Re: Problem with keys repeated

[Dom H <spe...@go...>]

Anyone any idea, I'm a bit stuck without use of my remote! :)


Dom.

On 03/03/07, Dom H <spe...@go...> wrote:
>
> 'sudo evtest /dev/input/irremote' shows the following with a single
> keypress (DOWN);
>
> Original Hauppauge Nova-T remote
>
> Event: time 1172928669.099038, type 1 (Key), code 108 (Down), value 1
> Event: time 1172928669.099045, type 0 (Reset), code 0 (Reset), value 0
> Event: time 1172928669.336429, type 1 (Key), code 108 (Down), value 0
> Event: time 1172928669.336435, type 0 (Reset), code 0 (Reset), value 0
>
>
> Logitech Harmony 525 Remote
>
> Event: time 1172928613.397507, type 1 (Key), code 108 (Down), value 1
> Event: time 1172928613.397515, type 0 (Reset), code 0 (Reset), value 0
> Event: time 1172928613.649279, type 1 (Key), code 108 (Down), value 2
> Event: time 1172928613.649288, type 0 (Reset), code 0 (Reset), value 0
> Event: time 1172928613.685270, type 1 (Key), code 108 (Down), value 2
> Event: time 1172928613.685277, type 0 (Reset), code 0 (Reset), value 0
> Event: time 1172928613.721272, type 1 (Key), code 108 (Down), value 2
> Event: time 1172928613.721279, type 0 (Reset), code 0 (Reset), value 0
> Event: time 1172928613.757279, type 1 (Key), code 108 (Down), value 2
> Event: time 1172928613.757286, type 0 (Reset), code 0 (Reset), value 0
> Event: time 1172928613.763489, type 1 (Key), code 108 (Down), value 0
> Event: time 1172928613.763494, type 0 (Reset), code 0 (Reset), value 0
>
> Any idea how to rectify this?
>
> Many thanks
>
> Dom
>
>
> On 02/03/07, Dom H < spe...@go...> wrote:
> >
> > For some reason lirc seems to be receiving repeated keypresses from my
> > remote.  If I run IRW I get 4-5 repeated keys for each press. Strange thing
> > is, I actually have 2 remotes, one is the original that came with the
> > tv-card (Hauppauge Nova-T pci) which doesn't repeat presses, second is a
> > Logitech Harmony 'multi' remote which does have the problem.
> >
> > My other devices, tv/amp etc, don't act like they're recieving mulitple
> > presses from the Logitech and I can't find any options for the Logitech that
> > could affect this. It worked fine before also.
> >
> > I start lircd with the following;
> >
> > lircd -l --driver=dev/input --device=/dev/input/irremote
> >
> >
> > Any ideas?
> >
> > Dom.
> >
> >
>