From: <re...@co...> - 2003-02-26 18:27:40
|
Hi... Im using an Interphase 5525/5575 ATM Adapter (155 Mbit) on Redhat linux 7.3 and I experiencing some problems when zeppeling is loading, the error message is: # zeppelin zeppelin:main.c: Our ATM address: linux zeppelin:conn.c: connect error: Connection refused zeppelin:lec.c: LECS said: No Configuration zeppelin:lec.c: Parsing LE_CONFIG_RESPONSE indicates failure zeppelin:main.c: Our ATM address: linux zeppelin:conn.c: connect error: Connection refused zeppelin:lec.c: LECS said: No Configuration zeppelin:lec.c: Parsing LE_CONFIG_RESPONSE indicates failure zeppelin:main.c: Our ATM address: linux zeppelin:conn.c: connect error: Connection refused zeppelin:lec.c: LECS said: No Configuration zeppelin:lec.c: Parsing LE_CONFIG_RESPONSE indicates failure # atmaddr -n 39.0348.8001BC900001015A2C30.00007795274A.00 dmesg shows: atm_connect (TX: cl 1,bw 0-0,sdu 484; RX: cl 1,bw 0-0,sdu 484,AAL 5) atm_connect (TX: cl 1,bw 0-0,sdu 484; RX: cl 1,bw 0-0,sdu 484,AAL 5) atm_connect (TX: cl 1,bw 0--1,sdu 1516; RX: cl 1,bw 0-0,sdu 1516,AAL 5) lec0: Shut down! atm_connect (TX: cl 1,bw 0--1,sdu 1516; RX: cl 1,bw 0-0,sdu 1516,AAL 5) lec0: Shut down! lec0: Shut down! atm_connect (TX: cl 1,bw 0--1,sdu 1516; RX: cl 1,bw 0-0,sdu 1516,AAL 5) lec0: Shut down! atm_connect (TX: cl 1,bw 0--1,sdu 1516; RX: cl 1,bw 0-0,sdu 1516,AAL 5) lec0: Shut down! atm_connect (TX: cl 1,bw 0--1,sdu 1516; RX: cl 1,bw 0-0,sdu 1516,AAL 5) lec0: Shut down! everything seemed to be ok (following the howto and , and Marki kisskilä's tessis), the xylan omniswitch sees the linux box trying to join the elan, but failing inmediately after. I obtain the same results when using .lecs_conf and without it, the definition made on the file is: # cat .lecs_conf 3903488001BC900001015A2C3000007795274A00 #lec0 [elan1] LES:=3903488001BC900001015A2C3000007795274A01 Type:=Ethernet Max_Frame:=1516 #lec1 [elan2] LES:=3903488001BC900001015A2C3000007795274A02 Type:=Ethernet Max_Frame:=1516 DEFAULT ### End of file # grep linux /etc/hosts.atm 39.0348.8001BC900001015A2C30.00007795274A.00 linux I've been tested, using the init scripts wich come with the linux-atm package, loading each program by hand (ex: atmsigd -u uni31 -b, ilmid -u 31 -b, zeppelin &, etc...) following the howto with no success after all, is there any way to find out where the error is? there are other boxes joining the elans with the same atm adaptors just using other operative systems. I've been browsing the mail list archive, and found several opinions of people who achieved tasks like the one I'm trying to (they don mention how they do it), but there are others saying that the only way to do the joining is by setting static PNNI routes on the switch and setting addresses manually on linux, is there a document on how to do it properly? thanks in advance... ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ |