Re: [K3b-user] K3b 1.0.1 eject problem

[<vm...@ar...>]

Am Mittwoch, 20. Juni 2007 10:38 schrieb Sebastian Tr=FCg:
> On Tuesday 19 June 2007 20:26:18 vm...@ar... wrote:
> > I attach a K3b output below
> > (DVD+R VIDEO, in this case the DVD is not ejected, K3b is patched with
> > k3bdevice.diff from the previous mail but without changes in "bool
> > K3bDevice::Device::open( bool write ) const").
> > There are many comments which I inserted into K3b. But
> > after "run()" one can see, that K3b is busy with "*name =3D /dev/sr0"
> > device. (The important messages are after:
> > "***ooo_x1_in  ::slotProcessExited( KProcess* p )" ).
> > x1_in means: Input
> > x1_out means: Output
>
> This is already very good help. The sr0 messages, however, are irrelevant
> since k3b just regularly checks for media changes. Is it possible for you
> to remove that device? Is it an external one? Because that would probably
> make the output easier to read.
> thanks a lot for your efforts.
>
> Cheers,
> sebastian
>
> -------------------------------------------------------------------------
I attach a K3b output below.

K3b is patched=20
(with k3bdevice.diff, which I sent in an earlier mail,
the changes should be only in:
=A0"bool K3bDevice::Device::open( bool write ) const")

I disconnected the sr0 device (it is an internal one).

The DVD+R (VIDEO) ejects=20
(see "ooo_x12_in   ::eject() const" in the output)
and I can quit K3b.