#106 fuppes WebUI Configuration: vlan interfaces do not show up

9.1.0.1
open
zoon01
fuppes (2)
1
2013-05-23
2013-05-23
Rainer
No

Hi,
we have a server here with two NICs with are bonded using a LACP lagg0
interface. On top of that we have 2 VLANs.
In the Interface drop down of the configuration page of the fuppes service only
em0,em1 and lagg0 show up. Only lagg0 has an IP assigned (dummy IP due to
another bug).
1) Only interfaces with an IP assigned should show up
2) If you require to assign more than one interface - how can that be done (in
our case vlan0 and vlan1)?

Thanks
Rainer

NAS4Free 9.1.0.1 (revision 724) x64-embedded
PTLTD RSDT Intel(R) Xeon(R) CPU E5345 @ 2.33GHz 33536MiB RAM

Intel 63XXESB USB 2.0 controller bus=1 hubaddr=1 port=3 devaddr=2
interface=0 Intel 631XESB/632XESB/3100 USB controller USB-1 Intel
631XESB/632XESB/3100 USB controller USB-2 Intel 631XESB/632XESB/3100
USB controller USB-3 PLIP network interface bus=1 hubaddr=2 port=0
devaddr=2 interface=0 bus=1 hubaddr=2 port=0 devaddr=2 interface=1

em0: flags=8843 metric 0 mtu 1500
options=4219b
ether 00:30:48:35:44:88
inet6 fe80::230:48ff:fe35:4488%em0 prefixlen 64 scopeid 0x1
nd6 options=29
media: Ethernet autoselect (1000baseT )
status: active
em1: flags=8843 metric 0 mtu 1500
options=4219b
ether 00:30:48:35:44:88
inet6 fe80::230:48ff:fe35:4489%em1 prefixlen 64 scopeid 0x2
nd6 options=29
media: Ethernet autoselect (1000baseT )
status: active
plip0: flags=8810 metric 0 mtu 1500
nd6 options=29
ipfw0: flags=8801 metric 0 mtu 65536
nd6 options=29
lo0: flags=8049 metric 0 mtu 16384
options=600003
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
inet 127.0.0.1 netmask 0xff000000
nd6 options=21
lagg0: flags=8843 metric 0 mtu 1500
options=4219b
ether 00:30:48:35:44:88
inet 10.1.1.1 netmask 0xffffffff broadcast 10.1.1.1
nd6 options=29
media: Ethernet autoselect
status: active
laggproto lacp lagghash l2,l3,l4
laggport: em1 flags=1c
laggport: em0 flags=1c
vlan0: flags=8843 metric 0 mtu 1500
options=103
ether 00:30:48:35:44:88
inet 10.20.30.150 netmask 0xffffff00 broadcast 10.20.30.255
nd6 options=29
media: Ethernet autoselect
status: active
vlan: 30 parent interface: lagg0
vlan1: flags=8843 metric 0 mtu 1500
options=103
ether 00:30:48:35:44:88
inet 192.168.0.150 netmask 0xfffffe00 broadcast 192.168.1.255
nd6 options=29
media: Ethernet autoselect
status: active
vlan: 2020 parent interface: lagg0

Discussion