Learn how easy it is to sync an existing GitHub or Google Code repo to a SourceForge project! See Demo

Close

Cant boot my MVP

MythTV
Neeesat
2008-12-07
2013-06-03
  • Neeesat
    Neeesat
    2008-12-07

    I have download latest dongle and I have install dhcp3-server and atftpd

    My syslog says:

    Dec  7 20:34:39 htpc atftpd[7218]: Serving vomp-dongle.bin to 192.168.0.57:3909
    Dec  7 20:34:39 htpc dhcpd: DHCPDISCOVER from 00:0d:fe:00:xx:xx via eth1
    Dec  7 20:34:39 htpc dhcpd: DHCPOFFER on 192.168.0.57 to 00:0d:fe:00:xx:xx via eth1
    Dec  7 20:34:39 htpc atftpd[7218]: Serving vomp-dongle.bin to 192.168.0.57:3909
    Dec  7 20:34:39 htpc dhcpd: DHCPDISCOVER from 00:0d:fe:00:xx:xx via eth1
    Dec  7 20:34:39 htpc dhcpd: DHCPOFFER on 192.168.0.57 to 00:0d:fe:00:xx:xx via eth1
    Dec  7 20:34:39 htpc atftpd[7218]: Serving vomp-dongle.bin to 192.168.0.57:3909
    Dec  7 20:34:39 htpc dhcpd: DHCPDISCOVER from 00:0d:fe:00:xx:xx via eth1
    Dec  7 20:34:39 htpc dhcpd: DHCPOFFER on 192.168.0.57 to 00:0d:fe:00:xx:xx via eth1
    Dec  7 20:34:39 htpc atftpd[7218]: Serving vomp-dongle.bin to 192.168.0.57:3909

    My dhcpd.conf:

    option domain-name              "local";
    option subnet-mask              255.255.255.0;
    #option domain-name-servers 63.240.76.4, 204.127.198.4;

    allow bootp;
    allow booting;

    #option ip-forwarding    false;  # No IP forwarding
    #option mask-supplier    false;  # Don't respond to ICMP Mask req

    subnet 192.168.0.0 netmask 255.255.255.0 {
      option routers        192.168.0.1;
      range 192.168.0.100 192.168.0.250;
    }

    group {
      next-server 192.168.0.240;          # IP address of your TFTP server

      host mvp { # NOTE: Change the hardware ethernet to the MAC address of your actual MVP
               hardware ethernet 00:0d:fe:00:xx:xx;
               fixed-address 192.168.0.57;
               filename "vomp-dongle.bin";
               option root-path "/home/mvp,rsize=4096,wsize=4096,nolock";
      }

    }

    My MVP stays on booting with one steady light and two flashing.

    Any idea please?

     
    • Neeesat
      Neeesat
      2008-12-07

      where 192.168.0.240 is my mythtv server

       
    • Neeesat
      Neeesat
      2008-12-11

      I have manage to make it boot by using tftpd and dhcp3-server instead of atftp. 

      The problem now is when I try to see recordings mvpmc crashes and reboots. Also it crash mythbackend when I try to watch livetv.

       
      • Tom Metro
        Tom Metro
        2009-01-05

        Neeesat wrote:
        > ...when I try to see recordings mvpmc crashes and reboots...

        Sorry for the delay in responding. As you can see, this forum doesn't get a lot of traffic. The community primarily uses the mailing lists.

        I don't know the answer to the issue you are seeing, but similar symptoms were reported on the mvpmc users mailing list not long ago. You might be able to find the answer by reviewing the archives (at Nabble; see the wiki page on the mailing lists), or by posting your question there, where it will be seen by many more people.

        -Tom