTS thr:1600 B Fragment thr:2304 B Encryption key:ABCD-EFGH-IJ Security mode:restricted Power Management:off Link Quality:0/100 Signal level:24/154 Noise level:0/154 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 dmesg wlan0: getting configuration failed (C0000001) not ok. The ESSID string doesn't change. It is as the mode because it was already set even as "" ifconfig wlan0 up of course doesn't do anything Thanks Rui Sampaio Clix Rapidix - Aumente até 6X a velocidade da sua Internet Adira em http://acesso.clix.pt e comece logo a navegar |
From: Giridhar P. <gi...@lm...> - 2004-04-25 11:49:23
|
On Sun, 25 Apr 2004 12:21:39 +0100, "Rui Sampaio" <rui...@cl...> said: Rui> I have a intel wirelessBG card (centrino), and i'm using the Which one? 2100 or 2200? Rui> w22n51 present Is this one of the supported drivers (on 'supported chipsets' page)? If not, use one from there. Rui> wlan0: getting configuration failed (C0000001) I am not sure if this is a fatal error. Rui> not ok. The ESSID string doesn't change. It is as the mode Rui> because it was already set even as "" See the FAQ for setting essid. Does the encryption mode match with what you have on the AP? -- Giri |
From: Giridhar P. <gi...@lm...> - 2004-04-25 19:01:55
|
On Sun, 25 Apr 2004 12:21:39 +0100, "Rui Sampaio" <rui...@cl...> said: First, fix problems with your mailer so we don't get multiple mails. Rui> I have a intel wirelessBG card (centrino), and i'm using the lastes cvs (0.7) kernel is 2.6.5 Use line breaks. Rui> here is what i get: Rui> ndiswrapper -l But not that many! -- Giri |
From: Bret H. <bh...@el...> - 2004-04-25 20:55:15
|
There appears to be a mailloop on this message. I have 5 copies of this message. Is anyone else seeing this? Bret On Sun, 2004-04-25 at 06:21, Rui Sampaio wrote: > I have a intel wirelessBG card (centrino), and i'm using the lastes cvs (= 0.7) kernel is 2.6.5 >=20 >=20 >=20 > here is what i get: >=20 >=20 >=20 >=20 >=20 > ndiswrapper -l >=20 > Installed ndis drivers: >=20 > w22n51 present >=20 >=20 >=20 > ok >=20 >=20 >=20 > modprobe ndiswrapper >=20 > dmesg >=20 > ndiswrapper version 0.7 loaded >=20 > ndiswrapper adding w22n51.sys >=20 > PCI: Enabling device 0000:01:02.0 (0000 -> 0002) >=20 > PCI: Setting latency timer of device 0000:01:02.0 to 64 >=20 > wlan0: ndiswrapper ethernet device 00:0e:35:05:00:de using driver w22n51.= sys >=20 >=20 >=20 > ok >=20 >=20 >=20 > iwconfig >=20 > wlan0 IEEE 802.11b ESSID:"" =20 >=20 > Mode:Managed Access Point: FF:FF:FF:FF:FF:FF Bit Rate:54Mb/s = =20 >=20 > RTS thr:1600 B Fragment thr:2304 B =20 >=20 > Encryption key:off >=20 > Power Management:off >=20 > Link Quality:0/100 Signal level:24/154 Noise level:0/154 >=20 > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >=20 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >=20 >=20 >=20 > iwconfig wlan0 mode Managed >=20 > dmesg >=20 > wlan0: getting configuration failed (C0000001) >=20 >=20 >=20 > not ok but it was already configured as Managed mode... >=20 >=20 >=20 > iwconfig wlan0 key restricted ABCDEFGHIJ >=20 > iwconfig >=20 > wlan0 IEEE 802.11b ESSID:"" =20 >=20 > Mode:Managed Access Point: FF:FF:FF:FF:FF:FF Bit Rate:54Mb/s = =20 >=20 > RTS thr:1600 B Fragment thr:2304 B =20 >=20 > Encryption key:ABCD-EFGH-IJ Security mode:restricted >=20 > Power Management:off >=20 > Link Quality:0/100 Signal level:24/154 Noise level:0/154 >=20 > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >=20 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >=20 >=20 >=20 > ok >=20 >=20 >=20 > iwconfig wlan0 essid MYNETWORK >=20 > iwconfig >=20 > wlan0 IEEE 802.11b ESSID:"" =20 >=20 > Mode:Managed Access Point: FF:FF:FF:FF:FF:FF Bit Rate:54Mb/s = =20 >=20 > RTS thr:1600 B Fragment thr:2304 B =20 >=20 > Encryption key:ABCD-EFGH-IJ Security mode:restricted >=20 > Power Management:off >=20 > Link Quality:0/100 Signal level:24/154 Noise level:0/154 >=20 > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >=20 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >=20 > dmesg >=20 > wlan0: getting configuration failed (C0000001) >=20 >=20 >=20 > not ok. The ESSID string doesn't change. It is as the mode because it was= already set even as "" >=20 >=20 >=20 > ifconfig wlan0 up >=20 > of course doesn't do anything >=20 >=20 >=20 > Thanks >=20 > Rui Sampaio >=20 > Clix Rapidix - Aumente at=E9 6X a velocidade da sua Internet > Adira em http://acesso.clix.pt e comece logo a navegar >=20 >=20 >=20 >=20 > ------------------------------------------------------- > This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek > For a limited time only, get FREE Ground shipping on all orders of $35 > or more. Hurry up and shop folks, this offer expires April 30th! > http://www.thinkgeek.com/freeshipping/?cpg=3D12297 > _______________________________________________ > Ndiswrapper-general mailing list > Ndi...@li... > https://lists.sourceforge.net/lists/listinfo/ndiswrapper-general |
From: <az...@se...> - 2004-04-25 21:54:53
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Bret Hughes wrote: | There appears to be a mailloop on this message. I have 5 copies of this | message. Is anyone else seeing this? Yes, same here, but I think it's 6 now ;) Regads, - -- ~ .''`. Torbj=F6rn Svensson, azoff (at) se (dot) linux (dot) org ~ : :' : 7EB9 2DC5 61AE DAB5 7099 BAC6 798E E39A DBDB 0CFD ~ `. `' http://azoff.homeip.net:8080/ | http://azoff.tty0.org ~ `-- http://www.se.linux.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFAjDJleY7jmtvbDP0RAr4ZAJ9dR2bX6+YegUVWUDfrp/NgJrfOkACdHpn0 KKr15W9LG9TqZXnaoFATqxI=3D =3DpgP5 -----END PGP SIGNATURE----- |