Re: [misterhouse-users] serial LCD project?

[Damon H. <mdh...@un...>]

Cool deal.. I'd like the extra info on the LCD to the serial port
thing.. also for the weeder I/O R/F LCD stuff is the weeder I/O board a
necessary part of the setup? Doesn't the weeder board basically connect
to the serial port on one end and have a bunch of digital I/O pins and
Analog pins on the other? If so is the protocol that it uses difficult
to replicate.. (Did I mention I have some PICs lying around here as
well??) I'm trying NOT to buy stuff.. it's a hard thing to resist.

	Looking forward to the LCD info,
				Damon Hopkins

Ian Davidson wrote:
> 
> Hi Damon
> 
> Yes with MH 2.49 the wireless lcd remote works with no additions. The lack
> of details is my fault, lack of time. However it is now finished, and works
> fine. I will try to have all the info detailed by this weekend, next at the
> very latest. As soon as it is done I'll post a URL to the list & anyone
> wanting the info, circuit diagrams etc can just grab them from there. It
> basically turns a serial port into a rf link to what ever you want. It sends
> and receives data to the lcd remote and also sends command codes to twelve
> wireless sockets I have. I do not use X10 at all. I have two digital & one
> analogue weeder card and everything else will be via RF. When this is
> finished I want to add some keyfob's to activate MH as a full alarm system,
> I already have all the alarm sensors wired to both the normal alarm panel
> and to the weeder cards so MH knows exactly which sensor is active.
> 
> I should mention that if anybody wants you can also use it to add an LCD
> directly to a serial port, If that's what anybody requires then I'll try to
> show the different options available in the doc's.
> 
> Ian
> 
> ----- Original Message -----
> From: "Damon Hopkins" <mdh...@un...>
> To: "Misterhouse Users" <mis...@li...>
> Sent: Tuesday, April 17, 2001 5:33 AM
> Subject: [misterhouse-users] serial LCD project?
> 
> > I remember seeing a post that Ian had a serial LCD wireless project
> > going on. I've looked through the threads but all I can find is there is
> > a mention and basic description about the project? any more info? I
> > noticed there is a new LCD.pm file are there some specs or something I
> > can read up on so I can connect an LCD to my PC and use it w/ MH I have
> > a few Pics and 16x2 LCD's lying around here and I'm interested in
> > extending my MH control to other areas of the house. someone have a
> > schematic or something??
> >
> >
> > Damon Hopkins
> >
> > ________________________________________________________
> > To unsubscribe from this list, go to:
> http://sourceforge.net/mail/?group_id=1365
> >
> >
> 
> ________________________________________________________
> To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365