From: Jerry Geis <geisj@pa...> - 2007-08-10 11:36:32
Normally I use port 3f8 and irq 4 and everything is good.
However, I have a PC with no serial port. I got a 1 port RS2232 card and
put it in.
It reports as 0xcc00 and irq 18. I changed my config line to:
./configure --without-x --with-syslog --with-driver=serial
--with-major=61 --with-port=0xcc00 --with-irq=18 --with-transmitter
--enable-sandboxed --with-kerneldir=/lib/modules/`uname -r`/build
But it doesnt seem to be working.
My lirc_serial module loads, my driver loads just nothing happening on IR.
This should work right? Did I miss something else? THanks,