From: Neil W. <ne...@nw...> - 2004-10-23 23:48:56
|
Hi, I have had the same experience with some USB devices as well, some don't have handshaking capability. I have my W800 wired up with GND, TX & RX only. No handshaking lines and it goes perfectly. My CM11 is also wired up with only GND, TX & RX. Cheers, Neil. > -----Original Message----- > From: Neil Cherry [mailto:nc...@co...] > Sent: Sunday, 24 October 2004 4:46 AM > To: mis...@li... > Subject: Re: [misterhouse-users] w800 error > > > WK wrote: > > Problem solved. > > I swapped the cm11 and w800 (w800 connected to ttyS0 and > cm11 connected > > to ttyUSB0) and problem is resolved. It's wierd. > > It may not be that weird. Some of the USB serial port do not support > hardware handshaking. The CM11A doesn't require hardware handshaking. > The W800 might, anyone know if it does? > > -- > Linux Home Automation Neil Cherry nc...@co... > http://home.comcast.net/~ncherry/ (Text only) > http://hcs.sourceforge.net/ (HCS II) > http://linuxha.blogspot.com/ My HA Blog > > > ------------------------------------------------------- > This SF.net email is sponsored by: IT Product Guide on > ITManagersJournal > Use IT products in your business? Tell us what you think of > them. Give us > Your Opinions, Get Free ThinkGeek Gift Certificates! Click to > find out more > http://productguide.itmanagersjournal.com/guidepromo.tmpl > ________________________________________________________ > To unsubscribe from this list, go to: > http://sourceforge.net/mail/?group_id=1365 > > > > |