--- a/ChangeLog
+++ b/ChangeLog
@@ -1,1216 +0,0 @@
-2000-10-23  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* acinclude.m4:
-	configure script broke with 2.2.18pre* kernels because it failed to recognise the correct CC value,
-	it should work again, but it's still a hack
-
-2000-10-22  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/configure.html, doc/html-source/install.html, drivers/lirc_serial/lirc_serial.c, drivers/lirc_sir/lirc_sir.c:
-	documentation updated
-
-2000-10-10  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/irrecord.c, drivers/lirc_i2c/lirc_i2c.c, configure.in:
-	enable devfs only for lirc_dev
-
-2000-10-08  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* contrib/lirc.suse6.2, contrib/lircd.suse6: renamed file
-
-2000-10-07  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_i2c/lirc_i2c.c: uploaded Gerd's patch,
-	Hauppauge support should work again
-
-2000-10-02  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/serial.c: removed too much
-
-2000-10-01  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* setup.sh, tools/irxevent.c: small fix and enhancement,
-	thanks to Tom Hudec <Tom.Hudec@seznam.cz> for the patch
-
-2000-09-30  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* NEWS, README, configure.in, doc/html-source/doc.html, doc/html-source/install.html, drivers/Makefile.am, drivers/lirc_dev/lirc_dev.c, drivers/lirc_haup/.cvsignore, drivers/lirc_haup/Makefile.am, drivers/lirc_haup/lirc_haup.c, drivers/lirc_i2c/.cvsignore, drivers/lirc_i2c/Makefile.am, drivers/lirc_i2c/lirc_i2c.c, remotes/pixelview/lircd.conf.playtv_bt878, setup.sh:
-	started adding support for Pixelview PlayTV (bt878) card,
-	not working yet
-
-	* daemons/serial.c, tools/lirc_client.c: small fixes
-
-2000-09-27  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* configure.in, drivers/lirc_gpio/lirc_gpio_p.c, setup.sh:
-	added support for PixelView PlayTV PAK TV card
-
-	* TODO, acconfig.h: temporary devfs work-around
-
-	* TODO, daemons/irrecord.c: reducing misunderstandings
-
-	* drivers/lirc_dev/lirc_dev.c:
-	devfs support officially will come with 2.4.x AFAIK
-
-2000-09-26  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* setup.sh: substituted which with type
-
-2000-09-21  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_haup/lirc_haup.c, drivers/lirc_gpio/lirc_gpio_p.c:
-	lirc_haup needs bttv module
-
-2000-09-19  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* tools/lirc_client.c: bugfix and additional consistency tests
-
-	* contrib/lircs: added LIRC starter stript,
-	thanks to Michael Kammerer for this contribution
-
-2000-09-18  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* tools/xmode2.c: added alternative display mode for xmode2,
-	thanks to Peter T. Whiting for the patch
-
-	* NEWS, configure.in, drivers/lirc_gpio/lirc_gpio_p.c, remotes/chronos/lircd.conf.chronos, setup.sh, ANNOUNCE:
-	 added support for Chronos Video Shuttle II TV card,
-	thanks to Tonu Raitviir <jussuf@BumpClub.ee> for patches
-
-2000-09-17  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/foot.html, drivers/lirc_gpio/lirc_gpio_p.c, NEWS:
-	fixed typo
-
-2000-09-07  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_dev/lirc_dev.c, drivers/lirc_gpio/lirc_gpio_p.c, setup.sh:
-	added support for Phoebe Tv Master
-
-2000-09-03  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/hw_default.c, daemons/irrecord.c, daemons/receive.c, daemons/receive.h, daemons/transmit.c, daemons/transmit.h:
-	recognition of toggle bit should work again,
-	implemented recognition of min_repeat
-
-2000-08-28  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/lirc_gpio_p.c: mapping should be correct now
-
-2000-08-26  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/lirc_gpio_p.c: moved some bits around
-
-	* ANNOUNCE, NEWS, drivers/lirc_serial/lirc_serial.c, setup.sh:
-	ok, IRdeo support should *work* now,
-	transmitting is also implemented
-
-2000-08-25  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/hw_caraca.c, daemons/hw_caraca.h, remotes/caraca/lircd.conf.caraca, remotes/caraca/lircrc.caraca:
-	added caraca files...
-
-2000-08-23  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* NEWS, acconfig.h, configure.in, drivers/lirc_serial/lirc_serial.c, setup.sh:
-	Added support for IRdeo.
-	Currently only receiving works. Many thanks to Hans-Hermann Redenius for contributing a device.
-
-	* daemons/Makefile.am, NEWS, acconfig.h, configure.in, setup.sh:
-	Konrad Riedel has added support for CARACA (caraca.sourceforge.net)
-
-2000-08-17  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/lircd.c: bugfix: don't close device during repeating
-
-2000-08-12  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/install.html, drivers/lirc_serial/lirc_serial.c:
-	doc updates
-
-2000-08-05  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* setup.sh: added bttv card ids
-
-2000-07-29  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/lirc_gpio_p.c: this mask seems to be correct
-
-2000-07-28  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/install.html: explained bttv autodetection
-
-	* AUTHORS, doc/html-source/technical.html, drivers/lirc_dev/lirc_dev.c, drivers/lirc_dev/lirc_dev.h, drivers/lirc_gpio/lirc_gpio_i.c, drivers/lirc_gpio/lirc_gpio_p.c, remotes/pixelview/lircd.conf.playtv_pro, remotes/pixelview/lircrc.playtv_pro:
-	code clean-up (Artur)
-
-2000-07-27  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/lirc_gpio_p.c, remotes/cph03x/lircd.conf.cph03x, setup.sh:
-	some TV card changes
-
-2000-07-26  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* ChangeLog, NEWS, TODO, configure.in, daemons/ir_remote.h, daemons/lircd.c, daemons/lircd.h, doc/html-source/technical.html, drivers/lirc_dev/lirc_dev.c:
-	implemented min_repeat (one TODO item less)
-
-2000-07-23  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_dev/lirc_dev.c: fix for 2.4.0-test4
-
-	* configure.in: fixed typo in configure script
-
-2000-07-21  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/Makefile.am, drivers/lirc_gpio/lirc_gpio_p.c, ANNOUNCE, NEWS, configure.in, daemons/.cvsignore, doc/html-source/foot.html, doc/html-source/install.html:
-	releasing lirc-0.6.1
-
-2000-07-19  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* remotes/avermedia/lircd.conf.avermedia, remotes/avermedia/lircd.conf.avermedia98, remotes/avermedia/lircmd.conf.avermedia, remotes/avermedia/lircmd.conf.avermedia98, setup.sh, configure.in:
-	added config files for old AVerMedia cards
-
-2000-07-13  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* ANNOUNCE, ChangeLog, daemons/Makefile.am, daemons/config_file.c, daemons/dump_config.c, daemons/hw_default.c, daemons/ir_remote.h, daemons/slinke.c, daemons/slinke.h:
-	added a tool to convert Slink-e device files to LIRC config files
-
-	* configure.in, drivers/lirc_gpio/lirc_gpio_p.c, setup.sh:
-	added CPH6xx support (untested)
-
-2000-07-08  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* NEWS, configure.in, daemons/Makefile.am, daemons/hw_pinsys.c, daemons/hw_pinsys.h, daemons/hw_pixelview.c, remotes/pinnacle_systems/lircd.conf.pctv, setup.sh:
-	added support for PCTV receiver,
-	many thanks to Bart Alewijnse for contributing the driver
-
-	* NEWS, acconfig.h, configure.in, daemons/config_file.c, daemons/hw_default.c, daemons/hw_irman.c, daemons/hw_logitech.c, daemons/hw_pixelview.c, daemons/hw_slinke.c, daemons/ir_remote.c, daemons/irrecord.c, daemons/lircd.c, daemons/lircd.h, daemons/lircmd.c, daemons/receive.c, daemons/serial.c, daemons/transmit.c, doc/html-source/programs.html, setup.sh:
-	lircd now can be configured to use syslogd for log output,
-	thanks to Rainer Clasen for the suggestion
-
-	* NEWS, doc/html-source/programs.html, tools/Makefile.am, tools/irexec.c:
-	added --daemon option to irexec (suggestion by Eric Crahen)
-
-2000-07-06  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* NEWS, daemons/config_file.c, daemons/dump_config.c, daemons/ir_remote.c, daemons/ir_remote.h, daemons/irrecord.c, daemons/lircd.c, daemons/receive.c, daemons/transmit.c:
-	added RC-MM support
-
-2000-07-05  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* AUTHORS, NEWS, daemons/config_file.h, daemons/dump_config.c, daemons/hw_default.c, daemons/ir_remote.h, daemons/irrecord.c, daemons/receive.c, daemons/receive.h, daemons/transmit.c, daemons/transmit.h, setup.sh:
-	added RC-6 support
-
-	* daemons/hw_slinke.c: made memory allocations safer,
-	freeing allocations
-
-2000-07-02  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* AUTHORS, configure.in, daemons/Makefile.am, daemons/hw_slinke.c, daemons/hw_slinke.h, setup.sh:
-	added support for Slink-e from Nirvis Systems,
-	code provided by Max Spring
-
-	* daemons/hw_logitech.c, daemons/hw_pixelview.c:
-	added O_NONBLOCK,O_NOCTTY flags to open()
-
-	* drivers/lirc_serial/lirc_serial.c, drivers/lirc_sir/lirc_sir.c:
-	nobody reads documentations...
-
-2000-06-24  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/receive.c: fix for unusual header
-
-2000-06-22  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* configure.in, drivers/lirc_gpio/lirc_gpio_p.c, setup.sh:
-	support for CPH03x TV cards (untested)
-
-	* doc/html-source/install.html, setup.sh: UIR=Irman
-
-2000-06-18  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_dev/lirc_dev.c, drivers/lirc_fly98/lirc_fly98.c, drivers/lirc_parallel/lirc_parallel.c, drivers/lirc_serial/lirc_serial.c, drivers/lirc_sir/lirc_sir.c:
-	fixes for latest kernel,
-	thanks to wollny for the patch
-
-2000-06-12  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* configure.in, daemons/Makefile.am, daemons/hw_default.c, daemons/hw_default.h, daemons/receive.c, daemons/receive.h, daemons/serial.c, daemons/serial.h, daemons/transmit.c, daemons/transmit.h:
-	internal change of code structure
-
-2000-06-11  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/lirc_gpio_p.c, remotes/avermedia/lircd.conf.avermedia:
-	AVerMedia config updates
-
-2000-06-02  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/lirc_gpio_p.c, remotes/avermedia/lircd.conf.avermedia:
-	now should work with TVCapture98 cards
-
-	* drivers/lirc_dev/lirc_dev.c, drivers/lirc_parallel/lirc_parallel.c:
-	some SMP fixes (thanks to Gert)
-
-2000-05-27  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* setup.sh: chaged default for SOFT_CARRIER to enabled
-
-2000-05-22  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/lirc_gpio_p.c:
-	finally we get it right, TVPhone98 works
-
-2000-05-21  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/lirc_gpio_p.c:
-	you were right Artur, it could not be correct... :)
-
-2000-05-15  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/ChangeLog:
-	This is still version 0.1 of the software. A new patches has been added
-	to the archive: for kernel 2.2.14 and 2.2.15.
-
-	* drivers/lirc_fly98/README: 2.2.15 kernel patch added.
-
-	* drivers/lirc_fly98/patches/lirc_fly98-kernel-2.2.15.diff:
-	Patch for 2.2.15 kernel bttv driver added.
-
-2000-05-15  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/install.html: lirc_gpio_p doc updates
-
-2000-05-14  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/help.html: new mailing list
-
-2000-05-11  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* acconfig.h, daemons/lircd.c:
-	lircd now creates pid lockfile in /var/run
-
-2000-05-10  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/lirc_gpio_p.c: code clean-ups (Artur)
-
-2000-05-09  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_aver/.cvsignore, drivers/lirc_aver/Makefile.am, drivers/lirc_aver/lirc_aver.c, drivers/lirc_aver/patches/lirc_aver-bttv-0.6.4.diff, drivers/lirc_aver/patches/lirc_aver-kernel-2.2.10.diff, drivers/lirc_aver/patches/lirc_aver-kernel-2.2.12.diff, drivers/lirc_pixview/.cvsignore, drivers/lirc_pixview/Makefile.am, drivers/lirc_pixview/lirc_pixview.c:
-	removed obsoleted drivers
-
-2000-05-06  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* configure.in, daemons/hw_default.c, daemons/hw_default.h, drivers/lirc_gpio/lirc_gpio_p.c, remotes/avermedia/lircd.conf.avermedia, remotes/avermedia/lircmd.conf.avermedia:
-	changes to make AverMedia TVCapture98 work with the correct config file
-
-2000-05-05  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/install.html, doc/html-source/technical.html, drivers/lirc_gpio/lirc_gpio_p.c:
-	changed algorithm of get_key() to allow AVerMedia support
-
-	* drivers/lirc_dev/lirc_dev.c:
-	changed order of devfs registration (Artur)
-
-2000-05-05  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/ChangeLog:
-	Documentation corrected. Patch for kernel 2.2.14 added.
-
-	* drivers/lirc_fly98/README, drivers/lirc_fly98/patches/lirc_fly98-kernel-2.2.14.diff:
-	Documentation corrected. Added patch for 2.2.14 kernel.
-
-	* drivers/lirc_fly98/README: Instructions updated and corrected.
-
-2000-05-04  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_dev/lirc_dev.c: added include for smp_lock.h
-
-2000-05-03  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/lircd.c, daemons/lircd.h, daemons/lircmd.c, doc/html-source/programs.html:
-	added --permission option,
-	lircd creates /dev/lircd if it does not exist
-
-	* daemons/ir_remote.c, daemons/lircd.c, daemons/lircmd.c, doc/html-source/programs.html:
-	added --nodaemon option
-
-	* configure.in: removed superfluous =
-
-2000-04-29  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* acconfig.h, acinclude.m4, configure.in, drivers/lirc_dev/lirc_dev.c:
-	added devfs support to lirc_dev,
-	thanks to Gerd Knorr for patches
-
-	* drivers/lirc_haup/lirc_haup.c: fixed handling of minor-numbers
-
-	* doc/html-source/install.html:
-	too many people are still trying to run mode2
-
-	* daemons/irrecord.c: added some maintainer-only functions
-
-2000-04-24  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* NEWS, daemons/config_file.c, daemons/config_file.h, daemons/dump_config.c, daemons/hw_default.c, daemons/ir_remote.h, drivers/lirc.h, drivers/lirc_serial/lirc_serial.c:
-	added duty_cycle option to lircd.conf
-
-	* setup.sh: sorry guys, setup.sh was broken
-
-2000-04-19  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/irrecord.c: making things idiot proof, my fault ;-)
-
-2000-04-18  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* acconfig.h, configure.in, drivers/lirc_haup/Makefile.am, drivers/lirc_haup/lirc_haup.c, drivers/lirc_haup/lirc_haup.h, drivers/lirc_haup/lirc_haup_new.c, drivers/lirc_haup/lirc_haup_new.h, drivers/lirc_haup/patches/lirc_haup-linux-2.2.12.diff, setup.sh:
-	removed old (buggy) Hauppauge driver
-
-	* NEWS, daemons/hw_default.c, daemons/irrecord.c, daemons/lircd.c:
-	hardware is only initialized if clients have connected to lircd
-
-	* doc/html-source/programs.html:
-	added pointer to remote control section
-
-2000-04-17  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* TODO, daemons/irrecord.c: is this clear enough ?
-
-	* daemons/lircd.c: SIGHUP does again what it should
-
-2000-04-15  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* TODO, daemons/lircd.c, daemons/lircd.h, daemons/lircmd.c:
-	implemented proper signal handlers
-
-2000-04-13  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* remotes/pixelview/lircmd.conf.playtv_pro, configure.in:
-	added lircmd config file for PixelView PlayTV pro cards
-
-2000-04-11  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* TODO, configure.in, daemons/Makefile.am: daemon(), where are you?
-
-	* drivers/lirc_haup/lirc_haup_new.c: changed default minor number
-
-	* doc/html-source/doc.html, doc/html-source/technical.html:
-	added short info about lirc_dev purpose and usage
-
-	* doc/html-source/install.html:
-	added short info about lirc_gpio_i and lirc_gpio_p with parameter descriptions
-
-	* drivers/lirc_dev/lirc_dev.c:
-	fixed compatibility bug with DECLARE_WAITQUEUE definition (required for 2.3.x kernels)
-
-2000-04-06  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_gpio/Makefile.am:
-	now automake uses top_module variable to find which module is valid
-
-	* drivers/lirc_gpio/lirc_gpio_i.c, drivers/lirc_gpio/lirc_gpio_p.c:
-	minor parameter can be now negative and it has -1 as default value
-
-	* drivers/lirc_dev/Makefile.am:
-	added EXPORT_SYMTAB symbol definition to compiler flags
-
-	* drivers/lirc_dev/lirc_dev.c:
-	fixed logical bug in lirc_read function, fixed bug in interpretation of minor device number in lirc_register_plugin
-
-	* configure.in:
-	added a top_module variable which is used in lirc_gpio directory for decision which module (lirc_gpio_p or lirc_gpio_i) to use
-
-2000-04-02  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_serial/lirc_serial.c: fixes for 2.3.x
-
-	* remotes/pixelview/lircd.conf.playtv_pro, remotes/pixelview/lircrc.playtv_pro:
-	config files for PixelView PlayTV pro card
-
-	* doc/html-source/install.html, drivers/Makefile.am, drivers/lirc_dev/.cvsignore, drivers/lirc_dev/Makefile.am, drivers/lirc_dev/lirc_dev.c, drivers/lirc_dev/lirc_dev.h, drivers/lirc_gpio/.cvsignore, drivers/lirc_gpio/Makefile.am, drivers/lirc_gpio/lirc_gpio_i.c, drivers/lirc_gpio/lirc_gpio_p.c, drivers/lirc_haup/lirc_haup.c, drivers/lirc_haup/lirc_haup.h, drivers/lirc_haup/lirc_haup_new.c, drivers/lirc_haup/lirc_haup_new.h, Makefile.am, NEWS, configure.in, setup.sh:
-	added hardware abstraction layer for TV cards(Artur Lipowski <lipowski@comarch.pl>)
-
-	* doc/html-source/configure.html: forgot to mention TOGGLE_ACTIVATE
-
-	* daemons/lircmd.c: fixed leave semantics
-
-	* ANNOUNCE: noticed error 1 min after release...
-
-	* ANNOUNCE, NEWS, doc/html-source/foot.html, doc/html-source/head1.html, doc/html-source/head2.html, doc/html-source/help.html:
-	releasing lirc-0.6.0
-
-2000-04-01  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* setup.sh: last pre release
-
-2000-03-30  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* Makefile.am, TODO, configure.in, setup.sh:
-	probably broke configuration <g>
-
-2000-03-27  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/Makefile.am, doc/html-source/doc.html, doc/html-source/foot.html, doc/html-source/programs.html, doc/irxevent.keys:
-	done
-
-2000-03-25  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* ChangeLog: oops, don't need any ChangeLog in CVS
-
-	* tools/xmode2.c, ChangeLog, doc/html-source/programs.html, tools/lirc_client.c, tools/smode2.c:
-	95% done
-
-	* doc/html-source/configure.html, doc/html-source/install.html:
-	ispell is your friend
-
-	* drivers/lirc_serial/lirc_serial.c:
-	sense variable could tilt in undesired situations
-
-	* tools/irpty.c:
-	found some bugs while trying to understand what this program does
-
-2000-03-24  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/install.html, doc/html-source/programs.html, doc/html-source/technical.html:
-	final spurt
-
-	* doc/html-source/install.html: compile kernel serial support as module
-
-2000-03-23  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* NEWS, TODO, drivers/lirc_serial/lirc_serial.c:
-	SMP support, fixed many minor implementation drawbacks
-
-	* drivers/lirc_parallel/lirc_parallel.c: fixed minor flaw
-
-2000-03-21  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* TODO, daemons/lircd.c, daemons/lircmd.c:
-	finally fixed daemonize code (I hope)
-
-2000-03-18  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* setup.sh: made clear serial port requirements
-
-2000-03-16  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/hw_default.c, doc/html-source/install.html, tools/xmode2.c:
-	some small fixes
-
-2000-03-14  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/help.html, doc/html-source/install.html, doc/html-source/configure.html, doc/html-source/doc.html, doc/html-source/foot.html:
-	only section 3 missing
-
-2000-03-12  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* configure.in: better use some default values than :
-
-2000-03-10  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/Makefile.am: removed Hauppauge driver too early
-
-2000-03-09  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_sir/.cvsignore: fixed file name
-
-	* ANNOUNCE, configure.in, drivers/Makefile.am:
-	started removing unmaintained drivers
-
-	* doc/html-source/configure.html, doc/html-source/doc.html, doc/html-source/install.html, doc/html-source/technical.html:
-	doc 75% ready
-
-2000-03-07  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/doc.html, doc/html-source/install.html, doc/html-source/configure.html:
-	documentation starts becoming useful
-
-2000-03-03  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* AUTHORS, NEWS, TODO, configure.in, drivers/Makefile.am, drivers/lirc_sir/.cvsignore, drivers/lirc_sir/Makefile.am, drivers/lirc_sir/lirc_sir.c, setup.sh:
-	added SIR IrDA driver from Milan Pikula
-
-2000-03-02  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* tools/lirc_client.c:
-	fixed some more init problems (again thanks to Crispin Flowerday)
-
-2000-02-19  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* tools/lirc_client.c:
-	fixed reinit problem (thanks to Crispin Flowerday for the hint)
-
-2000-02-12  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/lircmd.c: release buttons when deactivated
-
-	* acconfig.h, configure.in, drivers/lirc_haup/Makefile.am, drivers/lirc_haup/lirc_haup.c, drivers/lirc_haup/lirc_haup_new.c, drivers/lirc_haup/lirc_haup_new.h, setup.sh:
-	added Hauppauge driver that uses new I2C layer,
-	thanks to Tom Lees for the port to the new layer
-
-2000-02-07  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* remotes/pixelview/lircd.conf.remotemaster, remotes/pixelview/lircmd.conf.remotemaster:
-	added config file for lircmd
-
-2000-02-05  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_fly98/lirc_fly98.c, drivers/lirc_haup/lirc_haup.c, drivers/lirc_parallel/lirc_parallel.c, drivers/lirc_serial/lirc_serial.c:
-	corrected EINTR semantics
-
-	* daemons/hw_pixelview.c, remotes/pixelview/lircd.conf.remotemaster:
-	PixelView RemoteMaster 2000 should work now
-
-2000-02-02  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/technical.html, tools/irexec.c, tools/irpty.c, tools/irxevent.c, tools/lirc_client.c, tools/lirc_client.h:
-	cleaned up library interface
-
-	* daemons/irrecord.c: added help string
-
-	* acconfig.h: fixed --disable-long-codes
-
-2000-01-24  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_haup/lirc_haup.c, drivers/lirc_haup/lirc_haup.h:
-	bug hunting
-
-	* daemons/irrecord.c: minor fixes
-
-	* remotes/README: pointer to remotes
-
-2000-01-23  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/lircd.c: minor protocol bug fixed
-
-2000-01-20  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* Makefile.am: remove CVS traces from distribution
-
-2000-01-18  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_fly98/Makefile.am: correctec typo
-
-	* configure.in, remotes/logitech/lircd.conf.logitech, remotes/logitech/lircmd.conf.logitech:
-	added config files for Logitech receiver
-
-1999-12-29  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/kbttv2210-gpiomon.diff, drivers/lirc_fly98/kbttv2211-gpiomon.diff, drivers/lirc_fly98/patches/lirc_fly98-bttv-0.6.3.diff, drivers/lirc_fly98/patches/lirc_fly98-kernel-2.2.10.diff, drivers/lirc_fly98/patches/lirc_fly98-kernel-2.2.11.diff, drivers/lirc_fly98/bttv063-gpiomon.diff:
-	Diff files moved to the patches directory and commited to cvs.
-
-	* drivers/lirc_fly98/Makefile.am, drivers/lirc_fly98/README:
-	Patches renamed and moved to patches subdirectory.
-	Makefile.am modified to include distribution of patches.
-
-1999-12-12  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/help.html, doc/html-source/technical.html:
-	some more docs
-
-1999-11-22  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/doc.html, doc/html-source/help.html, doc/html-source/technical.html:
-	some more docs
-
-	* drivers/lirc_haup/lirc_haup.c:
-	uploaded patch from Mike <rickettm@ox.compsoc.net> for 2.3.x kernels
-
-	* drivers/lirc_serial/lirc_serial.c:
-	removed autodetection failure warning
-
-1999-11-07  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/lircd.c, daemons/lircmd.c:
-	glibc-2.1 seems to choke on fclose(stdin), hmm...
-
-	* doc/html-source/doc.html, doc/html-source/foot.html, doc/html-source/help.html, doc/html-source/technical.html:
-	updated docs
-
-1999-10-27  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* configure.in: fixed check for libirman
-
-1999-10-20  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_aver/Makefile.am: corrected EXTRA_DIST line
-
-1999-10-19  denis  <denis@ww-gk3>
-
-	* drivers/lirc_aver/Makefile.am, drivers/lirc_aver/lirc-aver-2.2.10.patch.gz, drivers/lirc_aver/patches/lirc_aver-bttv-0.6.4.diff, drivers/lirc_aver/patches/lirc_aver-kernel-2.2.10.diff, drivers/lirc_aver/patches/lirc_aver-kernel-2.2.12.diff:
-	Added patches with lirc stuff for kernel-2.2.10/2.2.12 and bttv-0.6.4
-
-1999-10-18  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/.cvsignore: added .libs
-
-	* contrib/lircd.suse6: init script for S.u.S.E. 6.2
-
-	* daemons/ir_remote.h, daemons/irrecord.c, ChangeLog, daemons/hw_default.c:
-	NO_HEAD_REP now works
-	many thanks to Ti Leggett for his help
-
-	* tools/mode2.c, tools/smode2.c, tools/xmode2.c:
-	more understandable error message
-
-1999-10-14  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/doc.html, doc/html-source/help.html: doc updates
-
-	* daemons/irrecord.c: fixed problem with seldom protocol (untested)
-
-1999-10-09  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* .cvsignore, daemons/.cvsignore, doc/.cvsignore, tools/.cvsignore:
-	updated some .cvsignore files
-
-	* drivers/lirc_haup/lirc_haup.c: don't try to compile with old kernels
-
-1999-10-08  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/Makefile.am: create /usr/local/etc/ if not present
-
-1999-10-03  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_haup/Makefile.am, drivers/lirc_haup/patches/lirc_haup-linux-2.2.12.diff:
-	added kernel patch for Hauppauge driver
-
-1999-09-28  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_haup/lirc_haup.c, drivers/lirc_haup/lirc_haup.h, lirc-bttv-2.2.7.patch.gz:
-	removed old patch
-	fixed poll semantics
-
-1999-09-26  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_haup/lirc_haup.c: some locking fixes
-	patch for 2.3.x provided by Mike Ricketts
-
-1999-09-25  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* tools/smode2.c: fixed typo
-
-1999-09-24  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/ChangeLog: Typos corrected.
-
-1999-09-21  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_haup/lirc_haup.c: fixed request_module() problem
-	hm, why can't you use the return value ?
-
-1999-09-16  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* doc/html-source/install.html: added updating infos
-
-1999-09-16  denis  <denis@ww-gk3>
-
-	* drivers/lirc_aver/lirc-aver-2.2.10.patch.gz:
-	Patch against kernel 2.2.10 for AverMedia lirc driver functionality.
-
-1999-09-15  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* tools/mode2.c, tools/smode2.c, tools/xmode2.c:
-	allow only MODE2 drivers
-
-1999-09-13  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* ANNOUNCE, INSTALL, README, doc/html-source/doc.html, doc/html-source/foot.html, doc/html-source/programs.html:
-	writing docs...
-
-	* doc/html-source/configure.html, doc/html-source/doc.html, doc/html-source/foot.html, doc/html-source/head1.html, doc/html-source/head2.html, doc/html-source/help.html, doc/html-source/install.html, doc/html-source/programs.html, doc/html-source/technical.html, doc/Makefile.am, doc/images/diode.gif, doc/images/lirc.gif, doc/images/marb18.jpg, doc/release-html.sh:
-	started to write some docu... (thanks to Karsten)
-
-	* TODO, configure.in, contrib/lircd.conf, daemons/ir_remote.c, daemons/ir_remote.h, daemons/lircd.c, tools/Makefile.am, tools/irexec.c, tools/irpty.c, tools/irw.c, tools/irxevent.c, tools/lirc_client.c, tools/lirc_client.h, tools/mode2.c, ANNOUNCE, AUTHORS, Makefile.am, NEWS:
-	moved lirc_client into a library
-
-1999-09-12  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* NEWS, TODO, daemons/irrecord.c, setup.sh:
-	changes not worth mentioning
-
-1999-09-09  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/ChangeLog, drivers/lirc_fly98/README:
-	Docs (Readme, ChangeLog) corrected and updated.
-
-1999-09-07  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_haup/lirc_haup.c: added missng &'s
-
-	* configure.in, tools/irxevent.c:
-	merged with irxevent-0.5.0 with small modifications
-
-1999-09-06  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* NEWS, TODO, configure.in, daemons/Makefile.am, daemons/hw_irman.c, daemons/hw_irman.h, daemons/hw_logitech.c, daemons/hw_logitech.h, daemons/hw_pixelview.c, daemons/hw_pixelview.h, daemons/ir_remote.c, daemons/ir_remote.h, daemons/irrecord.c, daemons/serial.c, drivers/Makefile.am, drivers/irman/.cvsignore, drivers/irman/Makefile.am, drivers/irman/lirmand.c:
-	removed lirmand,
-	added support of shift encoded remotes to irrecord
-
-1999-09-02  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/config_file.c, daemons/config_file.h, daemons/dump_config.c, daemons/dump_config.h, daemons/hardware.h, daemons/hw_default.c, daemons/hw_default.h, daemons/hw_logitech.c, daemons/hw_logitech.h, daemons/hw_pixelview.c, daemons/hw_pixelview.h, daemons/ir_remote.c, daemons/ir_remote.h, daemons/irrecord.c, drivers/Makefile.am, drivers/irman/lirmand.c, drivers/lirc.h, drivers/lirc_parallel/lirc_parallel.c, drivers/lirc_serial/lirc_serial.c, tools/mode2.c, tools/smode2.c, tools/xmode2.c:
-	changed type of all signal related data to lirc_t,
-	this should fix incompatibilities with Alphas
-
-1999-08-30  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/irrecord.c: implemented repeat code support,
-	thanks to Joachim Groh for suggestions
-
-1999-08-25  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* tools/xmode2.c: fixed typos
-
-1999-08-24  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* tools/xmode2.c: uploaded new version from Heinrich Langos,
-	modified it a bit on occation
-
-1999-08-18  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/lircd.c: added debug option
-
-1999-08-16  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/kbttv2211-gpiomon.diff:
-	Small bugs (typos) in the patch fixed.
-	Verified that it works with stock 2.2.11 kernel.
-
-1999-08-15  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/hw_default.c: improved sync
-
-1999-08-15  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/kbttv2211-gpiomon.diff:
-	Added patch for version 2.2.11 of the linux kernel.
-
-1999-08-13  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/hw_logitech.c, daemons/hw_pixelview.c, daemons/irrecord.c:
-	further improved irrecord
-
-	* daemons/ir_remote.c: added heuristic for repeats
-
-	* daemons/hw_default.c, drivers/lirc_serial/lirc_serial.c:
-	moved noise filter to device driver
-
-1999-08-12  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* configure.in, daemons/hw_logitech.c, daemons/hw_logitech.h, setup.sh:
-	added support of Logitech/AST receiver
-	many thanks to Isaac Lauer for the patch
-
-	* daemons/Makefile.am, daemons/hw_default.h, daemons/hw_pixelview.c, daemons/ir_remote.h, daemons/irrecord.c, tools/Makefile.am, tools/irrecord.c:
-	moved irrecord to daemons directory
-	started to rewrite irrecord
-	this version is far from being usable
-
-	* daemons/hw_default.c: added noise filter
-
-1999-08-07  denis  <denis@ww-gk3>
-
-	* setup.sh:
-	Fixed tiny mistake with AverMadia
-
-1999-08-06  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* acconfig.h, configure.in, daemons/Makefile.am, drivers/lirc_aver/.cvsignore, drivers/lirc_fly98/.cvsignore, drivers/lirc_haup/.cvsignore, drivers/lirc_serial/lirc_serial.c, setup.sh:
-	automatic install of config files
-	receiver only support in lirc_serial
-
-1999-08-04  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/lircmd.c, drivers/Makefile.am, drivers/lirc_pixview/.cvsignore, drivers/lirc_pixview/Makefile.am, drivers/lirc_pixview/lirc_pixview.c, remotes/pixelview/lircd.conf.playtv, setup.sh, configure.in:
-	added Nathan Hand's patch for Pixelview TV cards
-
-	* drivers/lirc_haup/lirc_haup.h, drivers/lirc_haup/lirc_haup.c:
-	implemented buffer
-	added request_module for bttv
-	fixed bug in locking
-
-1999-08-03  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* .cvsignore, daemons/.cvsignore, drivers/.cvsignore, drivers/irman/.cvsignore, drivers/lirc_aver/.cvsignore, drivers/lirc_fly98/.cvsignore, drivers/lirc_haup/.cvsignore, drivers/lirc_parallel/.cvsignore, drivers/lirc_serial/.cvsignore, tools/.cvsignore:
-	added .cvsignore files
-
-	* drivers/lirc_aver/Makefile.am, drivers/lirc_fly98/Makefile.am, drivers/lirc_haup/Makefile.am, drivers/lirc_parallel/Makefile.am, drivers/lirc_serial/Makefile.am:
-	Makefiles should now be complete
-
-	* daemons/hw_default.c: forgot a FIXME ;-)
-
-	* daemons/Makefile.am, daemons/hw_default.c: small fixes
-
-	* daemons/lircmd.c: new directive: TOGGLE_ACTIVATE
-
-	* remotes/avermedia/lircd.conf.avermedia, remotes/avermedia/lircmd.conf.avermedia, remotes/life-view/lircd.conf.fly98, remotes/life-view/lircmd.conf.fly98:
-	adjusted config files to use new features
-
-1999-08-03  jochym  <jochym@ww-gk3>
-
-	* README, remotes/fly98/lircd.conf.fly98, remotes/fly98/lircmd.conf.fly98, remotes/fly98/lircrc.fly98, remotes/life-view/lircd.conf.fly98, remotes/life-view/lircmd.conf.fly98, remotes/life-view/lircrc.fly98:
-	Small additional rearangements
-
-	* drivers/lirc_fly98/README: *** empty log message ***
-
-	* drivers/lirc_fly98/ChangeLog, drivers/lirc_fly98/Makefile.am, drivers/lirc_fly98/README, drivers/lirc_fly98/kbttv2210-gpiomon.diff, drivers/lirc_fly98/lirc_fly98.c, drivers/lirc_fly98/lirc_fly98.h:
-	Changed Makefile.am to conform to the rest of the tree. Small modyfication
-	of kernel patch (tristate changed to bool in Config.in). Clean-ups.
-	No real bugs found so far. README modyfied to adapt to this changes.
-	Example configurations moved to live-view directory.
-
-1999-08-02  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/config_file.c, daemons/hardware.h, daemons/hw_default.c, daemons/hw_default.h, daemons/hw_pixelview.c, daemons/hw_pixelview.h, daemons/ir_remote.c, daemons/ir_remote.h, daemons/lircd.c, daemons/lircd.h, daemons/serial.c, daemons/serial.h, drivers/Makefile.am, tools/Makefile.am, acconfig.h, configure.in, daemons/Makefile.am, setup.sh:
-	reorganisation of lircd's code
-	added support for Pixelview RemoteMaster
-
-	* drivers/lirc_haup/Makefile.am, drivers/lirc_haup/lirc_haup.c, drivers/lirc_haup/lirc_haup.h, remotes/hauppauge/lircmd.conf.hauppauge:
-	uploaded *working* Hauppauge driver
-	many thanks to Matti Airas for making it finally work
-
-	* drivers/lirc_parallel/Makefile.am, drivers/lirc_serial/Makefile.am:
-	added config.h to dependencies
-
-1999-08-02  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/README: nstalation instructions added
-
-	* README, drivers/lirc_fly98/ChangeLog, drivers/lirc_fly98/README, drivers/lirc_fly98/bttv063-gpiomon.diff, drivers/lirc_fly98/lirc_fly98.c, drivers/lirc_fly98/lirc_fly98.h, remotes/fly98/lircd.conf.fly98, remotes/fly98/lircmd.conf.fly98, remotes/fly98/lircrc.fly98:
-	Finally a working setup. Further clean-up of the kernel patch (got it
-	even smaller). Configuration files for lircd, lircmd and ~/.lircrc.
-	Lock-up in the bttv caused by wrong initialization order removed.
-	External bttv patch not fully tested yet. Internal version 0.1. BETA.
-
-1999-08-01  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/kbttv2210-gpiomon.diff:
-	Even smaller patch. Only gpiomonitor function added. remote.c removed
-	from the kernel - all is handled by the lirc_fly98.o module.
-	Better integrated with menuconfig of the kernel.
-	Lockup fixed - better update your driver!
-
-	* drivers/lirc_fly98/ChangeLog: Change log file
-
-1999-07-30  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* contrib/lirc.m4: m4 macros to check for LIRC support
-
-	* acinclude.m4, configure.in, drivers/lirc_parallel/Makefile.am, drivers/lirc_serial/Makefile.am:
-	further changes for kernel Makefile usage
-
-1999-07-27  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/ir_remote.c:
-	bug-fix for LIRC_MODE_CODE and LIRC_MODE_LIRCCODE,
-	all buttons on Hauppauge remote control should work now
-
-1999-07-27  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/lirc_fly98.c:
-	Error code returned by read function changed from -EIO to -EFAULT
-
-	* drivers/lirc_fly98/Makefile.am:
-	Default location of the kernel sources changed to more standard dir.
-
-1999-07-27  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* configure.in, drivers/lirc_parallel/Makefile.am, drivers/lirc_parallel/lirc_parallel.c, drivers/lirc_serial/Makefile.am, drivers/lirc_serial/lirc_serial.c:
-	drivers now use kernel Makefile to compile,
-	this fixes some long known problems
-
-	* acinclude.m4: additional m4 macros
-
-1999-07-27  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/bttv063-gpiomon-0.0.2.diff:
-	*** empty log message ***
-
-	* README: Note for FlyVideo98 added
-
-	* drivers/lirc_fly98/Makefile.am:
-	Errors corrected. Added location of the kernel source as a param.
-
-	* drivers/lirc_fly98/README: Small notes about configuration added
-
-	* drivers/lirc_fly98/lirc_fly98.c, drivers/lirc_fly98/lirc_fly98.h:
-	Minor cleanup of the driver. Poll function added. Bugfixes.
-	Supports patched kernel and external bttv drivers.
-
-	* drivers/lirc_fly98/bttv063-gpiomon.diff, drivers/lirc_fly98/kbttv2210-gpiomon.diff:
-	Patches for bttv-0.6.3 and kernel bttv 2.2.10.
-	They implement GPIO monitoring hook into the bttv driver.
-	Version 0.0.3
-
-1999-07-26  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/README: First README version - only short notice.
-
-	* drivers/lirc_fly98/bttv063-gpiomon-0.0.2.diff, drivers/lirc_fly98/lirc_fly98.h:
-	Patch for the bttv-0.6.3 driver to support GPIO monitoring by
-	external modules. Supports interupt driven reading (no polling).
-	Removed some traces of remote control driver dependence. Changed masks
-	of the interupt mask register. All keys on the remote are properly read
-	(even power key with id=0).
-
-	lirc_fly98.h - header file for the remote control driver.
-
-	* drivers/lirc_fly98/lirc_fly98.c:
-	New version of the driver. Cleaner interface to the bttv driver.
-	LIRC_MODE_CODE mode reading with blocking reads. IOCTRL interface
-	implemented. True interrupt driven readout in the bttv patch.
-	Multi-character reading commented out. Support for multiple cards.
-
-1999-07-24  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_serial/lirc_serial.c:
-	fixes for 2.3.x kernels (thanks to Adam Fritzler for the patch),disabled interrupts during transmission
-
-1999-07-23  jochym  <jochym@ww-gk3>
-
-	* drivers/lirc_fly98/lirc_fly98.c:
-	Added author ID to the FlyVideo98 driver
-
-1999-07-21  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* Makefile.am, NEWS, daemons/ir_remote.c, drivers/lirc_parallel/lirc_parallel.c, drivers/lirc_parallel/lirc_parallel.h:
-	several small changes
-
-1999-07-08  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* Makefile.am: added setup.sh
-	added rcs2log call for 'make dist'
-
-	* daemons/Makefile.am, daemons/ir_remote.c: maintainer-mode fixes
-
-	* tools/irrecord.c: added debug code
-
-	* drivers/lirc_fly98/lirc_fly89.c, drivers/lirc_fly98/lirc_fly98.c:
-	renamed file
-
-1999-06-29  nic  <nic@ww-gk3>
-
-	* setup.sh: *** empty log message ***
-
-1999-06-21  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/config_file.c, daemons/dump_config.c, daemons/ir_remote.c, daemons/ir_remote.h, daemons/lircd.h, tools/irrecord.c:
-	support for different modulation frequencies (currently transmission only)
-
-	* daemons/ir_remote.c, daemons/ir_remote.h, daemons/lircd.c:
-	send_command() returns errors
-
-1999-06-19  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* NEWS, tools/lirc_client.c, tools/lirc_client.h:
-	added new feature to .lircrc config file
-
-1999-06-14  denis  <denis@ww-gk3>
-
-	* drivers/lirc_serial/Makefile.am, drivers/lirc_parallel/Makefile.am, drivers/lirc_haup/Makefile.am, drivers/lirc_fly98/Makefile.am:
-	module_SCRIPTS changed to module_DATA.
-	Run "depmod -a" after installation.
-
-	* contrib/conf.modules.aver:
-	/etc/conf.modules file for autoload lirc_aver driver.
-
-	* contrib/lirc.redhat: RedHat 5.x init script
-
-	* drivers/lirc_aver/lirc_aver.c: Changed indentation from 2 to 8 chars.
-
-1999-06-11  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* tools/lirc_client.c: potential memory leak fixed
-
-1999-06-08  denis  <denis@ww-gk3>
-
-	* remotes/avermedia/lircd.conf.avermedia:
-	Support for new 8-bit LIRC_MODE_CODE mode added.
-	Repeat bit support added.
-
-	* drivers/lirc_aver/lirc_aver.c: Compilation with new lirc fixed.
-	New lirc ioctl interface added.
-	Main lirc config.h file added.
-	"major" module option added.
-	Repeat code with "repeat_bit" implemented.
-
-	* drivers/lirc_aver/Makefile.am:
-	Changed .o file representation from module_SCRIPTS to module_DATA
-	because of installed file permissions.
-	Added module dependencies generation (depmod -a) after intallation.
-
-	* configure.in: Added 'depmod' program search.
-	Fixed return value from ${withval} to ${enableval} after AC_ARG_ENABLE.
-	Commented out SHELL redefinition.
-
-1999-05-28  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/lircd.c: lircd could be blocked by applications
-
-1999-05-15  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/Makefile.am, daemons/ir_remote.c: added maintainer mode
-
-1999-05-14  wheeley  <wheeley@ww-gk3>
-
-	* drivers/irman/lirmand.c: hopefully fixed buggy daemonization
-
-	* drivers/Makefile.am: added lirc.h to distribution
-
-	* acconfig.h, configure.in, daemons/Makefile.am, daemons/lircd.c:
-	added maintainer mode
-
-1999-05-10  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_parallel/lirc_parallel.c, drivers/lirc_serial/lirc_serial.c:
-	now works with 2.0.x kernels
-
-1999-05-07  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* tools/Makefile.am, tools/mode2.c: added mode2, I need it
-
-	* tools/irrecord.c: added some debug code
-
-1999-05-06  wheeley  <wheeley@ww-gk3>
-
-	* drivers/irman/lirmand.c: incorporated signal patch from yoann
-
-	* autogen.sh: added to repository
-
-1999-05-06  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/lircd.c, daemons/lircmd.c:
-	added config-file argument to daemons' command line
-
-1999-05-05  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* daemons/ir_remote.c, daemons/ir_remote.h, daemons/lircd.c, daemons/lircd.h, drivers/lirc.h, drivers/lirc_parallel/lirc_parallel.c, drivers/lirc_serial/lirc_serial.c, tools/irrecord.c:
-	added new ioctl interface to lircd, lirc_parallel, lirc_serial
-
-	* drivers/lirc_aver/Makefile.am, drivers/lirc_fly98/Makefile.am, drivers/lirc_haup/Makefile.am, drivers/lirc_parallel/Makefile.am, drivers/lirc_serial/Makefile.am:
-	corrected mknod call
-
-1999-05-04  wheeley  <wheeley@ww-gk3>
-
-	* drivers/irman/lirmand.c: fixed signal problem in lirmand.c
-
-1999-05-04  rggammon  <rggammon@ww-gk3>
-
-	* AUTHORS, configure.in, daemons/ir_remote.c, daemons/lircd.c, drivers/Makefile.am, drivers/lirc.h, drivers/lirc_aver/Makefile.am, drivers/lirc_aver/lirc_aver.c, drivers/lirc_fly98/Makefile.am, drivers/lirc_fly98/lirc_fly89.c, drivers/lirc_haup/Makefile.am, drivers/lirc_haup/lirc_haup.c, lirc-bttv-2.2.7.patch.gz, remotes/avermedia/lircd.conf.avermedia, remotes/avermedia/lircmd.conf.avermedia, remotes/fly98/lircd.conf.fly98, remotes/fly98/lircmd.conf.fly98:
-	Added patches for Avermedia, Fly98, and Hauppague tv cards. These all need
-	various degrees of work. Also includes an experimental ioctl interface for
-	the avermedia driver.
-
-1999-05-03  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* drivers/lirc_parallel/lirc_parallel.c:
-	fixed stupid bug that has overwritten the control register
-
-1999-04-29  Christoph Bartelmus  <columbus@ww-gk3>
-
-	* ANNOUNCE, AUTHORS, COPYING, ChangeLog, Makefile.am, NEWS, TODO, acconfig.h, configure.in, contrib/irman2lirc, contrib/lirc.debian, contrib/lirc.suse, contrib/lircd.conf, contrib/lircmd.conf, contrib/lircrc, daemons/Makefile.am, daemons/config_file.c, daemons/config_file.h, daemons/dump_config.c, daemons/dump_config.h, daemons/ir_remote.c, daemons/ir_remote.h, daemons/lircd.c, daemons/lircd.h, daemons/lircmd.c, drivers/Makefile.am, drivers/irman/Makefile.am, drivers/irman/lirmand.c, drivers/lirc_parallel/Makefile.am, drivers/lirc_parallel/lirc_parallel.c, drivers/lirc_parallel/lirc_parallel.h, drivers/lirc_serial/Makefile.am, drivers/lirc_serial/lirc_serial.c, remotes/animax/lircd.conf.animax, remotes/animax/lircmd.conf.animax, remotes/hauppauge/lircd.conf.hauppauge, remotes/life-view/lircd.conf.FlyVideo_II, remotes/packard_bell/lircd.conf.packard_bell, tools/Makefile.am, tools/irexec.c, tools/irpty.c, tools/irrecord.c, tools/irw.c, tools/irxevent.c, tools/lirc_client.c, tools/lirc_client.h, tools/smode2.c, tools/xmode2.c:
-	changed revision to reflect current lirc version
-
-	* tools/irrecord.c: Imported sources.
-
-	* tools/irrecord.c: New file.
-
-	* tools/irexec.c, tools/irpty.c, tools/irw.c, tools/lirc_client.c, tools/lirc_client.h:
-	Imported sources.
-
-	* tools/irexec.c, tools/irpty.c, tools/irw.c, tools/lirc_client.c, tools/lirc_client.h:
-	New file.
-
-	* tools/irxevent.c: Imported sources.
-
-	* tools/irxevent.c: New file.
-
-	* tools/xmode2.c: Imported sources.
-
-	* tools/xmode2.c: New file.
-
-	* tools/Makefile.am, tools/smode2.c: Imported sources.
-
-	* tools/Makefile.am, tools/smode2.c: New file.
-
-	* daemons/dump_config.c, daemons/dump_config.h: Imported sources.
-
-	* daemons/dump_config.c, daemons/dump_config.h: New file.
-
-	* daemons/lircmd.c: Imported sources.
-
-	* daemons/lircmd.c: New file.
-
-	* daemons/config_file.h: Imported sources.
-
-	* daemons/config_file.h: New file.
-
-	* daemons/config_file.c, daemons/ir_remote.h, daemons/lircd.h:
-	Imported sources.
-
-	* daemons/config_file.c, daemons/ir_remote.h, daemons/lircd.h:
-	New file.
-
-	* daemons/ir_remote.c: Imported sources.
-
-	* daemons/ir_remote.c: New file.
-
-	* daemons/lircd.c: Imported sources.
-
-	* daemons/lircd.c: New file.
-
-	* daemons/Makefile.am: Imported sources.
-
-	* daemons/Makefile.am: New file.
-
-	* drivers/irman/lirmand.c: Imported sources.
-
-	* drivers/irman/lirmand.c: New file.
-
-	* drivers/irman/Makefile.am, drivers/lirc_parallel/lirc_parallel.c, drivers/lirc_parallel/lirc_parallel.h:
-	Imported sources.
-
-	* drivers/irman/Makefile.am, drivers/lirc_parallel/lirc_parallel.c, drivers/lirc_parallel/lirc_parallel.h:
-	New file.
-
-	* drivers/lirc_parallel/Makefile.am: Imported sources.
-
-	* drivers/lirc_parallel/Makefile.am: New file.
-
-	* drivers/lirc_serial/lirc_serial.c: Imported sources.
-
-	* drivers/lirc_serial/lirc_serial.c: New file.
-
-	* contrib/lirc.debian, drivers/Makefile.am, drivers/lirc_serial/Makefile.am:
-	Imported sources.
-
-	* contrib/lirc.debian, drivers/Makefile.am, drivers/lirc_serial/Makefile.am:
-	New file.
-
-	* contrib/irman2lirc, contrib/lirc.suse, contrib/lircd.conf, contrib/lircmd.conf, contrib/lircrc, remotes/packard_bell/lircd.conf.packard_bell:
-	Imported sources.
-
-	* contrib/irman2lirc, contrib/lirc.suse, contrib/lircd.conf, contrib/lircmd.conf, contrib/lircrc, remotes/packard_bell/lircd.conf.packard_bell:
-	New file.
-
-	* remotes/animax/lircd.conf.animax, remotes/animax/lircmd.conf.animax, remotes/hauppauge/lircd.conf.hauppauge, remotes/life-view/lircd.conf.FlyVideo_II:
-	Imported sources.
-
-	* remotes/animax/lircd.conf.animax, remotes/animax/lircmd.conf.animax, remotes/hauppauge/lircd.conf.hauppauge, remotes/life-view/lircd.conf.FlyVideo_II:
-	New file.
-
-	* ANNOUNCE, ChangeLog, configure.in: Imported sources.
-
-	* ANNOUNCE, ChangeLog, configure.in: New file.
-
-	* NEWS, TODO, acconfig.h: Imported sources.
-
-	* NEWS, TODO, acconfig.h: New file.
-
-	* COPYING, Makefile.am: Imported sources.
-
-	* COPYING, Makefile.am: New file.
-
-	* AUTHORS: Imported sources.
-
-	* AUTHORS: New file.
-