[Madwifi-users] How to connect to a wifi network with wpa

[Michael W. <mic...@gm...>]

Hi everybody,

I have a hopefully simple question. First I could not get my onboard
atheros-card to work. I solved this with the ticket #1192. Now my card
is working, at least I can see my router. This is configured for use
with wpa. 
I have read the how-to on madwifi.org and compiled wpa_supplicant.

When I now try to start wpa_supplicant I get

root@C3PO:/etc# wpa_supplicant -w -Dwext -iath0
-c/etc/wpa_supplicant.conf Associated with 00:00:00:00:00:00
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Associated with 00:1c:df:c4:58:19
WPA: CCMP is used, but EAPOL-Key descriptor version (1) is not 2.
WPA: CCMP is used, but EAPOL-Key descriptor version (1) is not 2.
WPA: CCMP is used, but EAPOL-Key descriptor version (1) is not 2.
WPA: CCMP is used, but EAPOL-Key descriptor version (1) is not 2.
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Associated with 00:1c:df:c4:58:19
WPA: CCMP is used, but EAPOL-Key descriptor version (1) is not 2.
WPA: CCMP is used, but EAPOL-Key descriptor version (1) is not 2.
WPA: CCMP is used, but EAPOL-Key descriptor version (1) is not 2.
WPA: CCMP is used, but EAPOL-Key descriptor version (1) is not 2.
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Trying to associate with 00:1c:df:c4:58:19 (SSID='yedinet' freq=2412
MHz) Associated with 00:1c:df:c4:58:19
WPA: Key negotiation completed with 00:1c:df:c4:58:19 [PTK=TKIP
GTK=TKIP] CTRL-EVENT-CONNECTED - Connection to 00:1c:df:c4:58:19
completed (auth) [id=0 id_str=]

I think the last message is ok, but ifconfig shows no ip-adress at ath0.

Using wpa_gui I get 
yoda@C3PO:~$ wpa_gui
Failed to open control connection to wpa_supplicant.
PING failed - trying to reconnect

nevertheless trying to add my network I get the message "Failed to
enable network in wpa_supplicant configuration"

What can I do?

Regards,

Michael