From: Greg O. <oli...@gm...> - 2010-01-21 16:00:51
|
On Thu, Jan 21, 2010 at 9:54 AM, Nugent, Lee <Lee...@ku...> wrote: > Greg, > > The output from aptitude show lirc is: > > Package: lirc > State: installed > Automatically installed: no > Version: 0.8.6-0ubuntu2 > Priority: extra > Section: universe/utils > Maintainer: Ubuntu Core Developers <ubu...@li...> > Uncompressed Size: 2,507k > Depends: libasound2 (> 1.0.18), libc6 (>= 2.7), libftdi1 (>= 0.16), > liblircclient0 (>= 0.6.4), libusb-0.1-4 (>= 2:0.1.12), debconf (>= 0.5) > | debconf-2.0, lsb-base, setserial > Recommends: udev > Suggests: lirc-modules-source, lirc-x > Conflicts: makedev (< 2.3.1-88) > Description: infra-red remote control support > LIRC stands for 'Linux Infra-red Remote Control'. > > I will modify the load_modules variable and reboot the box over and over to try and reproduce the freezing. > If you still have an older kernel installed, try booting it as well. If it does not lock up without the modules loaded, then there may be a hardware issue. Can you also boot without the quiet and splash options on your kernel line? -Greg > > > > Thanks, > Lee > > -----Original Message----- > From: Greg Oliver [mailto:oli...@gm...] > Sent: Thursday, January 21, 2010 9:45 AM > To: Nugent, Lee > Cc: lir...@li... > Subject: Re: LIRC hanging on Ubuntu 2.6.31-17 on startup > > On Thu, Jan 21, 2010 at 8:28 AM, Nugent, Lee > <Lee...@ku...> wrote: >> Thanks for the reply. >> >> dmesg --> http://pastebin.com/m2a9fe82b >> >> hardware.conf --> http://pastebin.com/m2645a074 >> >> I am assuming that you are asking for the contents of hardware.conf. Also, will dmesg show us anything since when it freezes I have to forcefully reboot the box? I thought dmesg starts over at each reboot. >> > > Hmmm.. Everything looks good to me. The correct modules are loading. > What is the output from "aptitude show lirc"? > > Do you have "proposed" and "backports" enabled by chance for software > updates.. NM - I see you are running a pae kernel - I guess 32 bit on > a 64 bit host? I am not sure if it is related, but someone was having > a similar problem a couple of days ago. > > I assume the machine boots fine with the remote unplugged? If you > modify your hardware.conf to load_modules=false and reboot does the > problem go away? I know the remote will not work, but just trying to > isolate it.. > > -Greg > >> >> Thanks, >> Lee >> >> -----Original Message----- >> From: Greg Oliver [mailto:oli...@gm...] >> Sent: Wednesday, January 20, 2010 6:49 PM >> To: Nugent, Lee >> Cc: lir...@li... >> Subject: Re: LIRC hanging on Ubuntu 2.6.31-17 on startup >> >> On Wed, Jan 20, 2010 at 3:06 PM, Nugent, Lee >> <Lee...@ku...> wrote: >>> I installed a new minimal installation of Karmic on 2 PC's (for HTPC >>> use) yesterday and apparently there has been an update that is causing >>> LIRC to hang occasionally on startup. Two weeks ago I installed minimal >>> Karmic on two other machines and they don't have this problem. The only >>> difference is the kernel has been updated. Anyway this is where it is >>> hanging (occasionally): >>> >>> *Loading LIRC Modules >>> lirc-0.8.6[774]:lircd(default) ready, using /var/run/lirc/lircd >> >> Do you know which modules it is trying to load.. Post your hardware >> settings and the appropriate dmesg output as well.. >> >> -Greg >> >>> Any suggestions? >>> >>> >>> >>> >>> Thanks, >>> Lee >>> >>> ------------------------------------------------------------------------------ >>> Throughout its 18-year history, RSA Conference consistently attracts the >>> world's best and brightest in the field, creating opportunities for Conference >>> attendees to learn about information security's most important issues through >>> interactions with peers, luminaries and emerging and established companies. >>> http://p.sf.net/sfu/rsaconf-dev2dev >>> >> > |