I did AP mode in MadWiFi because compat-driver does not support AP mode.
wlanconfig wlan0 create wlandev wifi0 wlanmode ap
iwconfig wlan0 essid "MadWiFi" channel 161
brctl addbr br0
brctl addif br0 eth2(active ethernet)
brctl addif br0 wlan0 // actually, I did "brctl addif br0" according to
MadWiFi user-manual, it didn'y work.
brctl serfd br0 1
ifconfig wlan0 up
ifconfig eth2 up
ifconfig br0 [ip address] up
then I did connect my laptop to AP(mad-wifi). it was good operation!!
BUT the connection was failed in just a moment.
so, I saw net-dev status using "ifconfig".
by the way, wlan0 and wifi0-00 disappeared. -.-;; why?
Have a Wonderful Day~~!!
M.Sc 김영환 (James-Youngwhan Kim)
HTVC 3106 KAIST, 373-1 Guseong-dong, Yuseong-gu,
Daejon, Republic of Korea
From: Luis R. Rodriguez <mcgrof@gm...> - 2008-07-29 04:59:54
2008/7/28 김영환 <cs010101@...>:
> I did AP mode in MadWiFi because compat-driver does not support AP mode.
Please keep MadWifi Binary HAL based e-mails away from linux-wireless.
Also you cross posted to hostapd too!
/me digs in 9-inch Rambo knife