RE: [Linuxwacom-devel] WACOM: graphire3 6x8, USB.

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Hello Ping,

I am not sure the CVS tarball you sent me was Ok, gzip complained about it:
tar xfz ../zipped/linuxwacom-dev.tar.gz
gzip: stdin: decompression OK, trailing garbage ignored
tar: Child returned status 2
tar: Error exit delayed from previous errors

In any case, I built the driver and the tablet works. My OS is SuSE 8.2 Pro,
in case you care. I used this configure command:

./configure --enable-wacomdrv --with-kernel=/usr/src/linux-2.4.20.SuSE
--with-xf86=/usr/src/packages/BUILD --enable-input --enable-mousedev
--enable-hid --enable-usbmouse --enable-evdev

I also had to install the XFree86-4.3.0 source RPM and run "rpm -bc
SPECS/XFree86.spec" to get the XFree86 tree properly configured, but other
than that the build went smoothly.

Thank you,
	Paul.

On Wed, 24 Sep 2003, Ping Cheng wrote:

> Hi Paul,
>
> 0.5.2-beta doesn't support Graphire3. But, the version in CVS does. I am
> attaching the CVS tar ball in case you have problem to get the files from
> CVS.
>
> Please do the following to build and install the new driver:
>
> unzip and untar linuxwacom-dev.tar.gz
>
> cd linuxwacom-dev
> ./bootstrap
> aclocal
> ./configure --enable-wacomdrv --with-kernel=yourkernel-src-dir
> --with-xf86=yourXFree86-src-dir --enable-input --enable-mousedev
> --enable-hid --enable-usbmouse --enable-evdev make
> su
> make install
> cp src/wacom_drv.o /usr/X11R6/lib/modules/input
> cp hid*.o /lib/modules/your_kernel_version/kernel/drivers/usb
> cp usbmouse.o /lib/modules/your kernel version/kernel/drivers/usb
> cp wacom.o /lib/modules/your_kernel_version/kernel/drivers/usb
> cp evdev.o /lib/modules/your kernel version/kernel/drivers/input
> cp mousedev.o /lib/modules/your kernel version/kernel/drivers/input
> cp input.o /lib/modules/your kernel version/kernel/drivers/input
>
> Restart your system and login as yourslef to use the new driver. Please let
> me know if it works for you or not. You can also launch wacomcpl from a
> shell prompt to see if any functionality there helps you.
>
> Ping
>
> -----Original Message-----
> From: Paul Koshevoy [mailto:pa...@ba...]
> Sent: Tuesday, September 23, 2003 10:47 PM
> To: je...@j-...
> Cc: lin...@li...
> Subject: [Linuxwacom-devel] WACOM: graphire3 6x8, USB.
>
>
> Hi John,
>
> I've just got a brand new graphire 3, 6x8 USB tablet.
> I've tried the 0.5.2 driver, it seems that my tablet is not yet supported.
>
> Here is a screen dump of what I get from wacdump:
>
> wacdump v0.5.2
>
> MODEL=Wacom Graphire2 6x8               ROM=3.1-2
> CLS=USB  VNDR=Wacom  DEV=Graphire3  SUB=MODEL_G3_0608
>
> 7D 2E 71 3F 28 1A 02 00 01 00 10 01 01 00 00 00             }.q?(...........
>
>
>   BUTTON=+00001 (+00000 .. +00000)      RELWHEEL=-00002 (-00001 .. +00001)
>
>     LEFT=DOWN         MIDDLE=              RIGHT=              EXTRA=
>     SIDE=              TOUCH=             STYLUS=            STYLUS2=
>
> I noticed that there is no pressure or position data.
> There is also this stuff in the /var/log/XFree86.0.log:
>
> (II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
> (II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
> (II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
> (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
> (**) Option "Device" "/dev/input/event0"
> (==) Wacom Kernel Input device name: "WACOM CTE-630-UV3.1-2"
> (==) Wacom tablet maximum X=0 maximum Y=0 X resolution=0 Y resolution=0
> suppress =0
> (==) Wacom tablet top X=0 top Y=0 bottom X=0 bottom Y=0
> (==) Wacom tablet top X=0 top Y=0 bottom X=0 bottom Y=0
> (==) Wacom tablet top X=0 top Y=0 bottom X=0 bottom Y=0
> (II) Mouse0: ps2EnableDataReporting: succeeded
> wacom: relative event received (1)!!!
> wacom: relative event received (0)!!!
> wacom: relative event received (1)!!!
> wacom: relative event received (0)!!!
>
> Do you need anything else from me in order to add support for this tablet to
> the driver?
>
> Thank you,
> 	Paul.
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf _______________________________________________
> Linuxwacom-devel mailing list Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linuxwacom-devel
>
>