From: Christine T. <chr...@di...> - 2003-08-22 20:23:37
|
Hi, I use a Wacom Intuos2 6x8 serial tablet. I have installed the last Wacom driver (beta5.2), since I have a TwinView configuration and this feature is not supported in beta5.1. I use a NVidia FX3000 board with 45.30 driver. In fact, I have recompiled the beta5.2 driver from scratch since margins did not seem to be handled properly with the prebuilt wacom_drv.o Now margins work fine, but when I try to change the video mode (using xvidtune), the tablet stops working. I noticed the same behaviour with the beta5.1 wacom driver. If I remove the TwinView mode from my XF86Config file, everything works fine again (with both beta5.1 and beta5.2 drivers). Here is the error I can read in the XFree.0.log file (using a debuglevel of 10). As soon as I change the video mode, there is a "bad magic" detection in the xf86WcmSerialValidate function and the tablet stops working: ======================================================================== (II) NVIDIA(0): Setting mode "1920x1154x5994,1920x1154x5994" xf86WcmDevReadPacket: device=/dev/ttyS1 fd=12 pos=7 remaining=249 xf86WcmReadPacket buffer has 24 bytes packet header = 0xe0 xf86WcmEvent: c=0 i=2130 t=1 s=0x2A027DB x=3820 y=5957 b=0x0 p=0 rz=0 tx=1 ty=7 aw=0 rw=0 t=0 df=0 px=64 st=721204642 xf86FilterIntuos: CHG 3808,5965 => 3820,5957 commonDispatchEvents [stylus] prox=true x=3808 y=5965 z=0 b=false b=0 tx=1 ty=7 wl=0 rot=0 th=0 [wacom] abs prox=64 x=3808 y=5965 z=0 button=false buttons=0 xf86WcmSetScreen xf86WcmDevConvert Wacom converted v0=1808 v1=3965 to x=213 y=374 Wacom converted x=213 y=374 to v0=1811 v1=3967 xf86WcmSerialValidate: bad magic at -1 v=0x83372d1 l=9 packet header = 0x15 unknown wacom V packet 0x15 MOVE 6 bytes xf86WcmDevReadPacket: device=/dev/ttyS1 fd=12 pos=6 remaining=250 xf86WcmReadPacket buffer has 14 bytes xf86WcmSerialValidate: bad magic at -1 v=0x83372c8 l=9 packet header = 0x15 unknown wacom V packet 0x15 MOVE 5 bytes xf86WcmDevReadPacket: device=/dev/ttyS1 fd=12 pos=5 remaining=251 xf86WcmReadPacket buffer has 13 bytes xf86WcmSerialValidate: bad magic at -1 v=0x83372c8 l=9 packet header = 0x7 unknown wacom V packet 0x7 MOVE 4 bytes GetModeLine - scrn: 0 clock: 164350 GetModeLine - hdsp: 1920 hbeg: 2000 hend: 2144 httl: 2312 vdsp: 1154 vbeg: 1157 vend: 1160 vttl: 1186 flags: 0 xf86WcmDevReadPacket: device=/dev/ttyS1 fd=12 pos=4 remaining=252 xf86WcmReadPacket buffer has 12 bytes xf86WcmSerialValidate: bad magic at -1 v=0x83372c8 l=9 packet header = 0x7 unknown wacom V packet 0x7 ..... =========================================================================== I have also attached my XF86Config with the TwinView section that I use. Do you have any idea?? This is really anoying, since I really need TwinView mode and the tablet working together in my application. Thank you -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Christine Tassan Software Developer - Linux team Tel: 514-954-7443 Discreet, 10 rue Duke Fax: 514-393-0110 Montreal (Quebec), Canada, H3C 2L7 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |