From: Wayne a. H. <way...@al...> - 2008-12-07 22:12:57
|
> -----Original Message----- > From: Jarod Wilson [mailto:ja...@wi...] > Sent: Sunday, 7 December 2008 10:19 p.m. > To: lir...@li... > Subject: Re: IMON PAD/VFD 15c2:0036 CVS partial operation > > > On Sun, 2008-12-07 at 15:24 +0100, Wayne and Holly wrote: > > I am currently trying to install the subject remote that > came with a > > Thermaltake Mozart HTPC case but after more than a week have yet to > > crack it completely. > > I have been trawling all of the relevant mailing lists and tried > > several > > methods with mixed results. My current situation is as follows: > > > > New build, Kubuntu 8.10 x86 (2.6.27-9-generic). > > usbhid prevented from using the device (i.e. option usbhid > > quirks=0x15c2:0x0035:0x0004). Latest version of lirc from CVS > > installed (taken today). modprobe lirc-imon results in device being > > detected and nodes created (/dev/lirc0, /dev/lirc1, /dev/lcd0, > > /dev/lcd1). chmod all new nodes to allow read and write. > > Can echo to /dev/lcd0 and /dev/lcd1 (both have the same results and > > write > > successfully to the VFD). > > irw, irrecord, and mode2 work for /dev/lirc0, but only for > the number > > keys. > > As soon as I press any other key, nothing is detected by any of the > > applications. To get them working again I either have to disconnect > > then > > reconnect the imon (for irw and irrecord), or point mode2 to another > > node > > (i.e. mode2 -d /dev/lirc1), then back to the proper node (i.e. mode2 > > -d > > /dev/lirc0). > > See step 5 of > http://mythtvblog.blogspot.com/2008/04/getting-imon-0038-lcd-working-with-li rc.html Slightly different device, but same treatment on the lirc side. --jarod YOU BEAUTY!!!! Works like a charm. Strangely 2 buttons required capture using irrecord, and their results were sufficiently different for me to add them as another remote. Probably completely unneccessary but I'm paranoid by now and every single button works as I want. Thanks again Wayne |