From: James S. <jam...@gm...> - 2011-04-14 02:07:05
|
On 2011-04-13 21:48:25 -0400, Simon Haines <sim...@co...> said: > > > James, > I have also had problems bridging from the in-kernel mceusb driver to > userspace for using lircd to decode signals (I'm using a non-media center > remote with a media center receiver for which there is yet no keymap, so I > need to get lircd to decode it for the time being). It looks like you're > about the same place as I am, with lircd not complaining, but not saying > anything else either. Try pointing mode2 to your /dev/lirc0 and comparing > the pulse/space output with your lircd.conf file to ensure that mceusb is > sending something that looks like it should be decoded properly. > I haven't had time to get lircd under a debugger to take a look yet, but I > will in the next couple of days and let you know if anything turns up. > Simon. I started mode2 and pressed my "stop" button one time. The result of this can be found at [1]. Comparing it with my lircd.conf[2], I don't see anything wrong. But I also don't know how much is being repeated (or not). ~ James [1] -- http://dl.dropbox.com/u/1038672/mceusb/mode2.out [2] -- http://dl.dropbox.com/u/1038672/mceusb/lircd.conf |