Hi,

I've been trying to setup an access point on Fedora 6 using the latest Madwifi release (0.9.4).

Here are the commands that I run as root:

wlanconfig ath0 destory
wlanconfig ath0 create wlandev wifi0 wlanmode ap
ifconfig ath0 inet 1.1.1.1 netmask 255.255.255.0 up
iwconfig ath0 essid MY_AP
iwconfig ath0 channel 6

When I use iwconfig ath0 channel 6, my OS crashes. I'm using Fedora 6, but also when I use Ubuntu Hardy.

I'm using a Desktop to set this up, and it has an Atheros AR5212 802.11abg NIC (rev 01)

I see the beacons. If I try to connect, it does not associate with the AP and connects to my default network.
I did not find anything on the Madwifi site to setup the ap using the command line prompt. The documentation was only to create the scripts and enable the ap to start when the computer starts.

I know that switching the channel creates a deadlock, but if I don't set a channel and use the default set channel, can I connect to the AP?

I just want a simple AP connection without any encryption.

This is everything I do when I try to set it up:

[root@OttawaWater]# wlanconfig ath0 destroy
[root@OttawaWater]# wlanconfig ath0 create wlandev wifi0 wlanmode ap
ath0
[root@OttawaWater]# ifconfig ath0 inet 1.1.1.1 netmask 255.255.255.0 up
[root@OttawaWater]# iwconfig ath0 essid MY_AP
[root@OttawaWater]# iwconfig ath0
ath0      IEEE 802.11g  ESSID:"MY_AP"
          Mode:Master  Frequency:2.417 GHz  Access Point: 00:0F:66:18:F2:01
          Bit Rate:0 kb/s   Tx-Power:16 dBm   Sensitivity=1/1
          Retry:off   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=0/70  Signal level=-92 dBm  Noise level=-92 dBm
          Rx invalid nwid:3  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

[root@OttawaWater]# ifconfig ath0
ath0      Link encap:Ethernet  HWaddr 00:0F:66:18:F2:01
          inet addr:1.1.1.1  Bcast:1.1.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20f:66ff:fe19:f642/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:160 (160.0 b)

Thanks for your help.