From: Aaron W. <li...@wh...> - 2008-08-30 00:24:57
|
Hello all, Sorry to annoy with a support question, but LIRC does not seem to generate input events If posted the bug here: https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/262851 Binary package hint: lirc Using Mythbuntu 8.04, fully updated. I have a bttv Winfast TV 2000XP (card 34) that is working fine for all TV capture. The ir receiver does not seem to be generating input events. If I run: ~# lircd -n -d /dev/input/event6 -H devinput lircd-0.8.3pre1[6477]: lircd(userspace) ready No further events are received as I push buttons on the remote. The remote worked fine in Windows XP with the enclosed drivers. The input device seems to have registered correctly. ~# cat /proc/bus/input/devices I: Bus=0001 Vendor=107d Product=6606 Version=0001 N: Name="bttv IR (card=34)" P: Phys=pci-0000:02:0a.0/ir0 S: Sysfs=/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/input/input6 U: Uniq= H: Handlers=kbd event6 B: EV=100003 B: KEY=10afc336 2150a48 0 0 0 404 80010000 190 4801 1e0000 4400 100000 10000ffc ~# lspci | grep Brooktree 02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) If I can be of any further help - any advice would be appreciated. We've RTFM and Google was not My Friend. I have just signed up to the mailing list, so I should get replies. Thanks in advance for any help. Regards, Aaron -- FSF Associate Member: 5632 http://www.fsf.org |
From: Aaron W. <li...@wh...> - 2008-09-03 07:44:17
|
Hello all, Sorry to annoy with a support question, but LIRC does not seem to generate input events If posted the bug here: https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/262851 Binary package hint: lirc Using Mythbuntu 8.04, fully updated. I have a bttv Winfast TV 2000XP (card 34) that is working fine for all TV capture. The ir receiver does not seem to be generating input events. If I run: ~# lircd -n -d /dev/input/event6 -H devinput lircd-0.8.3pre1[6477]: lircd(userspace) ready No further events are received as I push buttons on the remote. The remote worked fine in Windows XP with the enclosed drivers. The input device seems to have registered correctly. ~# cat /proc/bus/input/devices I: Bus=0001 Vendor=107d Product=6606 Version=0001 N: Name="bttv IR (card=34)" P: Phys=pci-0000:02:0a.0/ir0 S: Sysfs=/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/input/input6 U: Uniq= H: Handlers=kbd event6 B: EV=100003 B: KEY=10afc336 2150a48 0 0 0 404 80010000 190 4801 1e0000 4400 100000 10000ffc ~# lspci | grep Brooktree 02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) If I can be of any further help - any advice would be appreciated. We've RTFM and Google was not My Friend. I have just signed up to the mailing list, so I should get replies. Thanks in advance for any help. Regards, Aaron -- FSF Associate Member: 5632 http://www.fsf.org |
From: <li...@ba...> - 2008-09-03 18:11:18
|
Hi! Aaron Whitehouse "li...@wh..." wrote: > The ir receiver does not seem to be generating input events. If I run: > ~# lircd -n -d /dev/input/event6 -H devinput Do you get any output from /dev/input/event6 at all? If not, then the problem is not in LIRC, but the kernel driver which is part of the Linux kernel. Have you made sure that you are using the correct config file? Christoph |
From: Aaron W. <li...@wh...> - 2008-09-06 03:32:22
|
Thanks a lot for your reply, Chris, 2008/9/4 Christoph Bartelmus <li...@ba...>: > Do you get any output from /dev/input/event6 at all? > If not, then the problem is not in LIRC, but the kernel driver which is > part of the Linux kernel. No, we tested that and there was no output. > Have you made sure that you are using the correct config file? I thought that, given there were no events coming through, the config file wouldn't matter - is that the case? I selected my remote in the Mythbuntu Control Centre GUI, but I'm pretty new to all of this... Thanks again - any help with figuring out where my bug is would be appreciated! Regards, Aaron -- FSF Associate Member: 5632 http://www.fsf.org |