From: <sco...@ya...> - 2009-04-16 04:47:26
|
Hi all, Please forgive my newbie-ness, but I've googled my problem a lot and haven't found much. Perhaps because I'm at a bit of loss as to what the heck search for! So here's my issue: I'm using a series 2 tivo remote with lirc for my myth box. I'm using a canned lircd.conf file I found online for this remote, and it works great for the most part, but I'm having a 'stuttering' problem, so to speak. Whenever I press a button, there's a good chance that lirc will interpret the one button press as two button presses. It's as though the tivo remote buttons are bouncing, and for some reason lirc is not reading the consecutive button presses as repeats, but as individual button events. I've tried various values for repeat in my lircrc file, but nothing seems to help. Keep in mind that this behavior is intermittant. Sometimes I press a remote button and only one event gets logged. Other times I press a remote button and multiple repeat button events are logged. Sometimes, however, I press a remote button and multiple individual button events are logged. Here's an example of irw output when I tap on the Select button repeatedly:00000000a10c9847 00 2_SELECT Tivo_S2 00000000a10c9847 01 2_SELECT Tivo_S2 00000000a10c9847 00 2_SELECT Tivo_S2 00000000a10c9847 01 2_SELECT Tivo_S2 00000000a10c9847 00 2_SELECT Tivo_S2 00000000a10c9847 00 2_SELECT Tivo_S2 00000000a10c9847 01 2_SELECT Tivo_S2 The end result is that mythtv sometiems thinks I hit a button twice, and does very annoying things like start a recording I didn't intend to watch, navigate to a menu I didn't want, etc. I've tried recording my own lircd.conf file using irrecord, but don't see a difference. Any idea what I can do to fix this? Fantasitic work on LIRC BTW. Thanks much, --scott Here's an excerpt from my lircd.conf file: begin remote name Tivo_S2 bits 32 flags SPACE_ENC|CONST_LENGTH eps 20 aeps 200 header 9000 4500 one 562 1687 zero 562 562 ptrail 562 repeat 9000 2250 gap 108000 min_repeat 9 toggle_bit 0 frequency 10000 begin codes TIVO 0x00000000A10CE00F TV_POWER 0x00000000A10C0807 ... |
From: <al...@xm...> - 2009-04-16 21:00:24
|
I occasionally have the same sort of issue, but not with lirc - with my series2 tivo. Have you tried installing fresh batteries? Quoting sco...@ya...: > Hi all, > Please forgive my newbie-ness, but I've googled my problem a lot and > haven't found much. Perhaps because I'm at a bit of loss as to what > the heck search for! So here's my issue: > I'm using a series 2 tivo remote with lirc for my myth box. I'm > using a canned lircd.conf file I found online for this remote, and > it works great for the most part, but I'm having a 'stuttering' > problem, so to speak. Whenever I press a button, there's a good > chance that lirc will interpret the one button press as two button > presses. It's as though the tivo remote buttons are bouncing, and > for some reason lirc is not reading the consecutive button presses > as repeats, but as individual button events. > > I've tried various values for repeat in my lircrc file, but nothing > seems to help. Keep in mind that this behavior is intermittant. > Sometimes I press a remote button and only one event gets logged. > Other times I press a remote button and multiple repeat button > events are logged. Sometimes, however, I press a remote button and > multiple individual button events are logged. > > Here's an example of irw output when I tap on the Select button > repeatedly:00000000a10c9847 00 2_SELECT Tivo_S2 > 00000000a10c9847 01 2_SELECT Tivo_S2 > 00000000a10c9847 00 2_SELECT Tivo_S2 > 00000000a10c9847 01 2_SELECT Tivo_S2 > 00000000a10c9847 00 2_SELECT Tivo_S2 > 00000000a10c9847 00 2_SELECT Tivo_S2 > 00000000a10c9847 01 2_SELECT Tivo_S2 > > The end result is that mythtv sometiems thinks I hit a button twice, > and does very annoying things like start a recording I didn't > intend to watch, navigate to a menu I didn't want, etc. > > I've tried recording my own lircd.conf file using irrecord, but > don't see a difference. Any idea what I can do to fix this? > Fantasitic work on LIRC BTW. Thanks much, > --scott > > > Here's an excerpt from my lircd.conf file: > begin remote > > name Tivo_S2 > bits 32 > flags SPACE_ENC|CONST_LENGTH > eps 20 > aeps 200 > > header 9000 4500 > one 562 1687 > zero 562 562 > ptrail 562 > repeat 9000 2250 > gap 108000 > min_repeat 9 > toggle_bit 0 > > frequency 10000 > > begin codes > TIVO 0x00000000A10CE00F > TV_POWER 0x00000000A10C0807 > ... |