Hi,

 

In my experience the stuck beacon problem is normally caused by interference.

Due to the CCA (clear channel assessment) the AP may be unable to transmit anything (including beacons) for a period of time hence the stuck beacon will occur.

The easiest solution is to try a different frequency band.

 

Brett

 


From: Poonam2 Gupta [mailto:poonam2.gupta@aricent.com]
Sent: Saturday, 30 October 2010 4:07 PM
To: madwifi-devel@lists.sourceforge.net
Subject: [Madwifi-devel] Rgd beacon stuck

 

Hi,

 

we are using madwifi driver for access side networking and infra BSS networking. we do face a beacon stuck problem when we have a HOSTAP mode. can you pls give us pointers? how should be tackle this problem?

 

Regards

Poonam

 


"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."