Re: [Mlt-devel] test case 2.4 problem and no video when playing back kino files

[<r....@t-...>]

hi, good news .... it works now!
don't know exactly why, but anyhow, I will tell you what I did ...
I decided to make a new build of the sources (no fresh checkout), so I made a 
'make clean' followed by the well known './configure && make && make install' 
procedure. 

greetings
reinhard



On Thursday 13 January 2005 14:09, charlie wrote:
> On Thu, 2005-01-13 at 13:37 +0100, Reinhard Amersberger wrote:
> > > Think the issue is just in the uadd case - try a simpler:
> > >
> > > uadd sdl
> >
> > no, don't work.
> > the output/result is the same
>
> Odd. Is this an avi or dv file? I would advise that you use raw dv if
> possible - you can export it from kino as a raw dv if necessary, or you
> can use the kino smilutils (smil2raw <your-file>.avi > <your-file>.dv).
>
> Can you also try running the following from the command line:
>
> inigo <your-file>
>
> this should be equivalent to 'uadd sdl, play u0 <your-file>' in dvcp.
>
> If the inigo case works, when you inject it into shotcut-nle, does it
> still work? Normally this would be:
>
> shotcut-inject --port=5260 <your-file>
>
> Hope that helps,
>
> Charlie
>
>
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> Mlt-devel mailing list
> Mlt...@li...
> https://lists.sourceforge.net/lists/listinfo/mlt-devel