From: Bradley W. <mod...@ya...> - 2007-06-14 01:17:00
|
I wanted to post a followup that I did get OSX booting just fine with MOL. However OS9 discs still won't boot. When I insert the disc and run the startmol --cdboot command, for a brief moment the MOL logo appears and then everything goes to that light gray color, and hangs there. For a brief moment the cd drive light comes on indicating activity but it too stops. Ideas? ----- Original Message ---- From: Bradley Walker <mod...@ya...> To: mac...@li... Sent: Wednesday, June 13, 2007 8:25:41 PM Subject: Re: [Mac-on-linux-users] Ubuntu 7.04 & MOL issue I did want to post that I've made a little headway... I tried using the following two lines for devices: blkdev: /dev/hdc -cd blkdev: /media/os9 -rw #which I mounted from /dev/hda5 Now when I run startmol --cdboot I get the tan screen with the MOL logo (penguin hugging the apple) and it freezes there. I can hear the CD spin up... but nothing happens. After pressing Atl-Ctrl-F7 to kick out of the screen, the terminal window shows: root@UbuntuPPC7:/dev# startmol --cdboot Mac-on-Linux 0.9.72 [Jun 12 2007 00:36] Copyright (C) 1997-2004 Samuel Rydh Starting MOL session 0 Running in PowerPC 7400 mode, 256 MB RAM Timebase: 24.90 MHz, Bus: 99.63 MHz, Clock: 450 MHz Using USB mouse on /dev/input/mice OHCI USB controller registered Fullscreen video on VT 9. Could not open '/var/local/mol/console.kbd' Cache enabled for console-video Video driver(s): [console_video] 640* 480, depth 8,15,32 { 59.9, 72.1, 74.9, 89.9, 99.7 } Hz 640* 480, depth 8,15 { 116.6 } Hz 800* 600, depth 8,15,32 { 56.2, 60.3, 70.0, 72.1, 74.9, 89.9 } Hz 800* 600, depth 8,15 { 94.8 } Hz 800* 600, depth 8,15,32 { 99.9 } Hz 1024* 768, depth 8,15,32 { 0.0, 60.0, 70.0 } Hz 1024* 768, depth 8,15 { 74.8 } Hz 1152* 768, depth 8,15,32 { 54.7 } Hz 1280* 854, depth 8,15,32 { 60.0 } Hz 1152* 864, depth 8,15,32 { 59.9 } Hz 1280*1024, depth 8,15,32 { 60.0, 60.0 } Hz 1600*1200, depth 8,15,32 { 59.9 } Hz Autoswitching to console OSS sound driver CD /dev/hdc CD/DVD <read-only> ------ ----> (disk_open) Opening /media/os9: Is a directory SCSI devices: CD-SCSI disabled (CD-booting) <No SCSI Devices> >> ============================================================= >> Mac-on-Linux OpenFirmware 0.9.70 >> Boot Disk: /pci/pci-bridge/mol-blk@0/disk@0:9 [HFS] >> Loading 'System Folder:Mac OS ROM' from 'Mac OS 9' >> Timer calibration fix: 24.90 MHz [32977] >> Starting ELF boot loader >> ============================================================= ----- Original Message ---- From: Nathan Smith <nda...@gm...> To: Bradley Walker <mod...@ya...>; mac...@li... Sent: Wednesday, June 13, 2007 2:50:09 PM Subject: Re: [Mac-on-linux-users] Ubuntu 7.04 & MOL issue On 6/13/07, Bradley Walker <mod...@ya...> wrote: > I'm writing because I've ran into issues with running MOL 0.9.72 on Ubuntu > 7.04. I went through installed a fresh copy of Ubuntu on my dual G4 which > went fine. I installed all the nessecary files such as autoconf, m4, > libncurses, etc. Then I extract the gzip file and do the following steps: > > 1.) ./autogen.sh > 2.) make (including the make menuconfig part) > 3.) make install > 4.) run molvconfig > > Afterwards I immediately go and configure my /etc/mol/molrc.macos config > file to show 256mb of memory and to adjust the disk devices that it can > access. I did have to temporarily disable the included molrc.net file > because I was having tun0 errors, but for now I'm not worrying about that. > Instead when I run 'startmol' and have a Mac OS9 disc in there... the screen > goes to full screen for a brief second but kicks me back out to the terminal > window with an error that no SCSI devices could be found. I watch and the > CDRom is not even accessed during this time. At first I figured it was a > configuration error, so I checked and my molrc.macos file references > > blkdev: /media/cdrom0 -cd > > I tried using paths like /dev/hd(x), /media/cdrom, you name it. Nothing > happened. Does anyone have any ideas??? Could you paste your molrc.macos somewhere so we can take a look at it? Also, I assume you are looking to install OS 9. To boot from cd, you need to pass the --cdboot flag with startmol in order to boot from the install disk. You will want to make sure that you have somewhere to install it (and include a blkdev entry in your molrc.macos). Also, you will want the blkdev entry for the CD-ROM to reflect the actually device reference (/dev/hd?) and not the mount-point. I hope that helps. -- Nathan Smith nda...@gm... Need a vacation? Get great deals to amazing places on Yahoo! Travel. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Mac-on-linux-users mailing list Mac...@li... https://lists.sourceforge.net/lists/listinfo/mac-on-linux-users ____________________________________________________________________________________ Get the Yahoo! toolbar and be alerted to new email wherever you're surfing. http://new.toolbar.yahoo.com/toolbar/features/mail/index.php |