Here is lirc config for SB1095 Soundblaster X-Fi USB Receiver with RM-820 remote

It works for me on lirc 0.9.0 with the following parameters: --device=hw:Pro --driver=alsa_usb

Device description can be found here - http://en.store.creative.com/sound-blaster/sound-blaster-x-fi-surround-5-1-pro/1-20055.aspx

--------------

#
# brand: Creative
# model no. of remote control: RM-820
# devices being controlled by this remote: SB1095 Soundblaster X-Fi USB Receiver
#

begin remote

  name  Creative_RM-820
  bits           8

      begin codes
     
    'POWER'               0x29                # Power
    'MENU'                0x1B                # Menu
    'KNOB_MUTE'           0x0D                # Knob Mute
    'KNOB_VOLUMEUP'       0x10                # Knob Vol_Up
    'KNOB_VOLUMEDOWN'     0x0F                # Knob Vol_Down
    'MUTE'                0x2A                # Mute
    'VOLUMEUP'            0x2B                # Vol_Up
    'VOLUMEDOWN'          0x2C                # Vol_Down
    'UP'                  0x31                # Up
    'LEFT'                0x27                # Left
    'RIGHT'               0x28                # Right
    'REW'                 0x35                # Rew
    'OK'                  0x30                # Ok
    'FWD'                 0x36                # Fwd
    'DOWN'                0x32                # Down
    'REPEAT'              0x3C                # Repeat
    'SHUFFLE'             0x3B                # Shuffle
    'RETURN'              0x1A                # Return
    'PLAY'                0x2F                # Play

      end codes

end remote