I hope to get some help form here, as i have no clue anymore what to do to get my remote to work. Neither i find anything in the internet which matches to my prob. I installed already a few remotes, but those always used "normal" drivers and devices.
The remote i struggle with is recognized as a hid device, and its adressable via 2 files, /dev/input/event2 and /dev/input/event3. If i add the correct driver LIRCD_DRIVER="devinput" and one of the devices LIRCD_DEVICE="/dev/input/event2" into the config file of lirc, i can use a few buttons on my remote control. Now, if i add the other device, then i can use the other buttons. But never i can use all buttons. I have read a lot in the past days about using multiple devices for lirc, espacially at http://www.lirc.org/html/configure.html.
There is one part at this website i really dont understand:
> lircd --driver=default --device=/dev/lirc1 --output=/dev/lircd1 \
> lircd --driver=default --device=/dev/lirc --output=/dev/lircd \
Where do i have to put this ? If i put those lines with correct devices into a script and start lirc like this, there is a bit of success. Irw works (if there is a lircd.conf file) but irxevent and/or irexec doesnt work, saying it could not connect to socket and connection refused. Then, if i start lirc with the lirc config file, irxevent and irexec works, but not with all keys.
There must be a way to put those lines above into the config file, but how and where exactly ? I dont find anything in the documentation or the manual where to edit the lirc config file and to include the lines above. Can you please help me ?
Im using opensuse 11.1 and lirc 0.8.4
Neu bei WEB.DE: Kostenlose maxdome Movie-FLAT!