Diff of /miniupnpd.conf [000000] .. [f557f8] Maximize Restore

  Switch to side-by-side view

--- a
+++ b/miniupnpd.conf
@@ -0,0 +1,73 @@
+# WAN network interface
+ext_ifname=eth0
+# if the WAN interface has several IP addresses, you
+# can specify the one to use below
+#ext_ip=
+
+# LAN network interfaces IPs / networks
+# there can be multiple listening ips for SSDP traffic.
+# should be under the form nnn.nnn.nnn.nnn/nn
+# HTTP is available on all interfaces
+#listening_ip=192.168.0.1/24
+#listening_ip=10.1.11.65/24
+#listening_ip=192.168.10.112
+#listening_ip=
+# port for HTTP (descriptions and SOAP) traffic
+port=5555
+
+# enable UPNP support (default is yes)
+enable_upnp=yes
+
+media_dir=/opt
+#media_dir=/c/DLNA
+
+# lease file location
+#lease_file=/var/log/upnp.leases
+
+# bitrates reported by daemon in bits per second
+bitrate_up=1000000
+bitrate_down=10000000
+
+# "secure" mode : UPnP client are allowed to add mappings only
+# to their IP
+secure_mode=no
+
+# default presentation url is http address on port 80
+#presentation_url=http://www.mylan/index.php
+
+# report system uptime instead of daemon uptime
+system_uptime=no
+
+# notify interval in seconds. default is 30 seconds.
+notify_interval=900
+
+# unused rules cleaning.
+# never remove any rule before this threshold for the number
+# of redirections is exceeded. default to 20
+#clean_ruleset_threshold=10
+# clean process work interval in seconds. default to 0 (disabled).
+# a 600 seconds (10 minutes) interval makes sense
+clean_ruleset_interval=600
+
+# log packets in pf
+#packet_log=no
+
+# ALTQ queue in pf
+# filter rules must be used for this to be used.
+# compile with PF_ENABLE_FILTER_RULES (see config.h file)
+#queue=queue_name1
+
+# tag name in pf
+#tag=tag_name1
+
+# make filter rules in pf quick or not. default is yes
+# active when compiled with PF_ENABLE_FILTER_RULES (see config.h file)
+#quickrules=no
+
+# uuid : generate your own with "make genuuid"
+uuid=fc4ec57e-b051-11db-88f8-0060085db3f6
+
+# serial and model number the daemon will report to clients
+# in its XML description
+serial=12345678
+model_number=1