From: Craig <ar...@gm...> - 2014-08-21 00:14:22
|
Here is the output from 'set relay to momentary c' (output is in reverse chronicle order): 08/20/2014 07:57:58 PM [Insteon::IOLinc] Acknowledged flag set for $io_garage_door3 08/20/2014 07:57:58 PM [Insteon::BaseObject] DEBUG4: $io_garage_door3->default_hop_count()=2 :: hop_array[]=2222221222 08/20/2014 07:57:58 PM [Insteon::BaseObject] DEBUG3: Adding hop count of 2 to hop_array of $io_garage_door3 08/20/2014 07:57:58 PM [Insteon::BaseInterface] DEBUG3: PLM command:insteon_received; Device command:set_operating_flags; type:direct; group: 08/20/2014 07:57:58 PM [Insteon_PLM] DEBUG4: PLM Command: (0250) insteon_received From Address: 1c:ff:94 To Address: 1a:76:8b Message Flags: 22 Message Type: (001) ACK of Direct Message Message Length: (0) Standard Length Hops Left: 0 Max Hops: 2 Insteon Message: 2014 Cmd 1: (20) Set Operating Flags Cmd 2: (14) 08/20/2014 07:57:58 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02501cff941a768b222014 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM acknowledge: obj=$io_garage_door3; command=set_operating_flags; extra=14 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4: PLM Command: (0262) insteon_send To Address: 1c:ff:94 Message Flags: 0a Message Type: (000) Direct Message Message Length: (0) Standard Length Hops Left: 2 Max Hops: 2 Insteon Message: 2014 Cmd 1: 20 Insteon command not decoded Cmd 2: 14 PLM Response: (06) ACK 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02621cff940a201406 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4: PLM Command: (0262) insteon_send To Address: 1c:ff:94 Message Flags: 0a Message Type: (000) Direct Message Message Length: (0) Standard Length Hops Left: 2 Max Hops: 2 Insteon Message: 2014 Cmd 1: 20 Insteon command not decoded Cmd 2: 14 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Sending PLM raw data: 02621cff940a2014 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG2: Sending obj=$io_garage_door3; command=set_operating_flags; extra=14 incurred delay of 0.89 seconds; starting hop-count: 2 08/20/2014 07:57:57 PM [Insteon::IOLinc] Acknowledged flag set for $io_garage_door3 08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG4: $io_garage_door3->default_hop_count()=2 :: hop_array[]=2222212221 08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG3: Adding hop count of 2 to hop_array of $io_garage_door3 08/20/2014 07:57:57 PM [Insteon::BaseInterface] DEBUG3: PLM command:insteon_received; Device command:set_operating_flags; type:direct; group: 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4: PLM Command: (0250) insteon_received From Address: 1c:ff:94 To Address: 1a:76:8b Message Flags: 22 Message Type: (001) ACK of Direct Message Message Length: (0) Standard Length Hops Left: 0 Max Hops: 2 Insteon Message: 2013 Cmd 1: (20) Set Operating Flags Cmd 2: (13) 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02501cff941a768b222013 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM acknowledge: obj=$io_garage_door3; command=set_operating_flags; extra=13 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4: PLM Command: (0262) insteon_send To Address: 1c:ff:94 Message Flags: 0a Message Type: (000) Direct Message Message Length: (0) Standard Length Hops Left: 2 Max Hops: 2 Insteon Message: 2013 Cmd 1: 20 Insteon command not decoded Cmd 2: 13 PLM Response: (06) ACK 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02621cff940a201306 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4: PLM Command: (0262) insteon_send To Address: 1c:ff:94 Message Flags: 0a Message Type: (000) Direct Message Message Length: (0) Standard Length Hops Left: 2 Max Hops: 2 Insteon Message: 2013 Cmd 1: 20 Insteon command not decoded Cmd 2: 13 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Sending PLM raw data: 02621cff940a2013 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG2: Sending obj=$io_garage_door3; command=set_operating_flags; extra=13 incurred delay of 0.44 seconds; starting hop-count: 2 08/20/2014 07:57:57 PM [Insteon::BaseInterface] WARN! Dropped duplicate incoming message 1cff941a768b222006, from $io_garage_door3 08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG4: $io_garage_door3->default_hop_count()=2 :: hop_array[]=2222122212 08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG3: Adding hop count of 2 to hop_array of $io_garage_door3 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4: PLM Command: (0250) insteon_received From Address: 1c:ff:94 To Address: 1a:76:8b Message Flags: 22 Message Type: (001) ACK of Direct Message Message Length: (0) Standard Length Hops Left: 0 Max Hops: 2 Insteon Message: 2006 Cmd 1: (20) Set Operating Flags Cmd 2: (06) 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02501cff941a768b222006 08/20/2014 07:57:57 PM [Insteon::IOLinc] Acknowledged flag set for $io_garage_door3 08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG4: $io_garage_door3->default_hop_count()=2 :: hop_array[]=2221222123 08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG3: Adding hop count of 2 to hop_array of $io_garage_door3 08/20/2014 07:57:57 PM [Insteon::BaseInterface] DEBUG3: PLM command:insteon_received; Device command:set_operating_flags; type:direct; group: 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4: PLM Command: (0250) insteon_received From Address: 1c:ff:94 To Address: 1a:76:8b Message Flags: 22 Message Type: (001) ACK of Direct Message Message Length: (0) Standard Length Hops Left: 0 Max Hops: 2 Insteon Message: 2006 Cmd 1: (20) Set Operating Flags Cmd 2: (06) 08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02501cff941a768b222006 08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG3: Received PLM acknowledge: obj=$io_garage_door3; command=set_operating_flags; extra=06 08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG4: PLM Command: (0262) insteon_send To Address: 1c:ff:94 Message Flags: 0a Message Type: (000) Direct Message Message Length: (0) Standard Length Hops Left: 2 Max Hops: 2 Insteon Message: 2006 Cmd 1: (20) Set Operating Flags Cmd 2: (06) Deveice Dependent PLM Response: (06) ACK 08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02621cff940a200606 08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG4: PLM Command: (0262) insteon_send To Address: 1c:ff:94 Message Flags: 0a Message Type: (000) Direct Message Message Length: (0) Standard Length Hops Left: 2 Max Hops: 2 Insteon Message: 2006 Cmd 1: (20) Set Operating Flags Cmd 2: (06) Deveice Dependent 08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG3: Sending PLM raw data: 02621cff940a2006 08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG2: Sending obj=$io_garage_door3; command=set_operating_flags; extra=06 incurred delay of 0.00 seconds; starting hop-count: 2 08/20/2014 07:57:56 PM Running: io garage door3 set relay to momentary c ------------------------------------------ and the output from' print settings to log': ------------------------------------------ 08/20/2014 08:01:38 PM [Insteon::IOLinc] Device Settings are: Program Lock: Off; Transmit Led: On; Relay Linked: Off; X10 Reverse: Off; Trigger Reverse: On; Momentary_A: On. 08/20/2014 08:01:38 PM [Insteon::BaseInterface] DEBUG3: PLM command:insteon_received; Device command:get_operating_flags; type:direct; group: 08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG4: PLM Command: (0250) insteon_received From Address: 1c:ff:94 To Address: 1a:76:8b Message Flags: 22 Message Type: (001) ACK of Direct Message Message Length: (0) Standard Length Hops Left: 0 Max Hops: 2 Insteon Message: 1f4a Cmd 1: (1f) Get Operating Flags Cmd 2: (4a) Config Flags 08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02501cff941a768b221f4a 08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG3: Received PLM acknowledge: obj=$io_garage_door3; command=get_operating_flags 08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG4: PLM Command: (0262) insteon_send To Address: 1c:ff:94 Message Flags: 0a Message Type: (000) Direct Message Message Length: (0) Standard Length Hops Left: 2 Max Hops: 2 Insteon Message: 1f00 Cmd 1: (1f) Get Operating Flags Cmd 2: (00) Request Flags PLM Response: (06) ACK 08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02621cff940a1f0006 08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG4: PLM Command: (0262) insteon_send To Address: 1c:ff:94 Message Flags: 0a Message Type: (000) Direct Message Message Length: (0) Standard Length Hops Left: 2 Max Hops: 2 Insteon Message: 1f00 Cmd 1: (1f) Get Operating Flags Cmd 2: (00) Request Flags 08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG3: Sending PLM raw data: 02621cff940a1f00 08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG2: Sending obj=$io_garage_door3; command=get_operating_flags incurred delay of 0.00 seconds; starting hop-count: 2 08/20/2014 08:01:38 PM Running: io garage door3 print settings to log Thank you for looking into this. Very small (tiny) cosmetic error in the code. 'Deveice' (see hilight above) -Craig On Tue, Aug 19, 2014 at 4:09 PM, Kevin Robert Keegan <ke...@kr...> wrote: > It seems to be working for me. > > Please set your insteon debugging level to 4, and then resend your > print.log. > > > On Mon, Aug 18, 2014 at 7:13 PM, Craig <ar...@gm...> wrote: > >> I am having a little issue setting my garage door IO Link to momentary C >> mode. Here is the output when setting it: >> >> 08/18/2014 09:58:35 PM [Insteon::IOLinc] Acknowledged flag set for >> $io_garage_door3 >> 08/18/2014 09:58:35 PM [Insteon::IOLinc] Acknowledged flag set for >> $io_garage_door3 >> 08/18/2014 09:58:34 PM [Insteon::IOLinc] Acknowledged flag set for >> $io_garage_door3 >> 08/18/2014 09:58:34 PM Running: io garage door3 set relay to momentary c >> >> But when I check the settings by running print settings to log, I get: >> >> 08/18/2014 10:03:22 PM [Insteon::IOLinc] Device Settings are: Program >> Lock: Off; Transmit Led: On; Relay Linked: Off; X10 Reverse: Off; Trigger >> Reverse: On; Momentary_A: On. >> 08/18/2014 10:03:22 PM Running: io garage door3 print settings to log >> >> It shows Momentary_A whatever I set it to. It also doesn't seem to be >> working correctly in C mode (as best I can tell). Any ideas? I am running >> a current (fairly recent) master version of the Insteon code. >> >> -- >> -Craig >> >> >> ------------------------------------------------------------------------------ >> >> ________________________________________________________ >> To unsubscribe from this list, go to: >> https://lists.sourceforge.net/lists/listinfo/misterhouse-users >> >> >> > -- -Craig |